Sounds: Partscaster Telecaster 2024 Worn Rustic Old World Burst HH Hot Rails Lightweight Coil Split

Reverb shop: Search: "Werner Guitars" reverb.com/sho...
Ebay shop: Search: "WernerGuitars" www.ebay.com/u...
Sweetwater Gear Exchange: Search: "Werner Guitars" www.sweetwater...
Equipment used: Fender Frontman 25R 2-channel solid state amp through Blue Yeti Mic with no pedals (straight to amp). Amp settings: Treble-8.3, Middle 8.1, Bass 8.7, Reverb-2, Normal Volume-2, Gain-3, Drive Volume-2.2. Mic is on the floor 2 foot in front of the amp. The amp is 2.5 foot off the floor slightly tilted up on an amp stand. Played in large open-space room. (Open to suggestions on mic and amp settings from sound engineers or those more experienced with amp/mic placement.)
Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.:
Full-spectrum Resistance 21 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-pull coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone.
Burnished Worn Textured Sycamore body with Rustic Old World Burst Light Satin Nitro Finish
Maple neck with rosewood fretboard. Satin finish. 22 medium jumbo frets. 12" radius (1st fret 0.86, 12th fret 0.92)
Guitar Madness Tele Hot Rails Telecaster Bridge Pickup Ceramic 14k
Black Wilkinson Hot Rail Humbucker Neck Pickup 7k
Ultra-Light weight: Total weight of guitar is 5.4 pounds.
Black Wilkinson 3-saddle bridge with upgraded brass, threaded, compensated saddles and option for top-load.
Oak Grigsby 4-Way Blade Switch
Additional position for both pickups in series
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
Humbuckers individually partial split
D'Addario Nickel Wound XL 10-46 EXL110-10P
Body
Burnished Worn Textured Sycamore body with Rustic Old World Burst Light Satin Nitro Finish. You can feel and see the nice sycamore wood grain.
Neck
Maple neck with rosewood fretboard. Satin finish. 22 medium jumbo frets. 12" radius. From the back of the neck to the top of the fret on the 1st fret is 0.86". From the back of the neck to the top of the fret on the 12th fret is 0.92".
Electronics
Guitar Madness Tele Hot Rails Telecaster Bridge Pickup Ceramic 14k (Exact measure 13.8 ohms).
Black Wilkinson Hot Rail Humbucker Neck Pickup 7k (Exact measure 7.1 ohms).
Alpha 500K Volume & Tone Potentiometer Push/Pull Split Audio Taper
Oak Grigsby 4-Way Blade Switch
Additional position for both pickups in series
Humbuckers individually partial split
.022uf Mallory 400v Tone Capacitor
Pure Tone Chrome Mono output Jack
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
Hardware
Black Wilkinson 3-saddle bridge with upgraded brass, threaded, compensated saddles and option for top-load
Black control plate with black knobs and black switch tip
Black input jack plate
Black strap pin buttons
Black Wilkinson Tuners
Black neck plate
Black custom made pick guard
Black string trees
Black all-in-one string ferrule
Switching Positions as Follows:
1. Bridge (Resistance 13.8 ohms)
with (partial) coil split (tone knob only) 8.6 ohms
with (partial) coil split (tone & volume knob) 3.4 ohms
with (partial) coil split (volume knob only) 4.0 ohms
2. Bridge in parallel with Neck (regular Tele position ) (Resistance 4.7 ohms)
with (partial) coil split (tone knob only) 3.9 ohms
with (partial) coil split (tone & volume knob) 3.1 ohms
with (partial) coil split (volume knob only) 3.6 ohms
3. Neck (Resistance 7.1 ohms)
with (partial) coil split (volume knob only) 4.9 ohms
4. Neck in series with Bridge (Resistance 20.6 ohms)
with (partial) coil split (tone knob only) 15.5 ohms
with (partial) coil split (tone & volume knob) 5.3 ohms
with (partial) coil split (volume knob only) 5.4 ohms
Full range of resistance:
20.6 ohms
15.5 ohms
13.8 ohms
8.6 ohms
5.4 ohms
4.9 ohms
3.9 ohms
3.4 ohms
3.1 ohms