1JZGTE POWERED LJ HOLDEN TORANA EP 7 - THE SKID FACTORY
Vložit
- čas přidán 20. 08. 2024
- Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory, A new brake booster assembly has been fitted to gain some more room between the turbo and master cylinder. A Mild steel exhaust system is also fabricated.
The engine is then removed for the 91st time so that the engine bay can then be prepped for paint next week.
\/\/\/ Ebay Alloy Radiator found here \/\/\/
ebay.to/35cMfqQ
^^^^
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
www.instagram....
www.instagram....
/ theskidfactory
www.instagram....
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. - Auta a dopravní prostředky
If you don’t stay till the end you’re a Chooch... bit.ly/3jZueke
Should make a preorder Christmas singlets with turbo's inplace of snow flakes, drag light tree inplace of xmas pines and lemon squashes inplace of candy canes. Would rock 1 of those in the festive season
Hey Google, Define "Chooch"...
Best outtakes yet!
Who's the Chooch, Al?
Could you of put the booster on passenger side like Opel corsas or try will it fit behind the dash on inside passenger side?
I think we can all collectively agree we LOVE when Alan goes in depth on the reasons things are the way they are.
Whole reason i watch
Can we get a technically speaking segment please
The Russell coightesque dancing at the end was hilarious
indeed it was.
when Yoda starts stumbling his words you know youre about to be hit with some serious info
Truth
BEST OUTRO's EVER!!!
Every time the 8 ball pops up I laugh a little bit harder than the last time. :')
Is it on the merchandise yet
In this episode, Al explains why he's right with what patience remains for the Torana. I'm waiting for Woody to eventually zoom in on one of Al's eyes twitching.
With what took seconds of planning turned into weeks of building, and months of taking stuff out again, and years for a date of completion, good jokes and banter are what fuelled Woody and Al, years later the job was complete but they were frail and old... lemon squash anybody?
This episode might as well have been thumbnailed "Disrespected Milk Crate". Love this show. Thanks for keeping up the awesome work!
15:53 Using a spirit level to find the middle of an elbow. All this time and Al is still taking me to school.
That's the fastest I've ever seen Al move... and he was basically standing in place the entire time. XD
I liked the way you gave the viewer credit for the engine removal idea. Many people would not have been confident enough to admit that they can learn something. Good job!
I love Woody kaking himself at the end, totally uncontrollable laughter is the best
“The day after my birthday is not my birthday mom” - Al
He is a very intelligent man
He’s got hurt feelings
@@chaunster the humans are dead!
@@chaunster Came here to say exactly that!
amazing line, not sure where it’s from but it’s funny af
I understood that reference - Cap
Gotta love the engine in engine out dance.
Years ago i fitted a vh40 booster to a 1964 fj45 Landcruiser. 4 wheel twin slave cylinder drums. Best move ever
That is how a budget exhaust is built, fast and simple with the mig. Mint work.
Ooooooo, AWESOME TSHIRT IDEA!! Picture of Al with the hat and sunglasses and it says "hey little girl, I have a hat and no cattle "
I said "RUSTIC!"
Allen under his breath "same thing."
I believe it is pronounced ‘rustique’
Al's Rhodesian Ridgeback is the true MVP.
Al....LOVE these technical tangents you go off on. We're all here for that knowledge. Keep it up!
I don't know if they make an award for "best outro 2020" but I think you've won it!
That was the best ending to a youtube video in the history of youtube videos. Brilliant work!
That was... hands down, the best extro bit, ever.
You had me at 'The Rework Factory'. Nice episode gents!
30:25 Rumby and his dad both have their right foot extended.
Where I work we refer to milk crates as dairy companion cubes.
milk crates = modular furniture
Al's tangent stories are excellent. What a pool of knowledge!
17:36 Flight of the Conchords. Nice.
We’re you ever made fun of cos in school you took drama, have you ever been told that you look like a llama
I finally realised why I like this series more than the mr2's. Woody doesn't looks like Chick Hicks any more! :)
Pulling something off and doing it again pretty much sums up my teens.
Hands down the funniest thing I’ve ever seen on this channel. Watch to the end, folks.
