Onewheel GT Custom Shaping 3.0!
Vložit
- čas přidán 9. 07. 2024
- Custom Shaping 3.0 is here and ready to expand minds. We put the rider in the drivers seat with the ability to customize Base Shaping Settings and advanced control of turning dynamics, acceleration, deceleration and sensor pad behavior. What does that mean? Well, your GT just got a lot better.
0:00 What is Custom Shaping 3.0?
1:18 Base Shaping
1:41 Stance Profile
1:51 Braking Aggressiveness
2:07 Aggressiveness Profile
3:20 Dynamic Responsiveness
3:58 Turn Compensation
5:21 Jump Re-engagement
5:41 Zone Engagement
6:22 Presets
_____________________________
Check us out at www.Onewheel.com and grab yourself a board today!
Onewheel GT: onewheel.com/products/onewhee...
Onewheel Pint X: onewheel.com/products/onewhee...
Onewheel Pint: onewheel.com/products/pint
Onewheel Accessories: onewheel.com/pages/all-access...
DESTROY BOREDOM WITH US
Instagram: / onewheel
TikTok: / onewheel
Twitter: rideonewheel?lang=en
Facebook: / onewheelofficial
SUBSCRIBE TO THE ONEWHEEL NEWSLETTER
onewheel.com/pages/newsletter...
New to the channel? Check out some of our playlists!
The Onewheel Podcast: • The Onewheel Podcast
Onewheel Shred Series: • Onewheel SHRED SERIES
#onewheel #onewheelgt #onewheelpintx - Sport
Giving the Pint X some love would be appreciated
Agreed
If pint x had XR pushback and custom shaping it would be waaaaay better than the GT...
That's why they dont have it for pint x because they want you to buy the expensive board...Wich is sad
Agree. PintX footpads suck too. Terrible activation.
Good Luck
They should apply custom shaping to the Pint X. I don't see that cannibalizing sales of the GT. The GT is still more capable and a bigger platform. Very much a different board
OMG! They added everything we wanted! Single zone, trick delay mode- aggressive flow!!! 🤯
Get out there!
@@Onewheel WE GOT YOU!!! 🔥🔥🔥
They said forget floatlife accessories 😎🤣 love this
And haptic buzz!
@@Onewheel would love to ride but your update bricked my onewheel and your customer service isnt event communicating with me.
Single Zone Gang 😎🙏 Appreciate yall listening to the feedback of the riders and racers!
Cool. You finally caught up to VESC features. Hope you’re working on Pint and Pint X.
Will Pint X ever get custom shaping?
Thank you @onewheel for taking our feedback and applying it. This was a blast to be a part of, and the willingness to push boundries was amazing.
Hope y’all can start fresh from here and keep innovating!
Super excited to see where you take things!
Yea this is a biggie. Excited about what's to come
We couldn't be more stoked on how this turned out. Shout out to all those who patiently waited for this game-changing firmware, we appreciate each and every one of you. A huge thank you to all of the professional riders that provided essential feedback to help make this what it is. We can't wait for all y'all start shaping the future. ***Comment below with what you're most excited about!***
Will custom shaping 3.0 be coming to pint x? Or are you guys just mainly focused on the GT? Feels like you guys have just mainly been focused on the GT and while I think it’s a good idea but please don’t forget about your mid grade riders 🫡
I didn’t think I could wait any longer, thanks for making this the best weekend ever!!!
I started the update, got through the video/slideshow about buzzes, still had to update, it froze in the 40% zone for 10+minutes, so I exited the app, shut the board, restarted everything. Now I've attempted the firmware update 4 more times alwasy getting to the end and it tells me it failed and to try again. THIS SUCKS, HELP ME PLEASE
I'm right there with ya, man! This would be nice to have for the Pint X also. 🤞
Both the shaping and the new Haptic Buzz sound awesome! I'm actually quite impressed that you guys managed to pull off that haptic buzz feature purely through firmware updates. I just updated my GT without issue and briefly tried out the new single zone sensor pad engagement (which is definitely the feature I am most excited about). Ever since the updated GT footpads came out I was having a little bit harder time getting my board to engage 100% of the time, and so far the single zone engagement seems to totally fix this for me. Awesome!
