I accidentally broke the USB connector on the AKAI MPK mini(Professional). It wasn't so easy, but I did fix it without giving up. Finally, I can practice making music.
What a service you are providing here. These USB B ports on these are breaking all the time. You are helping me get 'unstuck' . My pads were torn up-your close up pictures helped me retrace the connections to the USB on my MPK mini. Now for some microsurgery.
Bro, just want to say thank you so much for your video. If not I may have broke my rotary knob trying to remove it by pulling or twisting.... Who knew there was a cap on top with the hidden screw inside 😅 Bless you 🙌
@@manjkhan5826 hi, have a problem with one key, open and clean and work, after one week not working, think maybe rubber line to slide and not connect or wet air in Vietnam. Maybe you can help, because every week I must open keys and clean it for work
The usb port on the unit I was borrowing got damaged after hurrying to get gear off the stage at a show (I left the USB cable plugged in and threw it in my bag 😪) glad I will be able to fix it, thanks for the breakdown and repair!
Nice, Saves some time for a tear down and have a look at the PCB layout, components, ISP/jtag header and IC ID and what not. Don't fight with the USB connector bro. 😂
Does anyone know where to go for parts for the joystick? Dropped my mpk the other week and after that when moving the joystick to the right it gets stuck and doesnt spring back to the middle like it used to.
Hey am I at the part where I’m removing the old solder, but it isn’t working. The iron melts normal solder but really isn’t getting anywhere with the solder holding the USB connector in place. Any tips anyone thank you in advance
All the lights on my Akai mini is all on at the same time when I plugged it on my laptop any idea of what I can do to fix it ...... And my FL studio is not detecting the Akai mini also....
I think you said no lights at the moment when you plugged it, It means the connector has been damaged, you need to open. If it is you can follow my work
Hi I didn't want to remove it at 8:05, it was damaged and automatically removed. You don't need to remove it when you replace USB port but becarefull unexpected damage by your hand and tools. You want to have USB part number or the element part number?
manjentertainment.blogspot.com/2020/02/akai-mpk-mini-board-picture.html you can see the picture on top and element as below. www.google.com/search?q=smd+resistor&source=lmns&bih=729&biw=1241&hl=ko&ved=2ahUKEwjKl4uz6MPnAhVdw2EKHRTfDToQ_AUoAHoECAEQAA
Aha, the joystick had a screw, that little fukka did my head in ...so I just left it connected when I pulled my MPK apart after water damage...THANKS HEAPS.ps always add some fesh solder to the pad that you want to desolder and add a little Flux.
I dropped my device, so I opened it, and I returned it to the USB terminal, and I saw one of the legs of the chip written D1 was broken, so could I get a link to that part?
Hi Team NAIN www.google.com/url?sa=t&source=web&rct=j&url=www.mouser.ie/Passive-Components/Resistors/SMD-Resistors-Chip-Resistors/Datasheets/_/N-7h7yu%3Fkeyword%3DD1&ved=2ahUKEwiV-72Qj93oAhUyxYsBHZFbD7oQFjAMegQIAhAB&usg=AOvVaw09q2k4rKaNHvNQidkYQvEF Can you see the website? If there is the same size, color and text. It would be fine.
manjentertainment.blogspot.com/2020/02/akai-mpk-mini-board-picture.html you can see the picture, but it is looks like smd resistor. also can see as below www.google.com/search?q=smd+resistor&source=lmns&bih=729&biw=1241&hl=ko&ved=2ahUKEwjKl4uz6MPnAhVdw2EKHRTfDToQ_AUoAHoECAEQAA
Hello I’ve been having a really hard time finding a part and as a last resort I decided to ask in here, does anybody know what the little clasp is called that was pushed in at 11:26? I unfortunately broke mine and was wondering if there is a replacement or if I’m screwed, thanks 🙏🏼
@@dragon_666 Hi Royal Dragon www.ebuy7.com/item/ffc-fpc-flat-cable-socket-0-5mm-connector-flip-8-10-16-20-24-40-60p-16501238562 Could you see the site?
