Hello,bai Sir,Matz long time no hear frm u,1st of all GOD BLESS su n Family pati po, ang team ng Matz internatio nal para skin Sir,no.wahed ka Dodong iba ka Idol..💪👍
Medyo delikado mag rev ng ganyan kalakas 4K RPM ng naka Drive or Reverse maski sabihin pang sira transmission nyan at baka bigla yang kumagat eh alam na ang kakahinatnan nyan. Pwedeng makamatay ng nasa paligid yan, biglang lilipad yan. Dapat konteng rev lang for safety. Ramdam naman kung may kagat o wala e. Sapat na yon. (Hinde po eto pang bash. Safety lang)
I'm not a mechanic, at least naa nakoy idea kong og unsay possibly nga problema sakong angkol nga sakyanan! Ford Explorer automatic iyang sakyanan dol Matz unya mo abante dagan pero inig ipa atras walay power basin diay same rag problema hehe watching from canada dol puhon inig uli nako cdo makita tika hehe (:
Good afternoon boss Matz, magtatanong lng sana ako. yung Chevrolet Captiva Diesel, halimbawa nakadrive sya, ngayon hihinto ako at ikambyo ko sya sa Reverse, pag medyo apakan ko agad yung accelrator may kaldag sya, pero pag dahan dahan naman na apakan accelerator wala syang kaldag. posible ba na parang maluwang yung sa transmission? Salamat ng marami sa sagot mo Boos Matz.
Sir Matz, may tanong lang po ako.. Ford Ranger XLT Auto 4x2 2024 yong unit ko, bagong kuha ko palang. Normal lang ba na hanggang 3k lang yong RPM niya at ayaw talaga lumagpas sa 3k.
Idol pwedi mahibaw an ang brand at model ng coputer na ginagamit na pang scan?shout out idol naman idol from Norala south cotabato kornadal city,whatchin from kuwait.
To be honest, I find the design of that gear and sleeve with 4 stoppers to be STUPID. That mechanical design at first will not be able to withstand very heavy load and eventually the material will wear down in a short period of time. If the material is an Aluminum alloy, it will easily wear down as compared to an Iron alloy. For short, Material Science and Material Engineering must be strongly considered. In Mechanical Machine Design, A Mechanical Engineer should design a machine, mechanical part, machine member or linkage that should be reliable, durable, maintainable, efficient, safe, and long lasting. The Engineer should design a Machine, a mechanical part, a machine member or a linkage that should not easily fail and not easily wear down. The Design of the Machine/Mechanical part should also consider the best material to be used that will make the engine durable, reliable, efficient and safe to operate.
Ford Raftor 2019? anong klasing pyesa ambilis nasira? nawala ang forward reverse dahil doon sa nakalbo or lossen na 4 section ng parts...Kitang kita ang poor quality ng parts, Inaaway ng America ang China pero doon din sila nagpapagawa ng pyesa tapos ibenta ng mahal ang sasakyan. supposedly in 5 years di pa dapat masira, puro porma lang itong Ford pero papatayin ka sa short period of performance ng sasakyan butas ang bulsa mo sa Maintenance.....Buti na lang andyan ka Matz-Skie magaling na Mekaniko kung sa Casa yan paktay lusbot ang bulsa ng may-ari.
boss pde ko mangayo imo number boss? aha dapit inyo oroquieta? naa ko raptor boss 2020 nag check engine kalit lng daun kusog kaau mo vibrate and wala nay kusog mo dagan. ang 2000 rpm kay naa ra sa 10-20 km/p ang dagan mangayo ta ko sa imong number boss @Matz Mechanic
To be honest, I find the design of that gear and sleeve with 4 stoppers to be STUPID. That mechanical design at first will not be able to withstand very heavy load and eventually the material will wear down in a short period of time. If the material is an Aluminum alloy, it will easily wear down as compared to an Iron alloy. For short, Material Science and Material Engineering must be strongly considered. In Mechanical Machine Design, A Mechanical Engineer should design a machine, mechanical part, machine member or linkage that should be reliable, durable, maintainable, efficient, safe, and long lasting. The Engineer should design a Machine, a mechanical part, a machine member or a linkage that should not easily fail and not easily wear down. The Design of the Machine/Mechanical part should also consider the best material to be used that will make the engine durable, reliable, efficient and safe to operate.
Matz, saludo rin ako sa mga gapang boys na nagbaklas ng transmission sa dilim.
SHOUT OUT SA FORD LAGI NLANG KAU NSA VIDEO NI IDOL.. AHAHAHA
PAGNAKA LUWAG LUWAG KA LODS MAGINVEST KA SA LIFTER PAR SMOOTH ANG GALAWAN SALUTE WATCHING FROM JAPAN🇯🇵💪
Lefter hanging jack
Hello,bai Sir,Matz long time
no hear frm u,1st of all GOD
BLESS su n Family pati po,
ang team ng Matz internatio
nal para skin Sir,no.wahed ka Dodong iba ka Idol..💪👍
lingawa nakin sa BisLog Bai 😂👍
kapapanood ko lang mga videos niya, madami akong natutunan. ipagpatuloy mo lang yan idol God bless u!