Thank you so much guys! I race Clydesdale and now the board feels so much more powerful down low, and wow the ability to customize is incredible. Great job!
Big time for the big boys!!!
@@Onewheel 🤘🤘
if you really wanna fight off VESC and Floatwheel you should give new custom shaping for XRs PintX and Pints not just the haptic buzz
exactly
Come on FM do it for your business and our community
I bought at EXACTLY the right time.
Proud owner of two boards.
Road one (Pint) around LA for 20 minutes.
Sold for LIFE dudes.
Firmware Friday!!! Thank you guys so much for adding in that single zone sensor option, that is a HUGE relief to racers everywhere. 🙌🙌
Hey there. Definitely not a racer here. I'm curious why this feature is helpful to yall.
You said you wanted it so we had to.
The only thing I find unfortunate, being a Onewheel enthusiast, is that since the release of the GT, it's as if you have forgotten all your previous boards and nothing else exists. Your updates are made solely for the GT, there is nothing left for us who own an XR, which is quite sad.😢
Same. I waited a bit, got the XR, GT dropped 18 months later...
yep meme chose ici. comme si le xr etais mort pour eux... seul option est de vesc ou d'upgrade. mais j'aime tellment mon xr ):
XR has long been discontinued. Time to treat yourself and upgrade to the GT
Unbelievable!! Thanks for releasing it and making so many customization options!!
Glad to have it out. Couldn't have done it without rider feedback!
This feature brought waaaay more value to the GT than I expected. Gearing up and jumping outside now! Thank you guys for finally getting this out!
Let us know what you're playing with. Yew!!
My faster and longer range Vesc based board has these features already and I only paid $1900.
Single zone sensor start should be available for Pint and Pint X :(((
Incredible update overall tho
Would love to see something similar to this for the pint/pint x. At the very least the ability for single zone engagement would be game changing.
Agreed my pint is great for small coffee shop commutes, missing my mount 3 times every stoplight sucks. We need that posi
@@MrDmadness yeah it isn’t crazy hard to do on your own. But a simple button in the app would be a hell of a lot nicer
Just rewheel it it’s that easy
This is so epic, sound like loads of features. Love how many options this gives the board. Totally hit this out the park.
A load of features is right!
This looks crazy good, better than I could’ve ever imagined 🤯
It's pretty dope.
Super SUPER excited for this. Thanks OneWheel! Went above and beyond!
Just getting my board back from your factory today from repairs. So stoked to finally be able to ride again and with CUSTOM SHAPING. I’ve been waiting so long for this.
Stoked for you to experience the magic!
This shaping is insane! I just got the day off work, went rock climbing.. get home and see this?? I could’ve been fine tuning my trail ride! 🔥🔥🔥
This is amazing. Very excited to play around with these 😃
Thank you, Future Motion! One year ago, I discovered the incredible One Wheel, and since then, it has brought me so much joy. On a side note, I used to be an avid mountain biker, but I've realized that I haven't been riding as much lately.😮
Hey, guys, it would be awesome if you guys added a feature to share your custom shapings to the cloud like segments, so people can test each other's tunes.
You can
Awesome update, loved my GT but now its even better, Thanks guys !
Can’t wait to try it. I’m so stoked. Thank you 🙏
I updated today. The first update attempt got to like 15 minutes in, 99% complete, and like 10 seconds from being complete and the update was lost. At that point I was a bit nervous. I was instructed by the app to try again and the light bar was showing the rainbow lights I had heard about so I was wondering a bit, since I couldn't get the regular light bar to come back. I think I tried the second attempt with the light bar in the rainbow state and I think it seemed to pick up the update with only 8 minutes needed to finish. 8 minutes later it completed the update.