Hello. The pads of my akai do not work. I followed your video to take it apart, cleaned it up and nothing happens. When pressed they do not receive any signal. (I tried to do it like you, only from the plate and neither) Do you know if you have a solution, friend? D: Greetings
Hey there! I have the Akai MPK Mini rn here and a part is missing. D1 right behind the USB connector. I couldnt find anything in the internet about that part. Can you help me with that?
Hi AM, If i were you, i would try to check that all directions are ok or not. 1.when all is not ok, it must be broken. need to be replaced(i checked the knob and small PCB but i did not see, i can think of another second hand or useless one then can be replaced) 2.when some of them are ok, need to open and clean the small part of contact.
Před 4 lety+1
@@manjkhan5826 thnkyou.. I'll try to open it.. There are two of them are working
Hey, Thank you for makin this video, I have a question, I was trying to just soldier the wire w/out getting the USB type b mother connector(got one today but messed up the pins while trying to install, so just wanted to soldier the wires completely to the board, ex like dis video (czcams.com/video/vvhh-cWpMzI/video.html)) , but am confused as to which one out of the four holes are the data/ power and ground, would u know if there is a schematic of the circuit because I can't find it online,
Hi ! Nun Matters! Thank you so much to visit here , even if i can not upload busking videos due to corona-19 i think you want to see this page please visit the site as below , then you can see 5V(+), Ground(-), Data(+) and Data(-) thanks! electronics.stackexchange.com/questions/409160/usb-connector-pinout
@@thebangalorerealestatepodcast i think when i soldiered it back i messed up the pin in and outs, it was not transfering data from the keybaord to the computer so i just bought a new one lol
@@Nuns341 hey man you can save it.😅 I directly soldered it back on to the board...the top right is +5 ( Red). Top Left ( white ). Bottom left(green) Bottom right ( ground)
Very helpful video for my own repair, especially the part about how to remove the PCB while accommodating the protruding sustain jack. Thanks!
What a service you are providing here. These USB B ports on these are breaking all the time. You are helping me get 'unstuck' . My pads were torn up-your close up pictures helped me retrace the connections to the USB on my MPK mini. Now for some microsurgery.
Bro, just want to say thank you so much for your video. If not I may have broke my rotary knob trying to remove it by pulling or twisting.... Who knew there was a cap on top with the hidden screw inside 😅 Bless you 🙌
Hi 27needles1
Yeah you are right!
I was also trying to dismantle the knob but never working until i saw the circle rubber cover!
@@manjkhan5826 hi, have a problem with one key, open and clean and work, after one week not working, think maybe rubber line to slide and not connect or wet air in Vietnam. Maybe you can help, because every week I must open keys and clean it for work
The usb port on the unit I was borrowing got damaged after hurrying to get gear off the stage at a show (I left the USB cable plugged in and threw it in my bag 😪) glad I will be able to fix it, thanks for the breakdown and repair!
You're my freaking hero, and you're a legend for never giving up, and going all the way! Thanks!
Thank you so much for making this video. My akai needs to be repaired exactly as yours.
Thank you so much, brother! You saved me!
Nice, Saves some time for a tear down and have a look at the PCB layout, components, ISP/jtag header and IC ID and what not. Don't fight with the USB connector bro. 😂
Wow this is a great channel. How you don't have more subs blows my mind.
Thanks daaammmnn , i will have more subs.
Be happy today ^^
Perfect video, so helpful!! Thank you!!!
Helped a lot. Thank you for sharing your experience
I thank you too to watch my video!!^^
내가 무언가를 깰 때 내 동생이 나를 위해 고쳐🐰하지만 그는 항상 너처럼 오빠를 고쳐😊😊😊
환상적인 작품👍👍👍
You saved my life thank u
thank you...i got stuck at the 1/4" sustain jack...☺
bro , thank u so much , so helpful
very informative video thanks
Thanks for the video, tell me what is the value of the resistor in diagram R18. Lost smd.
thanks for your video
Thanks a lot!
Alessandro Longo
Be safe and happy day!
