Video není dostupné.
Omlouváme se.
How to Paint your Exhaust
Vložit
- čas přidán 27. 09. 2013
- Learn how to properly paint your exhaust. It is very easy to do. Painting your mufflers, catalytic converters, exhaust manifolds, and the rest of the exhaust will protect it from rusting and make it look nicer. A painted exhaust will add value to your vehicle and let the exhaust last the life of your car! All you need to do is sand the exhaust, clean it off, spray the paint in even coats, recoat after 30min, and then let cure
Products Used:
High Temp Spray Paint: amzn.to/2tzAZ7A
100-Grit Sandpaper: amzn.to/2vbtGn6
Shop Towels: amzn.to/3bosCNw
Spray Bottle: amzn.to/2UxGzmb
Isopropyl Alcohol: amzn.to/2w0NwSz
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-As an Amazon Associate I earn from qualifying purchases.
-Website: www.ChrisFixed...
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: www.youtube.com...
-CZcams Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
This is the first time he says "hey guys, Chris fix here.
he says hey guys it's chris fix AGAIN ...
A legend is born.
Wow I was looking for the same too. Yeah I am that bored tonight.
Went from ‘Today we are gonna...” to “hey today we are gonna...” to “hey guys Chris fix here”.
TriangleThesis he didn’t say it
its funny how you take your time to give us great information and yet so many people are talking about how you say water instead of saying thank you. well, thanks chris, your videos are awesome
+Monkey D. Luffy i actually like the way he says it its quite relaxing for some reason
+Monkey D. Luffy Cause he says it just like in Idiocracy....
He's prolly southern, we say it like that.
+Johnny McKinney no southerners don't they say it like a wa-ter he says it like worter
+Johnny McKinney wor-ter
Chris, I hope by some random chance u see 👀 this comment and come back to this video. The reason why i want u to see it is because this is the FIRST car repair/modification video that u called urself CHRISFIX!!! 9 years aho was the beginning of an era that is STILL going strong as hell right now because of YOU. Thank u sir!!!
She’s that’s crazy! What a difference in video quality eh? Haha
BRoo chris look at how far you came - congrats man keep going
Right?! Thanks a lot.
@@chrisfix no problem
the 8 year difference in his voice, thank you for being an inspiration
Haha, yea, gotta have tough skin on youtube. I would love to know why a thumbs down...
💀💀
Idk man
Your vids all good tho
Because haters
from 2k19
Who knows.
I'd wonder why it came out light, and it was a good to watch video, should have extended a little. I like how you skipped some.
When it was time for a whole new exhaust system on my car, I painted all the new parts before putting them on and it is amazing how well the paint holds up after several years. I live in the salt belt and I definitely recommend doing this to any exhaust component installed in a car.
I had new exhaust put on my '94 Toyota pick today and was wondering if good idea to paint while it's still new ?
Ahmed how did it hold up and did you use the rust-oleum high heat primer as well? Since those parts were new, did you sand first? I ask because I'm not seeing sanding or blasting as a requirement in the high heat rust-oleum primer/paint instructions. Thanks!
Incredible how chris was there even after 3 year, that show us how much he wants us to actually understand something🤯
The first ,, hey guys Chrisfix here" video
I've been looking for it for ages
The beginning of *HEY GUYS ITS CHRIS FIX HERE*
*OMG ChrisFix liked my comment Thanks dear and god bless you I am a subscriber from long ago*
A quick question Chris. One day i was driving and suddenly when i shift into 5 gear, it gave a cranking noise and the shifted pulled right back to N. it was night time so i took the risk and continued on as i was driving in the middle of journey of about 200 KMs. It was nighttime and no shops were open. Then after some time the 3rd and 1st started acting same.
I reached my destination and next day I woke up i rushed to a mechanic. He said that the gearbox's gear have worn out, or broken. Offered me to change the gear 1,3,5 and Hub Sleeve. And the parts and labour is coming around 15k (INR which is not a huge amount but not less too)
So i am asking you. Is the mechanic telling me the truth or not. Mech said that setting up those gears from the gbox is a huge pain and time consuming and the entire repair will take 2 days.