Kuyawa jd kaau ui heheh
God bless hwg makalimot sa Panginoon. Good luck bro.! 🙏🙏🙏
Ang Ford ay para lang sa naay kwarta. Kung dili naga awas inyong kwarta ay ayaw ug palit ug Ford.....hahahahaha..
Mahina talaga ang pyesa ng ford no lalo sa transmission. Bago bago pa yan
Mistsu ko 2013 pa.. gang ngayon ok pa
Maayong gabii sir Matz
FORD na naman 😆 present sir!
Ford nanaman... ano ba yan... pero goods ito para sa mga mekaniko. Tuloy tuloy ang negosyo 😂
Magaling talaga Ng team ninyo nat lalo na kayo
Dalia ra napuno shop nimu dol. Sauna imu motor ug expander ra naa dha. Payter... Congrats dol
pag may gawa, may chickengin na naman😅😅😅👍👍👍👏👏👏
Salamat sa imo amo ! Madami ako natutunan sa imo !
nice job matzki....👍👍👍👏👏👏
Good job bro Matz..God Bless
Lagnot dala ibot hahaha Good job Good job 💪
Ang tibay talaga ng mga Ford, pag palitan mo lang ng piyesa andar na ulit!
Good job idol boss Mateo
Your the best matz
Pa shout out Lods Matzkie. Maraming salamat for sharing your knowledge for us DIY'ers.🙏
Yan ang simula ng bagong buhay mo.naka angat ka na
Pang mayaman tlga pagFORD! Pagbili mo kc lagi ka paayos😂😂😂
Ganyan tlaga kapag maforma yung sasakyan magastos sa repair 😂😂😂 iiyak k kapag wla kng budget s maintenance 😅
Boss asa ka ma kontak, unsa imo number tawag ko
Good job matz
All goods boss. .
Under size man bai yung pyesa kaya laging basag hehehe
Napaka reliable talaga ng Ford 🔥
Hhahhaaha samokas para lumaki ang labor
Boss pano mag adjust ng idle canter truck electronics siya?
galing ah
2019 may sira agad, ang mahirap abutan k ng sira sa daan
Buslot nasad pitaka matz 😁
eto yung 1st batch ng Raptor na may issue sa transmission dhil 2019 eh
Ayos idol
Sikwate Transmission Hahaha. Buti na lang may bolang kristal. Hahahaha
Kabag o pa anang mananapa uy... FORD = Fix Or Repair Daily daw meaning ana.
Bobo
Walay sign sa pitaka idol Matz hehe
Medyo delikado mag rev ng ganyan kalakas 4K RPM ng naka Drive or Reverse maski sabihin pang sira transmission nyan at baka bigla yang kumagat eh alam na ang kakahinatnan nyan. Pwedeng makamatay ng nasa paligid yan, biglang lilipad yan. Dapat konteng rev lang for safety. Ramdam naman kung may kagat o wala e. Sapat na yon. (Hinde po eto pang bash. Safety lang)
Kaya nga sir same tayo ng iniisip 😅 delikado talaga
Alam naman niya ginagawa niya kaya ganun, huwag kayp bitter, hahahhahahahhahaaaaa
I'm not a mechanic, at least naa nakoy idea kong og unsay possibly nga problema sakong angkol nga sakyanan! Ford Explorer automatic iyang sakyanan dol Matz unya mo abante dagan pero inig ipa atras walay power basin diay same rag problema hehe watching from canada dol puhon inig uli nako cdo makita tika hehe (:
Goodjob idol
Sir matz, unta makalaag mo sa gensan kay akong navara gasiga airbag. Hehe
Good afternoon boss Matz, magtatanong lng sana ako. yung Chevrolet Captiva Diesel, halimbawa nakadrive sya, ngayon hihinto ako at ikambyo ko sya sa Reverse, pag medyo apakan ko agad yung accelrator may kaldag sya, pero pag dahan dahan naman na apakan accelerator wala syang kaldag. posible ba na parang maluwang yung sa transmission? Salamat ng marami sa sagot mo Boos Matz.
👍👍👍👍👍👍
Idol Matz, ask ko lng kng ano kya pro ba ford explorer ko. Nalabas AWD OFF habamg na andar bgo wala power. Thanks
Sir evening may tanong ako ilang volts supply sa scv ug asa gikan supply na positive sir Toyota Hilux 2007 model ang pock up sir
Helper aku sayu idol
Boss,unsay posibleng hinungdan nga naharos mana nga gear?
Ang driver anang Ford murag mahilig ug neutral mintras naka stop ang sakyanan????