Does anyone know where to go for parts for the joystick? Dropped my mpk the other week and after that when moving the joystick to the right it gets stuck and doesnt spring back to the middle like it used to.
hey man just wondering if you could drop the link for the usb b connectors?
Hey am I at the part where I’m removing the old solder, but it isn’t working. The iron melts normal solder but really isn’t getting anywhere with the solder holding the USB connector in place. Any tips anyone thank you in advance
Hello Sir, what is that small element,is that a diode? that is my problem,
All the lights on my Akai mini is all on at the same time when I plugged it on my laptop any idea of what I can do to fix it ...... And my FL studio is not detecting the Akai mini also....
I think you said no lights at the moment when you plugged it,
It means the connector has been damaged, you need to open. If it is you can follow my work
Hi, Do you know how to fix akai mini mk3 it show error message "Upgrade V??.?? " on led screen. 😭
How much would you charge me to fix mine I have not got it yet but it need the same repair
ManJ...do you have the part number or a link? Also, at 8:05 you remove an element...why? Do I need to do this as well if I'm replacing the USB port?
Hi I didn't want to remove it at 8:05, it was damaged and automatically removed.
You don't need to remove it when you replace USB port but becarefull unexpected damage by your hand and tools.
You want to have USB part number or the element part number?
manjentertainment.blogspot.com/2020/02/akai-mpk-mini-board-picture.html
you can see the picture on top and element as below.
www.google.com/search?q=smd+resistor&source=lmns&bih=729&biw=1241&hl=ko&ved=2ahUKEwjKl4uz6MPnAhVdw2EKHRTfDToQ_AUoAHoECAEQAA
@@manjkhan5826 what number USB port?
Aha, the joystick had a screw, that little fukka did my head in ...so I just left it connected when I pulled my MPK apart after water damage...THANKS HEAPS.ps always add some fesh solder to the pad that you want to desolder and add a little Flux.
hello good afternoon What is the name of the black piece you replaced? Mine burned down but I don’t know the description of it. 8:32
Thank you. What happened at 6:47?
What happen to that IC part? Did you replace it? How do you know that number of the part?
Oh I see. I can see from other replys. .. It came our of the circuit board.
I dropped my device, so I opened it, and I returned it to the USB terminal, and I saw one of the legs of the chip written D1 was broken, so could I get a link to that part?
Hi Team NAIN
www.google.com/url?sa=t&source=web&rct=j&url=www.mouser.ie/Passive-Components/Resistors/SMD-Resistors-Chip-Resistors/Datasheets/_/N-7h7yu%3Fkeyword%3DD1&ved=2ahUKEwiV-72Qj93oAhUyxYsBHZFbD7oQFjAMegQIAhAB&usg=AOvVaw09q2k4rKaNHvNQidkYQvEF
Can you see the website?
If there is the same size, color and text. It would be fine.
d1 is missing (or I lost it) any luck?Does it work without it?
my usb plug is broken. please tell me what it is called so that I can order a new one
You put a jumpcut right at the most difficult part
Yes i did because i dont have the clamp of smart phone.. T..T...
I will buy it.
Sorry about that
@@Kijasmata Hi Maja Stina
I am sorry too.. T.T
How about this video?
It would help you. :》
czcams.com/video/htrcZuK_ZsY/video.html
Hey do you possibly have a part # for the small chip?
Opened mine up today to find it missing.
manjentertainment.blogspot.com/2020/02/akai-mpk-mini-board-picture.html
you can see the picture, but it is looks like smd resistor. also can see as below
www.google.com/search?q=smd+resistor&source=lmns&bih=729&biw=1241&hl=ko&ved=2ahUKEwjKl4uz6MPnAhVdw2EKHRTfDToQ_AUoAHoECAEQAA
@@manjkhan5826 thank you so much!
@@peterdeguzman763 wellcome!!
@@manjkhan5826 do you really need those pieces
So the midi could work?