My ride is a (India) Tata Indigo CS, 2008 model, done 104000 KMs, Diesel TDI, 5 Speed Manual.
Thanks.
@@jemsncrystals synchros
He says Hey guys ChrisFix AGAIN
jemsncrystals @chrisfix please respond
I used this method just as Chris describes in this vid. It works great! I used the exact same brand of high temp paint. I bought a few cans and sprayed all of my wheel wells and a lot of the underside of my truck. I am sure the final color will vary depending on the amount of rust, etc., etc. My final color turned out to be a "dark" gun metal gray...which I like. Bottom line....follow the instructions from Chris (keeping in mind results may vary) and you won't be disappointed! Thanks AGAIN Chris!!!
Thanks a lot man and thanks for sharing!!!
@chrisfix I'm new to painting would it be easier to use brush on and how many cans would cover exhaust on 2012 f150
Where it all started
This must be one of his first videos
It's awesome to see how far this man has came
Thanks for sharing brother
You are always my go to
Imagine watching your neighbor rubbing and jerking his car exhaust 😂😂😂
Hahaha
Wow, going from modern ChrisFix videos to this is brilliant. Dude, you've come a LONG way. Not that there is anything at all wrong with this.
This is a great DIY video. But now you're a proper, fully fledged CZcams star
Replacing a rusty exhaust pipe with a new one on my corolla. Thought about painting it to make it last longer and boom, Chris Fix was there to help me. Thank you !
dude you def need to make a whole video how "how to paint exhaust from headers to tail pipe" !
So 4 years later.. still my favorite diy guy...
So how about 7 years later?
Chris I have learned and gained confident fixing my own cars by watching your videos and following your instructions and advices thank you endlessly
That is awesome! Glad the videos are helpful!
I love how he was confused when he did a good job like he was expecting to fail!!! 😂😂😂😂😂🤣🤣🤣🤣
Crazy how not only is this the first instance of "hey guys chrisfix here" but this man is still liking comments on 8 year old videos
Haha I do my best to answer 4hrs of comments every day so I can help people.
I love all your videos! I'm not a car owner yet, but you give so much great information, that I feel confident that I'll be able to take care of and buy a great car, thanks to you, Chris! So, once again, I say thank you!
Yo, for fun I watch his old videos......you have come a far way Mr. Fix ( and these videos saved me thousands, and given me many rewarding smiles of accomplishment) - thanks a million!!
Man what a long journey....you went from being Morty to Rick .....much love dude!
OK, I had to pause the video and take a deep breath. No blue gloves? No "Chris Fix here!" intro? I didn't know such videos existed!
_Edit: not "soapy wooder"? Man, I feel...I don't know._
Prehistoric ChrisFix right here :p
Here i am just searching how to paint my muffler and i find one of Chris Fix's oldest videos. Very nice.
I wanna say thank you very much for this I didn’t really know the best way to get the crap that rubs off it after sanding off but you made it look easy thank you
Thanks for the reply, I did mine exactly like your vid, it's been about a month and looks great, worst case scenario it's easy enough to do a second coat if it starts to fade or chip. Keep up the vids, well done man.
VERY FIRST CHRIS FIX INTRO LETTTSSS GOOOO
Your old videos compared to your new ones are awesome! You have grown and improved the quality and your level of excitement is way better in the new ones!! Keep up the awesome work brother! Gotta get me some soapy wooder stickers!
Awww first time saying Chris fix 😂😂😂 yayayay and June 2019 anyone???
Jack Surette August
Chris fix AGAIN bro
iTz PrO yea
Same
You have thee best video explanations. You go into everything on what to do and what not to. And you show everything's step by step on cam if possible. Thank you so much Chris
KatsuroRawr(≧∇≦) Thanks and no problem! Glad the video was helpful!
A suggestion; for painting pipes located after the catylitic converter, then paint rated at 500f is quite suitable. Exhaust pipe temperatures reach between 300f and 500f. Therefore Bigger is not always better! I use KBS rust seal for my exhaust pipes - excellent result. Use for pipes after the catylitic converter.