The update is really nice!
I feel like the stance profile is really great to get dialed in for each base shape. I only ride streets, so I think nose up or left alone is the only way I will set most of the stances for the different base shapes since I am never really worried about tail drag or anything on the streets, although I guess I could lower the nose on Elevated (which I tend to never use) and test that overall ride feel out someday. This seems like such a worthwhile profile to be able to adjust since each rider is so different from the next when you factor in their weight, or the type of riding they do, etc.
And the aggressiveness profile and the dynamic responsiveness profile each seemed very nice to adjust as well.
First time out today, I enjoyed Flow (which I have not ridden in maybe almost a year after having ridden it a good bit in the summer of 2022) with a nose that was maybe at plus 1. And that was all I changed for Flow and enjoyed its feel.
I liked Apex (which is what I have ridden for the past year it seems) dialed so that the nose was dialed up to a .5 or 1; aggressiveness dialed all the way up (also it seemed the advanced setting of aggressiveness was already dialed all the way up at each of the four stages of speed so I adjusted that graph a little bit but then returned it to all four speed stages dialed up); dynamic responsiveness dialed as tight as possible; and the yaw mix rate was dialed to the fastest.
I am less sure yet about adjusting the roll and yaw for a given base shape and feeling the difference but I am sure if it is worth noting I will catch on as time goes by. My hunch is for my riding preference, and hearing Kyle explain both settings, I am going to like roll and yaw mix rate set to the default or both dialed up, but I will have to see how that feels while riding, when partnered with whatever base shape I am in and all the other settings factored in.
I didn't make any custom shaping presets but I am interested to see if next time when I go for a ride if it saved the modes for Apex and Flow the way I left those two modes by the time I stopped riding today. Each time I slid back and forth to each mode while out riding, it had saved each customization I had made, so I am assuming they will be saved for next ride too.
Adjusting the settings in just the two modes that I customized today was a lot of fun and had me thinking more than I had in a while about how the Onewheel was riding, which was a lot of fun.
I only usually ever hit about 16 to 18 mph max speed on my rides, so I never felt the haptic buzz while regularly riding around today. But I changed the mode to Bay mode for a couple minutes today in an attempt to hear and feel the haptic buzz a few times just to see what that was like. The buzz wasn't all that obnoxious like I thought it may be, but it did instantly get my attention. Back in Flow and Apex, I think I may have felt haptic buzz briefly a few times while quick stopping, if I'm not mistaken. But it seemed basically like nothing since stopping happens so fast. I live on a hill that I think, if I remember right, is about 15 percent slope (8 or 9 degrees on my phone app), and I did not get any haptic buzz while climbing, so I was happy about that. I am about 150lbs and climb it, I am guessing, at only about 5 to 7 mph max speed.
This is amazing! Great job!
I find it totally disrespectful that they only release firmware updates for GT and not for Pint X. I hope Future Motion is not discriminating against Pint X. I'm glad GT users get updates but those updates are needed by Pint X users as well. 😕👍
I mean, it'd be sweet to have for Pint X too but custom shaping was never an advertised feature for the Pints like it was for GT
Finally! So exited to test it out this weekend!
Wouldnt it be safer if all the boards had custom shaping? Why you guys hating on the other models?
Please - oh -please - let us have the ability to turn off Haptic Buzz. We just want the ability to turn it off and on - and having 1,000 miles minimum sounds good. Requiring being a ORL racer - that is a deceitful strategy that is duping people into accepting the upgrade. We thought we could turn it off. I like to turn it on during street rides, and turn it off when on Trail. Trail riding is the real issue - everytime I bonk a branch at 5mph - QUACK. Hit a few logs in a row -QUACK QUACK QUACK QUACK.
Whoah excited to try these out!