@@ay4lex473i think .. it is probably about the start of midi, it is still working until now
Hello I’ve been having a really hard time finding a part and as a last resort I decided to ask in here, does anybody know what the little clasp is called that was pushed in at 11:26? I unfortunately broke mine and was wondering if there is a replacement or if I’m screwed, thanks 🙏🏼
I was trying to find out the component at 11:26
Do you have any picture in detail? or know name which is printed at the white flat cable?
ManJKhan I know it is a flat panel cable but it’s the little black clasp I’m looking for but I don’t know the correct name for it
@@dragon_666 Hi Royal Dragon
www.ebuy7.com/item/ffc-fpc-flat-cable-socket-0-5mm-connector-flip-8-10-16-20-24-40-60p-16501238562
Could you see the site?
ManJKhan yes I was able to see it but i found out it’s actually called a Strain Relief what I’m looking for but again..I don’t know what size
6:48 OMG A BABY CHIP CAME OFF NNNOOOOO
Hello. The pads of my akai do not work. I followed your video to take it apart, cleaned it up and nothing happens. When pressed they do not receive any signal. (I tried to do it like you, only from the plate and neither) Do you know if you have a solution, friend? D:
Greetings
Hello my friend, can you show me the part in the picture?
you have to put that film on it with the black boxes for the pads to work idk how he did it in the video without them
Hey there! I have the Akai MPK Mini rn here and a part is missing. D1 right behind the USB connector. I couldnt find anything in the internet about that part. Can you help me with that?
Ok i will try to find out , the word printed on the black device is dim, please give me couple of days
ManJKhan were you able to find the part name?
www.digikey.at/product-detail/en/texas-instruments/TPS3808G18DBVTG4/TPS3808G18DBVTG4-ND/1671552
@@walterjb14 sorry about that, i was not so i also made a reply to other people but no answer yet
@@walterjb14 wow you are the genius 👏
It is for lights?
Que numeración es el diodo d1 alguien sabe que numero es
Se quemo y no es visible con que reemplaza tbiem
62K
I wonder how hard it would be to put a raspberry pi into one of these things
It is only for action to be won.....
my knobs are not working. have solution bro?
Hi AM,
If i were you, i would try to check that all directions are ok or not.
1.when all is not ok, it must be broken. need to be replaced(i checked the knob and small PCB but i did not see, i can think of another second hand or useless one then can be replaced)
2.when some of them are ok, need to open and clean the small part of contact.
@@manjkhan5826 thnkyou.. I'll try to open it.. There are two of them are working
@cheer up!👍
Los chinos desarman hasta su madre y vuelven y la arman😂😂
My Korean🇰🇷 isn't perfect
I just tried my best.....🤗🤗🤗
thanks! Diya you do korean well now! i can understand what you want to say
Diya i am in india and making another video but it is not easy ~!
Do yourself a favor and get a Hakko or a Hakko rip off. There's a few good Weller's. Just make sure they use Hakko style replacement tips and wands.
Hey, Thank you for makin this video, I have a question, I was trying to just soldier the wire w/out getting the USB type b mother connector(got one today but messed up the pins while trying to install, so just wanted to soldier the wires completely to the board, ex like dis video (czcams.com/video/vvhh-cWpMzI/video.html)) , but am confused as to which one out of the four holes are the data/ power and ground, would u know if there is a schematic of the circuit because I can't find it online,
Hi ! Nun Matters!
Thank you so much to visit here , even if i can not upload busking videos due to corona-19
i think you want to see this page please visit the site as below , then you can see 5V(+), Ground(-), Data(+) and Data(-) thanks!
electronics.stackexchange.com/questions/409160/usb-connector-pinout
did you do it? What happend!
@@thebangalorerealestatepodcast i think when i soldiered it back i messed up the pin in and outs, it was not transfering data from the keybaord to the computer so i just bought a new one lol
@@Nuns341 hey man you can save it.😅 I directly soldered it back on to the board...the top right is +5 ( Red). Top Left ( white ). Bottom left(green) Bottom right ( ground)
czcams.com/video/YQVL0px-50M/video.html
This happened to me
I would do it my self I just don’t know how to Sauter The motherboard.
Wow 3:17
HOTAIR STATION 🤦♂️
exuse my language but how in the FUCK did you do this?