So Im still watching all your videos Chris for the past 3 weeks now! Ive done many of your repairs on one of my cars and they are working just great! I find it funny how you dont sound very enthusiastic on older videos compared to your newer videos :) Cheers!
***** Thanks a lot man! Haha, that is interesting/funny!
This is a great video. one thing to note. Exhaust generally rust from the inside out. due to condensation build up everytime you shut the car off. make sure when you are spray painting the outside that you don't clog up the weep holes that allow your muffler and resonator to drain.
Where would the weep holes be?
1:38 that move right there gave me goosebumps
Love how he sounded depressed or not nearly as happy here but now he sounds a lot more excited.
I love your vids Chris always informative and gives me a lot of ideas, and the way you say water is funny as hell lol keep up the good work dude!
Would love to see the final product after the 'baking' cycles. Love your video series BTW.
Chris then: “hey guys it’s Chris again”
Chris now “ HEY GUYS CHRISFIX HERE, AND TODAY…”
Chris: rubbing alcohol is only 65% isopropyl alcohol. The rest is plain old water and sometimes added glycerol for skin lubrication. Best to buy the 99% isopropyl bottle. That's what I use.
Hey Chris, love your channel, great videos! My one comment about your process in this video is that sanding off the rust will also remove any factory applied galvanized coating. I have found great results with using phosphoric acid to remove the rust, gets into all the rust pits but won't strip paint or other coatings or eat the good steel.
SuperflyDriver Thanks and thanks for the tip!!!
It's white to me ...
ITS LIGHT GRAY + WHITE + MOR'E WHITE, SO DUDE U CALL
IT BLACK?
BATTERY GONNA DIE OF MINE
He just needs to put some lotion on it.
It's the black and gold dress all over again
This was the first ChrisFix video i ever watched, and after that i have always watched him since then.
2:11 chris fix is so good that even girls can learn something from his videos;)
Chris: _"Hey guys, it Chris Fix again"_
Me: **dies inside** _"Almost"_
I'm from New Jersey and his way of saying water is fine to me haha.
Honestly I have no need to paint my exhaust as I have a full stainless system but I'm running out of ChrisFix videos to watch.. I can't get enough! Have learnt so many tips and tricks along the way.. Thanks Chris!
Not sure why this old video was recommended to me.... nor why I watched it twice in a row. Hahaha. =D. Now I feel the need to paint my exhaust. Hahahh. Great video =)
Sprays on black turns grey when it's done! - Billy mays
Ronaldo Valdovinos lol, it turns black once it is baked on.
*ChrisFix the NoGloves™ era* 🔥
Thank you Chris for the tip why one has to choose the High heat paint. But it would be nice if metallic aluminum or metallic silver is available for high heat applications like this.
Lol your voice expression compared to your new and Newer videos I can say you’ve really improved👍🏻
His tutorials have gotten better
in watching this in 2017 and im suprised by the progress youve made ! keep up the great vids bro :) thanks a lot for all the help
i really prefer the old chris calm talk, than the hiper talk
Bro, you have every video I need. You're a G.
Aww your first "hey guys, Chris fix " lol
Thanks so much!! Can’t find the video of painting the door panels😢 doing that next lol thanks for the video!!
No gloves, no intro, almost no accent. It's fascinating to watch your evolution.
Hello guys, this is ChrisFix here
The first of everything. Love you Chris and thank you for all your videos !
Regard from a very big fan in Malaysia ✌✌
Chris your videos are the best
Thanks!
His first hey guys Chris fix here!
I Love ALL OF HIS VIDS !!!!!!!
this is the first hey guys !!!! chrisFix here will come later
First «Hey guys, chris fix here» 😍😍
first vid he said his name in the intro
Looks great, I think I will do this to my new exhaust, the only difference is I think I'll use a high temp primer coat to go with the high temp paint.