I can see why it took a while-they really care about giving the rider the best experience! Bravo-and thank you FM✨
Noice! …can’t wait to try it! Thanks!❤️👍
Today is a good day! Custom shaping + WTF rails gonna be superr shreddy~
Thanks for always keeping us RIDING and SMILING! 😎🤙🏻🔥
This is exciting! Will be a welcomed update!
You guys hit it out of the park with this update!
Threw the whole kitchen sink at ya
Cant wait to get off work and experience this!
VERY HAPPY! Thanks Kyle.
Updated properly, great job, finally!
Fricken amazing🎉
So in love❤
Thanks FM
Y'all rock
Amazing features!
We need for XR! Mission at slow and delirium at high would be awesome.
That is the best update thank you for that.
Thank you for this tutorial
It’s here! 🙌 If only i could get off work early to ride. Oh well, can’t wait to test it all out this weekend!
Perfect day to take a sick day ;)
About time! So excited!
this is rad! about to make flow even flowier
Thank you for finally releasing it!
Hope you like it!
It's not released yet is it?
@@mlastudioproductions Update was released today
@@sendy.santiago I'll have to reset my board to stock to test it out
@@sendy.santiago it doesn't update on my board
Awesome work FM!
Could the pint x get a bit of these features, or at least a bit of flexibility?😭😭😭
Buy the flagship model, get flagship features😉
@@logancouture4257 😭
I haven’t even played with the custom shaping, but I feel as though I have more power now after this update, and I am much more willing to push the board to its limit with the haptic feedback. This update is AWESOME! Thank you Onewheel!!
Double whammy my dude
When will custom shaping be coming to pint x?
Did the update, took roughly 15 minutes.
Just left the phone near the GT.
Make sure to update your app first, then connect to your GT and it will prompt for the firmware update.
Very cool that you start with what you like, in my case FLOW, and then Custom it from there. Easy to take back to default.
Because I have Lightning rails, just like there are those that have WTF, 357, etc YES you can lift the nose in each mode.
You can decide lift of the nose in a turn.
Yaw.
Roll.
How aggressive the acceleration and how fast you want to brake.
Lots and lots to play with.
Thank you FM for getting things figured out with the safety side, now I am looking forward to what you have coming now that this road block is down.
All the things people asked for like Posi pad, delays, lots of features that had to be done through hardware and software hacks, are now baked in.
Just had a short ride but already am thinking of little adjustments I will make to allow me to shape to my own liking and for different circumstances.
Want more acceleration in FLOW...easy.
Make it a little sloppier in APEX.
They listened.
Great way to learn the features is this video.
Easy to share custom shapes with others as well.
Enjoy the weekend.
Curious. I'm not getting the prompt. bugs? did they pull this already?
same. ...I turned it all off and back on again and everything. @@jimfondren393
LETS GOO its so good I barely got to try it and I already love it theres so much to do
Bought my GT this week, should arrive Tuesday. Replacing my 3 year old Pint, feels like I picked the perfect time to upgrade.
Indeed you did, I’ve got my self a pint x hopefully it gets it also
THANK YOU I LOVE YOU GUYS FINALLY
You guys did it al the way 🐐
Very cool, I'm looking forward to single pad activation! 🎉🎉
Stoked for it. And let us be clear, we did not come up with this idea. The community did.
@@Onewheellistening to the community is always good 🤙
Thanks for this update it just bricked my perfectly operational onewheel GT
I’ll be busy this October, hobbies are great! Yessah!
Incredible design
Much needed to keep up with the vesc boards! This is dope
I am an “older” skateboarder.
Have been skateboarding in my youth for 10-15 years straight. Was very good back then.
I still skateboard but not as often of course. Have been doing other things as well.
I am 44 years old now and have been onewheeling for more then 2 years and made more then 3 miles now on it.
I had a pint, xr and now I have a GT.
My point is, give FM some slack.