The down pipe looks correctly orientated here in the States.
That tanget about brake boosters was a long way to say *"Use ya brain!"* 😂😂
We do it right, Cause we do it twice! Story of my life.
You forgot about having to run vacuum to the booster in the boot also.
Great work guys, I think it’s awesome how you explain everything your doing. I don’t understand idiots complaining, if you don’t like don’t watch, easy as that.
I love these simple build exhausts, No one needs a fancy high polished tig welded exhaust under the Car.
High polished exhaust under the Car look like shit after 1000km of driving.
And anything after the Turbo dont has to be backpurged in my opinion.
Greetings from Germany 🇩🇪
Yup, mild steel works just fine.
@@nordic5490 i dont talk about mild steele.
I would use quality stainless for everything (exhaust parts and welding wire for the Mag welder)
@@freakyRunner what gas do you use when welding stainless steel with your MAG welder?
@@hanselloig7050 Argon with 2%Co2 someone told me.
Sorry i am not a expert welder at all.
If i could i would weld even without gas hahaha.
Yoda and the pup giving woody the same look at the end though🤣🤣🤣
The looks at the camera when welding where golden 🤣
I giggle every time that eight ball turns up somewhere, but that dance Al did at the end had me laughing out loud.
Keep the great videos coming guys.
Didn’t know you could dance Al. What a pleasant and entertaining surprise.😁👍🏼🤘🏼😎
I thought I was back in the plumbing barn teaching plumbing apprentices with all the art work on everything, ha ha, GREAT EP thanks boys I'm over COVID in Vic Cheers RUSTY.
Beautiful explanation of how Brake Boosters work! Thanks! I remember the Remote Boosters from restoring an Old Dodge DeSoto. Absolutely impractical.
Hydraboost, in this application, would be just as impractical. We used to use them on big Cam Carbureted Engines that didn't have enough vacuum to operate a Vacuum Booster.
You made the best choice - but you don't need me to tell you that!! 😜
Always pulling something off and doing it again, Straya!
I'm crying pmsl, what an end of an episode, thank you guys, you do bring so much happiness to us all thank you 😁
love the welding montage with sound
new and epic,!
Loving the build, my first road car all the way up here in Scotland was a Vauxhall Viva in metallic green with a black vinyl roof ... I think that roof scoop should stay :)
Christmas gift idea.......budgie smugglers with skid factory burnt out holesaw on the back..yesssss.
Hopefully you get some good footage of the engine bay prep and clean up! Be great to see!
Always enjoy the fab work done on the cars, it goes to show that not being afraid to try something might mean that it does not work the first second or even tenth time but in the end it all works.
Audi could learn a lot from Al about keeping exhaust away from tailshafts. Actually they could learn a lot in general about how to build reliable cars.
Welcome back to the Brake Factory
The no look welds, skill, class and ability
You guys are bloody legends makes me day when you guys upload !
Havent laughed so hard in a long long time .... well hi little lady ... hahahaha.. Al you clown .. hahaha
The welding time lapse at 18:45 is bad ass
I like the "Robocop shooting a baddie" look-away technique for the tack welds.
Here at re-skid factory we like both types of music...Country and Western!
20:35 I'm gunna say yes, and then not do it 😆
My mate, who is a red headed courier driver, recently rolled his hiace van, in NSW mind you. How common is it for red headed courier drivers to exist, let alone ones that roll their vans...
They can't be the same people, surely haha.
Wasn't in newy was it ?
Allan Herbert In the area, yeah. He was hit by someone and rolled it.
CulpritMedia passenger or pedestrian?
Frank The tank My mate was driving the van, someone turned into him and sent him rollin rollin rollin.
Who got the brake booster?
"Big Hat, No Cattle" I though no one else said that hahah
The outro is getting better and better. What a chooch
That's an 11/10 doggo right there
I had a Hk premier wagon with power drums from factory. At slow speeds they were deadly, you could tell it was me in the carpark with my face on the windscreen.
Trailers are as good as the video... how many lemon squashes did Al have before he would dance for you? Priceless
🤣 the D&B artwork... it totally looks like a spaceship
love the rhodesian ridgeback
Love the music for the exhaust fab section.
