Good news! I noticed it over a year ago, I guess, but no one had reviewed it. Surprisingly, it seemed to remain unnoticed for so long. I thought it was just another SI4732-based receiver with no benefits over the ATS-25 or ARESQ AQ1 (even worse-no SSB promised, no firmware customisation option). But let's see how it performs... It's relatively quiet when there is no signal, which is good in my opinion (a somewhat analog feeling to it). However, having no control over AGC and soft mute means it mutes too much while being tuned at a 1k step. During FM manual tuning, there's almost no audible muting, which is nice. *5:12 - Brother Stair is my favourite testing signal , another one is RNZ. **Hard house intro - 👏
Good news! I noticed it over a year ago, I guess, but no one had reviewed it. Surprisingly, it seemed to remain unnoticed for so long. I thought it was just another SI4732-based receiver with no benefits over the ATS-25 or ARESQ AQ1 (even worse-no SSB promised, no firmware customisation option). But let's see how it performs... It's relatively quiet when there is no signal, which is good in my opinion (a somewhat analog feeling to it). However, having no control over AGC and soft mute means it mutes too much while being tuned at a 1k step. During FM manual tuning, there's almost no audible muting, which is nice. *5:12 - Brother Stair is my favourite testing signal , another one is RNZ. **Hard house intro - 👏
very nice which antenna do you have connected to your receiver?
For this test I used a 80/40m trap dipole
You might try holding in one of the mode buttons for a few seconds to see if it may go into SSB.
Tried that- it doesn't work!
А где SSB, на задней крышке вроде написано или она от атс-20.
No SSB I don't know why it says SSB on the radio