Video není dostupné.
Omlouváme se.
New improved AIR INTAKE installed on 2012+ Mercedes-Benz W204 C250
Vložit
- čas přidán 23. 03. 2020
- I discussed my past air intakes installed on my 2012 Mercedes-Benz C250 Coupe and I show how to install my new improved air intake kit from tornado tuning.
DISCLAIMER: This video was sponsored by Tornado Tuning. All views and opinions expressed in this video are of my own.
Where to buy:
www.c250tune.co...
Need more info...please contact Tornado Tuning:
TORNADO TUNING
NARESH VIRKAR
WhatsApp: +85292106377 (preferred contact method)
Email: Newtongsm@gmail.com
Facebook:TornadoTuningInternational
Music Credit
CZcams - "Palmtrees"
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
MY MAN "FLEXX" BE DOIN HIS MERCEDES RIGHT GUD LOOKS ON SHOWING US MERCEDES OWNERS HOW TO MOD EM UP👍🏿
That thumbnail.... glad to see the black beauty again. Great video!🔥🔥🤤🤤🤤
I Love your video's. Love to Americans in these Difficult times and keep safe.❤️🇬🇧
Good job Flexx,
I have been watching your videos since day one, and I never comment on videos, but I must say this paired with Naresh's aluminum intake piping is a huge improvement on low end TQ!
A lot of his mods are great for enhancing everyday driving. They’re not designed to make tons of power that will put the engine in jeopardy. And I keep telling people that who keep asking me how much hp I make when it’s not a about that, it’s about improved drivability. At the end of the day, it’s a c250...if people are concerned about Hp, you my friend are driving the wrong car. Hahaha
Keep it up Flex, and stay safe!
back hole was mad annoying to get aligned. i had to kind of bend that back tab, then use the grips like in the video to get the screw started until i was able to use an actual screwdriver to finish it up. it sounds great and i should’ve done it years ago
yeah...it's aftermarket so it's never gonna be perfect like OEM but we tuners find ways to make it work. Yeah, I loved it. Glad I have a similar setup on my W205 now.
Damn that do be sounding fire doe
would be cool to see some driving footages of this c-class
We say in Germany
K&N
Love the video bro
Great video boss. Does it add any hp? Does the check engine light come on? Does it affect anything when you smog the car i am in California thanks very much.
Hey Flexx, I am obsessed with the ECU tuning mods you have done, but have you ever considered Carly diagnostic and tuner? Legit Street Cars uses them and shows all the million features you can modify and unlock within your entire car.
I used Carly. It doesn’t unlock features if your car doesn’t have features to unlock.
Flexx Alexander I saw on LSC where he was doing a US Spec Alpina B7 BMW and he could choose all kinds of Euro only settings such as headlight sequences, turning off the regulators, different home screen settings, different interior lighting options, etc. I just didn’t know if W204s have those same options that could be unlocked. Also, have you ever tried to use your tune setup as launch control?
Waiting for w205 headlights video🔥❤️
Would this fit a C350??
you should do air intake on the new mercedes next!
dont worry...I have tons of mods coming for it
Hi, I have a C180 2009 modified to stage one. I was told to prepare it for stage two, I have to change the air intake system and the intercooler. How do I know what intercooler is bigger than the one currently in my car? Would I go for a different C Class? As in if I went for a C300 would that mean my car would have a bigger intercooler?
@Flexx Alexander big fan of the channel man your the W204 GOAT. Question, I noticed you replaced the cheap hosing leading to the intake with aftermarket hosing that looks much nicer. Do you remember where you got that hosing? Didn't look like you had any videos for that
czcams.com/video/5VBDfKqwg9A/video.html
Hi flex. Do you know if tornado tuning will be making anything like this for the w204 c63? Cool vid.
Nice! 👍
Great video ! Thanks !
I had the BMS intake but the car would run poorly after driving around. I took it right off. Will this be the same?
I've never had an issue with BMS when it came to performance...but I heard alot of people had check engine light issues, vibration issues, and poor performance cause of heat soak. Which could be just related to the combo of that intake with your specific car? I can tell you I have zero issues with the tornado intake...but again, my car isn't sensitive like some other C250 cars when it comes to mods.
Kenny Nguyen m274 and m271 total different nothing is same including the gear box
Hello) I've read that those type of filter actually have too much oil in them getting out from the factory which can lead to oil intake in to the system
Not really. It’s depends. Some are over oiled from the manufacturers or over oiled by the user when they go to recharge it. This one from tornado tuning is fine. Zero issues whatsoever.