That was the best ending ever. To make the videos ever better , Just add some Pink Floyd .
lemon squash , the hat and glasses chooch well on Al .
that's the funniest ending I think I've ever seen
and you've made Russell Coight ever so proud.
IT ALSO LEAVES A... BETTER... FINISH... AFTER BEING WELDED. good diction woody
great ep btw
camera work getting real good!
the many talents of turbo yoda
As usual the best part of my day is watching a Skid Factory video.
PS. Can you guys please get in touch with Jarrad Wright and ask him to make more Big Lez or Mike Nolan episodes. Cheers.
LOL I'm so glad I stayed until the end.
Jam tins (Drum brakes) were notorious for locking up a wheel when badly adjusted which was a great way to explain "self energising" and I had that issue a few times back in the day.
I daily drove a Val for years with 4 wheel jam tins and non boosted brakes and it was as good as a disc drum combo and IMO better than 4 wheel discs in the early days of Aussie performance brakes on production cars.
11 inch finned drums, 3 on the tree and mountain driving wasnt an issue even if I was fanging on my way to work coz it was all in good working order.
8 years ago I revisited that setup in a project car and time obviously made me forget how bloody scary drum brakes were but again after a new master, hard lines and hoses and new drums, slaves etc I got the new non asbestos shoes to break in even and was amazed at how good this old style of stopper really was and especially when towing a ton in a trailer.
I did add a bias valve to tweak the front/rear brake bias though lol
That dance at the end was gold. Laughed so hard I had tears in my eyes
Beautiful ridgeback!
Al working his "magic" again.
im impressed at how good you can draw inside a tube like that
This show has the best out takes/bloopers hands down.
Trust down in Melb we will still be in hoodies in December...
Benny's camera guy is wearing a poverty parka in today video . isn't it 45C down in Vic rn ?
you wont be able to get em in when we lower the dome over vic
@@kasnitch even if it is, it probably rained in the morning, snowed midday and in the evening the wind would lift one.
Hey little lady a big hat and no cattle 🐄 loved dance 🤪🤣🤣🤣
i still cant get over the fact that that car was based on the humble vauxhall viva.mind boggling
love the bits at the end hahaha... always have a big smile on me face
Bigups to the sound editor. Syncing those one hits and music drops with weld spatter. Maybe I’m just baked.
That has to be the next big graphic on your merch, riding the engine like a bull! ROFL
Best Rhodesian ridgeback!
Best thumbnail ever!
Thanks for the information on brake boosters. Very informative
Good effort fullas , God wide view of the cool tool chest...all the best ..will keep watching. 👌
Lol your dog is looking at Woody, like "WTH is he doing?".
One nice looking ridgeback.
Love your work, no excuses required, conditional of corse ;). Twin leading shoe brakes, hot set on old school drum brake motor cross bikes. Rotation of brake drum 'dragged' brake shoe into itself, increasing break pressure. Hours spent seating, servicing and tweaking, while dreaming of disc breaks. Ah the good old days, c ough.
Yeah... Melbourne is a bit weird at the moment.
But we'll get through it, and you'll get you'll get your parts sorted soon.
The intros are getting better and better haha
Al was rocking his standard Blue Steel look
I’m here for the outtakes 😂😂😂
We used to fit the PBR VH44 to customers cars in the 60's, Holdens, Zephyr's, Vauxhall's, etc. A sticker came in the box which went on the back window warning following drivers that the car in front had power brakes ,"Beware - Power Brakes" it said from memory. We'd warn the customer before he/she left the workshop to be careful at first with the brakes as they wouldn't need as much pedal pressure. So they'd drive off happy as Larry and seconds later we'd hear this god-almighty screech of tyres, we'd rush out onto the driveway and it was just our customer sliding in a cloud of tyre smoke to their first "power brake" stop at the traffic lights down the street... It would happen every time.
I have the same memory, and these were cars with single circuit, 4 wheel drums
@@jrobpat0154 Yep, that's right. This was before disk brakes came on the scene.
Another amazing episode!
In depth mechanical teachings AND a goodest boy? It doesn't really get any better :)
Note to self...... lemon squash = Chooch dance in a can.....