I've noticed in your previous videos, you mentioned how the pedal hanger was clamping too hard on the slider tubes causing binding. My extreme feels sluggish, as if the up and down resistance is high. I checked the extreme and it appears they have a solid piece of metal in the tube at the bottom where the pedal clamps are, which I assume addresses that problem. Then I also noticed you mentioning the motor spacer, and how you were going to sand them down a little bit. Did you end up doing so? If so, did it help? When I pushed my spacer in, it took some pushing to get it in, do you think I should also try sanding those spacer a little bit to fix the alignment?
Yeah I sanded the motor bracket spacers to make them a bit thinner. As they are easy to re make in laser cutting and different supplier stock will vary slightly. Recommend removing the linkage to check movement flow. Especially if the unit has had some time to settle in. See where it's binding and make changes as needed for smooth motion.
Wow I have a v4 as well.. those handles are sick. I wish I knew where to even begin on how to get that on mine. Awesome work man. Also is that a Sherman half seat stuck on the back there? I am really tall and seated riding is uncomfortable I was using a yoga block but I didnt like the look, so I am looking for something better.
Thankyou. Indeed og Sherman seat on back. It's needs to be more forward. still working out it's position. The 100mm stanchion mod increases stock seat height 30mm And then the og Sherman seat height too I'm 183cm tall and it's very comfortable seated height
A question: do you think it's possible to put the "Master Pro Pedal Holder" and "Master Pro Pedal Adjustment Base" on the Master to lower the pedal height???
@julianjc84, impassive mods! I have same issue with my pedals Master v1 being too angled steep. I noticed you ground down the metal to make pedals flat , what tools could I use or other options to resolve this? Appreciate your help.
is this the updated master? looking at a purchase and it states updated version however states nothing about the updates on this wheel...yes ,my first purchase of a wheel and that is why i am asking.
Factory stock master is 70mm travel And use the 70mm handle config. 100mm master, when you install custom +30mm longer stanchion poles to accommodate more travel (100mm). It adjusts the position of the batteries -18mm from the top and +12mm up from the pedals. That should explain the 70mm and 100mm
@@jc84com Did you just paste some velcro on the battery to get those pads on there? I sure hope the stock pads still fit after I put these roll cage handles on my Master. I dont know how to get other pads on without buying a whole new pad system.
@@Audiboxx you'll have to cut the corner bends off the stock pads and add some Velcro. Yes my pads are held on with Velcro, clean the boxes and pads with isopropyl, dry and adhere.
I have rode this Master and it feels amazing for a BEGODE.
You have more engineering knowledge than the entire engineering staff at Begode😂
Brilliant upgrades
Looks great 👍
👌👌So nice, very awsome job !!!
Nice video.. great mods!!!
Thats pretty nice
I've noticed in your previous videos, you mentioned how the pedal hanger was clamping too hard on the slider tubes causing binding. My extreme feels sluggish, as if the up and down resistance is high. I checked the extreme and it appears they have a solid piece of metal in the tube at the bottom where the pedal clamps are, which I assume addresses that problem. Then I also noticed you mentioning the motor spacer, and how you were going to sand them down a little bit. Did you end up doing so? If so, did it help? When I pushed my spacer in, it took some pushing to get it in, do you think I should also try sanding those spacer a little bit to fix the alignment?
Yeah I sanded the motor bracket spacers to make them a bit thinner. As they are easy to re make in laser cutting and different supplier stock will vary slightly.
Recommend removing the linkage to check movement flow.
Especially if the unit has had some time to settle in. See where it's binding and make changes as needed for smooth motion.
Did you 3d print the seat yourself? If yes.. where can I find the stl file?.. thanks in advance
OG Sherman Seat slightly modified
The wheel now uses a pitbike seat form 30$ AUD ali express
Wow I have a v4 as well.. those handles are sick. I wish I knew where to even begin on how to get that on mine. Awesome work man. Also is that a Sherman half seat stuck on the back there? I am really tall and seated riding is uncomfortable I was using a yoga block but I didnt like the look, so I am looking for something better.
Thankyou.
Indeed og Sherman seat on back.
It's needs to be more forward. still working out it's position.
The 100mm stanchion mod increases stock seat height 30mm
And then the og Sherman seat height too
I'm 183cm tall and it's very comfortable seated height
Класс! мне нравиться очень продумано, теперь думаю себе приобрести 3д принтер.
Thankyou, 3d 🖨️ are awesome 😎
A question: do you think it's possible to put the "Master Pro Pedal Holder" and "Master Pro Pedal Adjustment Base" on the Master to lower the pedal height???
Not familiar with the adjustment hanger device. However most things are possible.
Where did you get the front handle? Love it.
EUC.jc84.com
Where did you get the plans for this, I want to recreate for my begode t4!
Measured the unit
EUC.jc84.com
@julianjc84, impassive mods! I have same issue with my pedals Master v1 being too angled steep. I noticed you ground down the metal to make pedals flat , what tools could I use or other options to resolve this? Appreciate your help.
Angle grider with sand disc
Or
Manual file and effort
is this the updated master? looking at a purchase and it states updated version however states nothing about the updates on this wheel...yes ,my first purchase of a wheel and that is why i am asking.
Nice work. Will the kit be available for purchase or only the stl?
EUC.jc84.com
I need that front handle
EUC.JC84.COM They will be available there soon when I am happy with the Masters Final design.
What are the size for the stanchion tube bushings on the EX30?
id30
OD34
L12
Whatsup with the 70mm or 100mm handles? If I have a regular begode master should I use the 70mm version?
Factory stock master is 70mm travel And use the 70mm handle config.
100mm master, when you install custom +30mm longer stanchion poles to accommodate more travel (100mm). It adjusts the position of the batteries -18mm from the top and +12mm up from the pedals.
That should explain the 70mm and 100mm
@@jc84com Did you just paste some velcro on the battery to get those pads on there?
I sure hope the stock pads still fit after I put these roll cage handles on my Master.
I dont know how to get other pads on without buying a whole new pad system.
@@Audiboxx you'll have to cut the corner bends off the stock pads and add some Velcro.
Yes my pads are held on with Velcro, clean the boxes and pads with isopropyl, dry and adhere.
Do u think this 100mm slider mod can be made to master v1?
I would suspect so.
I don't believe much on any core frame changes changed between v1 and v4
How can i contact you? Need to ask you something 🙏
@@doubleSGtrouble
m.me/julianjc84
How can I buy your handles?
EUC.jc84.com
source for stanchions ?
I got random tubes on AliExpress and cut myself
However
Hou Ningning also makes and sells pre cut
Get a Lynx.
And show me how to make it better. Please. Thank you.
I'm too poor for a lynx
feel free to start with the shitty axle that breaks to pieces after one or two months of jumping. You're welcome :D
когда можно купить
Not ready for release yet
EUC.jc84.com