Nice, been waiting for this one, aren't you also doing a muffler delete? I'm really interested in that one! Want to hear the difference in sound
Turbo muffler delete or actually exhaust muffler delete? Cause I already did a turbo muffler delete years ago and I will never do an exhaust muffler delete. That’s straight up trash.
@@TheFlexxGarage Exhaust muffler delete. I thought you said you had one in the works, I guess not now haha. Well I look forward to anymore w204 content you have in the works
nahh..not me. Ive always been against an exhaust muffler delete. Its too loud, it's illegal in most states, and it causing alot of droning inside the car. I've been doing some research for the W205..but it will be tough. It's not like my c250 where I can delete the resonator and 2nd cat and install a muffler. The w205 easily picks up drone if you delete the resonator. So I don't know yet. The w205 will be challenging to get a nice exhaust note without just doing the muffler delete (with it's negative side effects).
@@TheFlexxGarage Ah, understandable. Thanks for all your content man really appreciate what you do!
How long did it take for you to get your blow off cable from turbo tuning? I ordered the same one off the link in the video and it’s been over a month and still pending shipping
hey i just ordered mine today. did u ever receive yours and if you did how long did it take?
Sounds good man! What's the link?
Hey flex ! Now that you got this one with a cover how often do you clean it ?
Hey, flex how many miles does this beauty have? Cause i also have a ‘12 c250 coupe with about 110,000 :)
Merci 💛!
Flexx, I know this is off topic in regards to this video, but what is your opinion of straight piping a W204 coupe? As always, really love your content!
Go read my reply to the user “GNIUS” comment under this video.
Mike L do you have a C250,300 or 350 ? I know if you straight pipe a 300 or 350 they sound very good
Mike L now all new direct injection car have smaller turbos they require some small back pressure a straigh pipe will loose all torque on lower end so this solution is useless can use a 300 cell down pipe
Good, flexx vidéo w205 😉😉😉😉😉😉
Hey flex do you still have this setup? And not using? I really want to buy but the price on the website is a lot, wanted to see if you would sell it to me, great videos bro I’ve done a lot of your mods, I have the exact same car
What's more worth it?
Turbo muffler or diverter valve
Personally, Diverter valve. It Reduces backwards turbo spooling as where turbo muffler is a little more for sound.
dv for sure. I installed mine and noticeably better top end and keeping boost
Do you know if the aluminium cover comes separately and if it will fit the Bms air filter?
It’s a kit. It was not designed to work with other branded products.
Hey flex I was gonna get this but I saw there was two variations of this there is one that is for the CLA a and b class that is 1.6-2.0 liter and there is one which is just is just for the 1.8 liter but it doesn’t say if it’s for any model so I’m kinda confused on that?
You need to message tornado tuning and ask. I won’t know.
Might seem like a dumb question but do the tornado tuning charge and intake piped also fit with the cold air intake or are they only made for the stock air box
i believe he had the intake and charge pipes fitted so I’m sure it will work, if it worked with stock it should work.
I have a 2013 c250 1.8L don’t believe these are turbo. Would you recommend this or just a higher quality filter?
US spec c250 are all turbo like my car.
@@TheFlexxGarage thank you, placing an order here soon
I’ve been trying to find a solution to my problem bc the previous owner got rid of the oem filter box and this seems to be the perfect fix but do you think the price makes it worth it seems like it’s a bit high priced don’t you think?
It’s not even high priced when you compare it to others without a cover. It’s worth it.
Price is very cheap less than 120 usd rest is shipping money price is included of shipping
Can someone explain what this filter exactly dose to the car ?
Adds a little more hp to the car given its an open air intake. It also improves sound A LOT making it sound more aggressive. I’ve personally added an open air intake to my c250 and it sounds great 👍🏼
Fabian Chavez thanks bro !
@@fabianchavez531 what intake. U use ?
Hey flexx when you had your bms intake in did you feel a jerk between shifting gears
Nope. Only issue was the filter got dirty really quick and on hot days, the car felt a tad sluggish...which could be because the filter was experiencing heat soak. It’s not covered so it’s just sucking in a lot of engine heat.
That’s why I preferred the tornado tuning one. It is an open filter style and has a heat resistant cover. So I get sound, performance, and it won’t suck in hot air or get dirty quick.
Do you have suggestions for black paint. Waxing products etc
Not really. It’s all in the way you wash your car. Long passes with a soapy mitt. Don’t do circles or you’ll cause surface scratches and swirl marks. And those things make black pain look like crap regardless what wax or coating you put on. I wash my car, thoroughly dry and in the shade, I use some turtle wax ice spray. I think they have a version for black paint too. Where the spray liquid is black and it helps conceal light scratches and swirl marks.