Very informative . I dont understand how the black color became white after drying..
i dont think he is sick. that strange voiice is just because Chris truly hates rust and dirt and so he feels uncomfortable among rusty automobile parts. :( anyway,Chris if you re reading this,thanks for all the cool videos!! Greatings from Hungary
Such a classic, use a rust inhibitor like Jenolite first, then paint!
Thank you. I will do this next weekend. Very informative even including the humidity factor. :)
long,long ago an old man (I'm 67 yrs old) told me to drill a 1/8th inch hole in the lowest part of your exhaust system...he said condensation is why most exhausts rot and that little hole will make it really last
The first time he said, “Hey guys, ChrisFix here” and little did he know he would be doing hundreds of those over the years
Man you a brand now ! How far you came ! Inspiring!
*ChrisFix "How to Paint your Exhaust
1. You Don't
Also note Chris if you read this you the type of car guy youtuber that deserves a supercar, much respect unlike all the other stupid vlog channel youtubers who just upload their supercar and drive around and consider themselfs beneficial to the car world
He said it! He said it!
So this is the video that introduced us to "Hey guy, ChrisFix here!" ?
Pretty much your catchphrase at this point.
It was!
Thanks bro. Just did it and look great
Nice work!
You can tell he's cot so much more confident in what he sayed in these old videos he's really thinking about what he's saying now he's fluent and enthusiastic lol
I found the first Hey guys chris fix here ideo woo!
crazy the difference here to in 2013 to prez day 2017!! still great though chris!!!
Is there away you can make a video on how to install a muffler? That would really helpful?
Yes stay tuned!
AWESOME! You replied! Thanks I cant wait.
hey man it would be really nice if you post a video of how did the coat stand after like some months. thx anyway
Santino Vaccariello. Dont forget to replace the muffler bearings
simple to follow too. great video as always
Intro Evolution:
2010: today we are gonna...
2011: hey guys
2013: hey guys it's chrisfix again
Late 2013: hey guys it's chrisfix here
2021: HEYYY GUYS IT'S CRHISFIX HEREE
Hey found it!!! First time you used Chris Fix!!! WAYYYY COOLLLLL..😎😎
How has this held up since you painted it? Thank you for the video!
i think the paint will chip off..
I use a wire wheel on a grinder to get all the rust off my roters and calipers haha and cleaned them with petrol then painted them black, they look really good!
+Alistair Mcgown Awesome!
Do that strut replacement video! haha
Question: does the high temp spray paint insulate heat creating more heat?
A layer of paint is not going to insulate much heat at all. That’s like painting a shed and saying it would insulate it. Paints thins
I use Heater Paint , there are some special colors like silver metalic and so on.
That looks really nice.
Or stuff called "Hammerschlag Lack" produced by Hammerite.
I dont know if its available in the USA aswell, but you can use it basically without prework on the exhaust pipe and it also prevents rust and is temperature resistent.
when you see ur first vid that chrisfix made and realize youve subbed for a long time (i think lol)
First ever “ hey guys Chrisfix”
Thank you so much my exhaust is one of the terrible cosmetic things on my truck
Did I miss something in the video? Why is the pipe very light grey instead of black ?
Cool. Im so glad i subscribed to your channel. You've taught me so much.
***** Awesome man! I am glad as well! It is great you are learning so much!
Almost 3 years later, in your opinion would you say this method actually helped, would you still recommend this technique?
Good tip/great ideas w/ the water rinse & alcohol prep, I'll probably use that in the future. I'm assuming hand sanitizer would work about the same as the thin alcohol, what do you think? Take care from Tn.
Brilliant Chris!!!
nice video, going to go paint my flowmaster exhaust chrome tip this afternoon on my avalanche! thanks!!
GREAT! Let me know how it comes out!
Chris, I know this video is pretty old, I'm just wondering if you still have the vehicle and how to paint held up and preventing rust. I recently bought a vehicle from the north and live in the south and I'm doing this same technique. I'm also wondering if primer is necessary or if just the straight paint works as a preventative measure for rust. Love your videos thank you man!
and both years later he has almost 1.5 million subscribers way to go Chris fix