They have been trying hard to get this right and functional for everyone from the start.
Onewheeling is still new and it needs more time to develop!
I think that FM is making great things and I am looking foreward to the future of this new and exciting board sport!
For me, everything is great.
Whatever comes out from the onewheel community.
new brands, new sistems, whatever. All is good and needed for progression of onewheeling.
The sport and community are growing and developing.
It reminds me of early 90’s when skateboarding transitioned from vert and pool skating to street. It was very exciting time, full of inovations, new brands and new directions of skateboarding in general.
So, great work Future Motion!
Custom shaping is amazing!
And the buzz is of course needed for security and especially for the new riders. To keep everyone safe!
I am looking foreward to everything you will do next!Keep it coming!
Greetings from Croatia.. :)
Appreciate your comment!
Updated app, synched to board. Then nothing. No option to update firmware. Am I missing something? Thanks.
Thanks for everything you guys do! Now I need to hurry up and get off work. Ready to shred
Hey boss, I have an emergency at home. I need to leave early...
Wow, looks great nice work boys!
Thank you!
@@Onewheel any plan future for XR ?
Nice ❤ new stuff 👍
PLEASE BRING THIS TO THE PINT! LOOKS SO GOOD
If you have surestart pro does this affect the posi sensor on the custom shaping?
Fabulous, keep it up. Pint X next.
Custom Shaping 3.0 is our voices form around the WORLD finally being heard. THANK YOU FM.🥰
Bruh I modified the footpad to be a one zone footpad now I gotta take it out
I started the update, got through the video/slideshow about buzzes, still had to update, it froze in the 40% zone for 10+minutes, so I exited the app, shut the board, restarted everything. Now I've attempted the firmware update 4 more times alwasy getting to the end and it tells me it failed and to try again. THIS SUCKS, HELP ME PLEASE
This is on the same firmware update as safety buzz?
Incredible.
Im not getting the prompt to update in the app? I have everything connected and i have updated in the past? Not sure why im not seeing it?
will this firmware version come wave-style again? or will we be able to update at a later point?
like ik in the past i’ve missed an update and was stuck with an older firmware
Really excited to try it out, now how do I unbrick my board because the firmware failed 4 times in a row? It won't even attempt to update it anymore, just flashes white.
Can’t wait to get home!
Home is where you make it!
@@Onewheel and I got a performance treaded waiting at my front door :)
Trying to dial in my GT-S. Does the Roll setting still have and effect if you leave the Yaw Mix at zero?
How do u update? Says to not use phone
lets get it!!!!!
What happens if your board turns off automatically after going threw the 15:00 firmware thin behind that your seem to be in the middle of watching haptic buzz update videos an your board automatically turns off before the end of all the videos not completing the process properly and now your board is blinking blue and white lights like mines and it seems to be unresponsive. What are you post to do?
Thanks! Been waiting for this. So whats next? Cruise control to limit how fast the board can go regardless of how much you lean forward? 😂
How do I update? I don’t see anything different in my app. Does it just pop up?
AWESOME
Can you please release custom shaping for the pint x
Did @onewheel pull the update already? I've updated the app, but get no prompt re firmware upgrade connecting to my GT.
I love the new firmware and haptic buzz
NICE! 💪 🤙 🤙
What about the Pint X???
Let's go, the stoke is at a maximum! My board firmware is updating now!
Yew!
THANK YOU THANK YOU THANK YOU!!!!!!!!!!!!!!
YEEESSS YEEEESSS!!!
“We just finished pint and pint x custom shaping where we’ve made it to where you can change the aggressive. I’m really glad we’ve come this far” one wheel in about 2 months
still no custom shaping on Pintx though? Dang.
Updated my firmware and board without any problems. There is a lot to digest, but I feel it is safer for me when I get over 20 mph. I can see where this upgrade can make me ride faster AND safer. This adds value to my board. Thanks Future Motion, well done.