Thank you! I have the same coupe in black. I have no emblems and I love my car. Maybe I can have it played and waxed to help the black paint.
Can I use this item for my w204 220 cdi?
Yea wish I seen this video first instead of the other one already bought the other one 😭 is there a cover u know of for the k and n?😂
Nahh. There isn’t unless you custom make one
What kind of oil leak had because I have a oil problem with my 250 that been trying figure out?
Banjo bolt to the turbo. It’s common in c250.
@@TheFlexxGarage Okay, Preciate it💯👍🏽
Hi Flex, did adding the cover work? I have seen some othe ryoutubers say that on other products with a heat cover it works to an extent but hot air from the engine still comes through ... what was your experience like?
Well. Define “works”? Cause this is the lesser of 2 evils. The first intake I had was completely exposed. So it will definitely draw in hot air. This one with the shield definitely helps but it’s not gonna block out 100% hot air. Also, even the oem air box (that’s completely sealed) will still take in hot air cause plastic absorbs heat really well.
That’s why for an intake, you just need to pick your poison. It’s not really designed for noticeable performance increases when installed alone. It’s meant to work with a more modified engine that has silicone turbo charge pipes and a bigger Intercooler to cool that air coming in from the intake. With other mods, doesn’t matter if the air through the intake is cold or semi hot, the other parts will make it colder before it hits the intake manifold.
@@TheFlexxGarage Ah okay I get you. I was intending to install a customer intercooler anyway and then a hybrid turbo down the line (don't know if that helps though) by works, for me it would mean is it worth just putting in a K&N air filter like you had before as opposed to getting a heat protected intake system. Tbh I spoke to Turbo Tuning, they were very nice and responsive but are saying due to covid they can't do anything for deisels at the moment so I have found K&N heat protected intake... not sure what is better
Thanks for the reply though, great advice 👍
If I were you, don’t go with an “open style intake” unless it has a cover. Just stick with the oem air box and just drop in a performance air filter.
Hey Flex,
Will it fit with c200 2011 ? Do i need any other mods or adjustment to install this ?
Not sure. We don’t have c200 here in the US. You need to ask tornado tuning.
Hey.. I guess the link to the product doesn't work. Can you tell when can I get it now?
As mentioned in the video, contact tornado tuning.
Do you have a link for this air intake with the heat shield
As mentioned in the video, look in the video description. There’s no link. You need to contact tornado tuning.
Hey flexx do you know if c63 v8s could fit into the 4cyl 1.8L T sedan c250s?
DreamCrewOFFICIAL I wondered the same because there the same body if you did put that engine in the 250 you would need a new transmission
Or you can take the c350 v6 and put that in the c250
You may be better off just buying a w204 C63. the V8 is a bigger engine and *probably* needs more space than what's in the C250 bay? You should also research into all of the other parts to make sure they are the same spec. You don't want to overstress the stock parts built for a 200hp car by throwing a 500hp engine onto the drive shaft. Also, you'll have to do a lot of other electronics updates, ECU tune, etc.
Honestly not sure, but just from my BS sounds like more work than you probably want but research into it if you're curious! Reply back if you find that it's possible and i'd do it to my C250 too LOL
Can I do this on a 2003 e500?
is there another way to buy ? i try to order one but whenever i do my bank stops it from happening they even canceled my card because they thought my card has been exposed but i called and told them but i still cant order it
why won't you just contact tornado tuning directly? all their info is in my video description. That's the easiest way to buy.
Hi alex,
Love your content, you’ve really helped me out a lot with my w204 mods.
I just have a quick question: for some reason the ‘coffee mug’ thats for attention assist never comes on for me. Ive tried turning it on and off 10 times but nothing. I called Mercedes they said you need to bring it in for us to do a diagnostic which will cost £50/60. Is there anyway i can resolve this issue myself without having to take it to Mercedes? The car has no issues at all, every single sensor works too.
My car is a c 220 cdi coupe w204 2014 - i live in the uk btw
Appreciate the help.
The attention assist won’t turn on unless your vehicles detects you driving like you’re tired
I bought it and I'm having trouble aligning the hole in the back. Did you run into anything similar?
Nope. What you see in the video is the install for my car. You need to check with Tornado Tuning if you have issues.
I’m having the same problem if u have a fix please let me know
super annoying but i just had to bend that back tab a little bit to get it to align. then used the grips like flex to get the screw started till i could use a screwdriver to finish. definitely sounds great, should’ve done it a long time ago
Would you ever want to own a W221 S550?
no
waiting on w205 engine enhancement content :)
coming soon
Flexx Alexander i’ll look forward to it! 😊
We have many product for w205
www.c250tune.com/w205-parts/
Will i get the wushhhhh sound with stock blowoff?
