AddForceCut - New grooving and parting-off tool series with optimally rigid self-clamping system
Vložit
- čas přidán 6. 10. 2021
- Highly rigid self-clamping system improves productivity for deep grooving and parting-off operations.
Unique, high rigidity self-clamping system.
↓Please visit our website for details↓
tungaloy.com/product/grooving...
#Tungaloy
#Grooving
#Partingoff
#CNC
#TungFeedBlade
#4K - Věda a technologie
Looks good. I just learned this week about 'Y-axis parting' by one of your competitors,, which is very interesting. Giving me some new ideas.
Thank you for your comment!
If you have any problems with processing, let us support you!
THE best grooving and parting-off product in the market
0.4 mm per rev? 😲 😱 Nice 😁
very good tools
Aí sim hein se você tiver um torno serado de folgas principalmente no carro longitudinal eis que aí um grande suporte de trocas ferramentas para corte e sangramento show 🙏
_No one saw this parting tool coming._ 😮
_Now we have only ourselves to blame._ 😔
I Love your Tools #DuplexCNC
@Duplex CNC ACADEMY
Thank you for liking our products. Please keep visiting our Tungaloy channel!
Красота
Благодаря за коментара!
I will try talking my boss into one of these .. using another 3mm tool now that feels like it belongs in 2005. It can't even get close to these feedrates without turning the insert to dust, and killing the holder.. 0,1 mm/rev is max in very soft steel or aluminum.... often i default it to 0,06 and browse the internet while the part finish.. 😅
Thank you for your comment.
This tool is grooving and parting-off tool series with optimally rigid self-clamping system
Highly rigid self-clamping system improves productivity for deep grooving and parting-off operations.
@@TungaloyCorporation can it be used for sideways finishing cuts in wider grooves with good surface finish or will it deflect and cause chatter ? :)
@@mattiasarvidsson8522blade type holders always deflect , even the deep grooving holders . I have yet to a find a grooving tool that won't deflect . But it should not vibrate if the insert and parameters are correct
That Simply means ! Your Weekly Salery , is Deducted ! Until further ! Notice !
Next improvement will be coolant from underneath the insert.
The Iscar blade with the TAG insert has coolant underneath the insert.
They have a through coolant blade, it's pretty awesome I'm running it in my Naks right now.
...📡 É x e l e n t e !
Thank you for your good comment!
How much maximum dia can be able to parting?
Copying the Iscar blade now? And why not it is a great idea.
They are the same company family
which code are you using? G97 or G96 ?
Can’t u hear the spindle ramping up ?
あははははははw
おいおい...メーカー動画にしては色々突っ込みどころありすぎw
@しろくまさん【秘密工場】
動画ご覧いただきありがとうございます。 ご参考までに伺いたいのですが、突っ込みどころというのはどういった部分でしょうか？
是非、今後の動画制作のアドバイスとしてお聞かせ頂ければ幸いです。よろしくお願いいたします。
私も『色々突っ込みどころ』がわからないので教えて下さい。
条件が高すぎるとか？？？？
私も聞きたいです。
他社メーカーとの比較動画の工具の突き出し量(ブレードとベースブロック共)の差に違和感を感じました。
The music(noise) makes it unwatchable
More stable machining is possible by cutting the tool overhang in half and controlling the conditions.
We would appreciate it if you could take a look at this time as a demo.
取り付けボルトが刃物より出っ張らないようにして欲しい。
大変、大変貴重なご意見ありがとうございます。
実際に取り付けを行い、出っ張りが悪さをしたということでしょうか？
@@TungaloyCorporation
なるべくビビリが出ないように生爪ギリギリで突っ切りしたい時はかなり生爪を削って当たらないように逃さないといけないので、可能ならば当たらないようにして欲しいです。
@@user-ep3jr3on9p大変貴重なアドバイスありがとうございます！製品担当者へ共有させていただきます。
こういったご意見が他にもございましたらぜひお知らせください。今後ともよろしくお願いいたします。
@@TungaloyCorporation Chamfered holes and chamfered bolts that sits flush with the tool will do the trick. I doubt that it will change rigidity.
@@haavard1989 Thank you for your comment!
So today I called Tungaloy in USA IL and trying to get some help for how much their tools and inserts cost and they don't even know their part numbers from a flip book catalog they Make visible on the web site ! I was given a phone number for their area sales rep and I called only to have to leave a message on a cell phone!? terrible one can not get anything done here!!!! Bad business model from Tungaloy!!!