Sir Matz, may tanong lang po ako.. Ford Ranger XLT Auto 4x2 2024 yong unit ko, bagong kuha ko palang. Normal lang ba na hanggang 3k lang yong RPM niya at ayaw talaga lumagpas sa 3k.
Idol pwedi mahibaw an ang brand at model ng coputer na ginagamit na pang scan?shout out idol naman idol from Norala south cotabato kornadal city,whatchin from kuwait.
Pinag pala ka kaya ingatan mo..wag magbabago ang iyong ugali pakikisama sa taong nakapaligid sa iyo
Madali lang kay matz nagawa nya den to sa everest datee❤😊
Asa inyong lugar idol?
Boss ano kaya problema dito sa raptor ko? Malakas ang hugong
Banat lods
Awesome Job Pud Matz
Imoha na shop boss matz...
Idol lagnot dala ibot
Iyang sensor SA transmission
Sarili na nimo nga shop dol
🤟🤟🤟👏👏👏👍👍👍
To be honest, I find the design of that gear and sleeve with 4 stoppers to be STUPID. That mechanical design at first will not be able to withstand very heavy load and eventually the material will wear down in a short period of time. If the material is an Aluminum alloy, it will easily wear down as compared to an Iron alloy. For short, Material Science and Material Engineering must be strongly considered. In Mechanical Machine Design, A Mechanical Engineer should design a machine, mechanical part, machine member or linkage that should be reliable, durable, maintainable, efficient, safe, and long lasting. The Engineer should design a Machine, a mechanical part, a machine member or a linkage that should not easily fail and not easily wear down. The Design of the Machine/Mechanical part should also consider the best material to be used that will make the engine durable, reliable, efficient and safe to operate.
idol matz! solid follower here from iligan❤️
Matz ki murag Ford mga pasyente nimo
Boss Bago Ng shop nimo?
Boss matz Unsaon pag apply ug helper dha boss
Boss matz ano cause kapag ganyan Ang sira
Raptor pamorma Lang talaga pero sirain mga parts
First 😂😂
Ang mga bagong sasakyan ay ang mga pinaka-walang kwenta,maganda pa ang itsura ayaw nang umandar.
No reverse, See owner's manual.
Boss location nyo boss
boss ano kailangan linisan sa toyota vios malakas kumain sa gas 2019 model vvti automatic thank you boss sa reply
Ang gawin mo idol e fulltank mo tapos wagmo gamitin pra tipid sa gas
fordoy nasad.
Basic parin
Matz ano contact number mo?
Thats a ranger, not a raptor
Ford RANGER raptor po
@@yasins.macapodi7921 correct, that's what the title should have said, but it didn't
FORD RANGER CORRUPTOR.
Sakit talaga ng Pinoy parang hindi makatulog kong hindi makapag correction.
Hahaha big deal ba sayo yan? Nako po!
Sakit ng ford yan.
Ford Raftor 2019? anong klasing pyesa ambilis nasira? nawala ang forward reverse dahil doon sa nakalbo or lossen na 4 section ng parts...Kitang kita ang poor quality ng parts, Inaaway ng America ang China pero doon din sila nagpapagawa ng pyesa tapos ibenta ng mahal ang sasakyan. supposedly in 5 years di pa dapat masira, puro porma lang itong Ford pero papatayin ka sa short period of performance ng sasakyan butas ang bulsa mo sa Maintenance.....Buti na lang andyan ka Matz-Skie magaling na Mekaniko kung sa Casa yan paktay lusbot ang bulsa ng may-ari.
Nalaing ka talaga Bay....ayos, galit na naman mga basher mo yan
boss pde ko mangayo imo number boss? aha dapit inyo oroquieta? naa ko raptor boss 2020 nag check engine kalit lng daun kusog kaau mo vibrate and wala nay kusog mo dagan. ang 2000 rpm kay naa ra sa 10-20 km/p ang dagan
mangayo ta ko sa imong number boss @Matz Mechanic
09502193807 Lopez Jaena Misamis Occidental
@@matzmechanic lamat sa response dri boss. Nag txt ko nimo pud. and chat as well sa messenger
Puro ford 😂😂😂
To be honest, I find the design of that gear and sleeve with 4 stoppers to be STUPID. That mechanical design at first will not be able to withstand very heavy load and eventually the material will wear down in a short period of time. If the material is an Aluminum alloy, it will easily wear down as compared to an Iron alloy. For short, Material Science and Material Engineering must be strongly considered. In Mechanical Machine Design, A Mechanical Engineer should design a machine, mechanical part, machine member or linkage that should be reliable, durable, maintainable, efficient, safe, and long lasting. The Engineer should design a Machine, a mechanical part, a machine member or a linkage that should not easily fail and not easily wear down. The Design of the Machine/Mechanical part should also consider the best material to be used that will make the engine durable, reliable, efficient and safe to operate.
Don’t be surprise, it’s design is for business not for durability.
@@novymacahilig6258 You said it right.