No, i recommend going with a GFB VTA t9458. I’ve got one and it runs great, and it is also what he is running in this video.
Some but not a lot.
Hey flex would the Tornado Tuning Triple Combo Pack work on my 2012 c250 it’s a v4 but I see on the Descriptions on the website it says it’s for a v6 does it matter ?
Naresh from tornado tuning would know
Flexx Alexander is your car a 4 cylinder too ? I thought I saw that in your video when you were putting on the quad tips with the turbo magnaflow ?
All 2012-2014 C250 are turbo 4 cylinders. Only the C300 and C350 are 6 cylinder.
Flexx Alexander thats Exactly what I have a turbo four-cylinder so have you put this mods on your c250 cause if it worked for you it should work for me too
Hey flex thinking of getting this intake but how long does it take before u have to clean it again?
Depends on how much you drive the car and if you are in a dusty area. I usually clean mine once a year after spring (so I can get rid of dust and pollen)
@@TheFlexxGarage ok thanks bro preciate it 🙏
@@TheFlexxGarage also if i have a stock c250 engine would u reccomend this as the first mod or would the heat soak be too much of a problem and should i keep the oem
There’s no heat soak. There’s a heat resistant cover for a reason. It’s a great first mod.
@@TheFlexxGarage ok bet thanks bro i appreciate the tutorials u make i’ll lyk how it goes👍
I want to get this, one question, does it suck in heat like the K&N cold intake?
I already mentioned in the video that this intake has a heat resistant cover and that’s the benefit over an open style intake.
@@TheFlexxGarage I checked out the site and it says page not found, guessing they are out of stock. Any other ones you recommend?
Message them instead.
Are these cars reliable? I want to buy a 2013 or 14
Yes I bought a 2013 c350 last year And I haven’t had a single issue. Just had to buy a new battery and a new set of tires!
Vajover I am eyeing one by the end of the year!
Who’s car is that Flexx?
Haha. Did you not watch the video. Literally 5 seconds into the video I said I was in my car.
Will this fit a c180 w204 2012
Thanks
isnt the 180 a compressor? then it doesn’t bc the 250 is a turbo..
Yea i got it fitted with in the original box
How much hp was your C250 making?
Not sure. Never got it dyno. All I know is that my car was definitely more responsive and pulls harder. On top of that, my engine components will last a long time since they’ve all been upgraded from the cheap oem plastic pieces.
yeah the plastic bits are kinda annoying. Do you know what the 0-100km/h was? Or 0-62mph for you guys i think@@TheFlexxGarage
Do we have to oil this filter?
No
@@TheFlexxGarage thanks bro preciate it im workin on my car rn lol
Nice 😎💪🏽
The cover does not sit flush, and I never received the screws that should’ve came with it.
Yes it does. Thousands of people has bought and installed it with no issues. At most, they might have to go buy some new screws.
You just didn’t install it correctly then.
Is this Air income legal for switzerland?
I dont know that. I'm just a US based youtuber.
You need to check with your local laws prior to doing any modification to your vehicle.
Flexx Alexander thanks man
stock exhaust?
czcams.com/video/Ve7utsSTieo/video.html
I want buy this!give me link ok?
As clearly mentioned in the video, look in the video description on how to buy.
This fit a 2018 c300?
No. This is only for the C250 with the M271 EVO engine.
@@TheFlexxGarage can't find anywhere
wi fi when this virus shit get over we will make it
Was this intake better than the BMS one?
I seriously answered that questioned within the first minute of the video...lol
C250 diesel?
Petrol I believe.
Zafar Mahmood c200 c180 c250 1.8t turbo petrol diesel needed make if market is there we make it
I hear a lot about the 2012 w204 c300 having problems with a cold air intake as it will suck in hot air from the engine, will doing what flexx did in this video solve that issue? If anyone knows it would be much appreciated thanks!
1. You are asking about a c300 on a c250 video. Two different engines with 2 different intake setups.
2. Doesn’t matter what car you have, if you go with an open filter setup for an intake, it will suck in hot air. It’s not just an issue on a c300. It’s any car.
3. The only way around it is to basically cover the filter...just like how all cars come with an air filter inside a covered housing. That’s what I did with this c250 intake kit. It’s the best of both worlds. An open performance filter with a heat resistant cover. You can’t do this to a c300 because that car has a different intake setup and nobody makes a covered aftermarket intake kit. The only thing you can do to a c300 is replace the stock filter with a performance air filter and keep it inside the stock air box.
Hey man I have the same model. What site do you buy al your things from?
I say in every single video i made where to buy things.