3 SIMPLE Dart 250g MODS 🚀
Vložit
- čas přidán 5. 09. 2024
- Three simple mods for your Dart 250g that I bought here bit.ly/38DMqeu The first is stand offs for the motor bit.ly/3f4F7yg, the next is almost free and the third, well see here bit.ly/30gitgV to really enjoy those late evenings and early mornings. Full setup detais below PRESS SHOW MORE to see it.
IMPORTANT:
All items shown have been BOUGHT out of MY OWN money for my own abuses. They are NOT a "freebies for review". As such my opinions of these items and anything else shown here may differ from other reviews because I've actually "bought it".
NOTES:
We are using aluminium stand offs rather than plastic ones because those could melt.
I have also used thread lock to secure the bolts to the motor to make sure they won't come loose. Someone mentioned thrust angle, not an issue the motor is pointing straight through the model.
ZOHD Dart 250g
- - - - - - - - -
View/buy link: bit.ly/39kPmNB
I went for the FPV kit, however now having owned this one and the Drift, definitely go for the PNP kit. The motor, ESC and servos are "good".
UDPATE:
This configuration has got me over 40Km in total distance flown!
My Configuration
- - - - - - - - -
Motor, ESC, Servos all stock. Using the 2 blade 5050 propeller
Flight Controller - bit.ly/2WE2TL6
GPS - bit.ly/2CQ5ECw
Front Camera - bit.ly/3jqiGqq
Rear View camera - bit.ly/30pBOwq
FPV
5.8Ghz vTx - TX526 - bit.ly/2HBOKVm
5.8Ghz Antenna - bit.ly/2Fmey5z
5.8GHz Goggles Antenna
- Diamond - bit.ly/2FlC9DF
- Clover - bit.ly/2Fmey5z
Definitely not using this bit.ly/3eN4Aw2
Batteries
LG MJ1 18650 Li-on batteries, soldered myself.
Receiver
- TBS Crossfire Micro V2 - www.hobbyrc.co...
- Immortal Antenna
Transmitter & Module
- Taranis - bit.ly/2XGra1m
- TBS Crossfire Full Tx module - www.hobbyrc.co...
iNav Settings Dump
- - - - - - - - -
pastebin.com/P...
ZOHD Dart 250g Description
- - - - - - - - -
Brand Name: ZOHD KIT
Item Name: Dart 250G
Material: High-Quality EPP
Wingspan: 570mm (22.44'')
Length: 379mm (14.92in'')
ZOHD Dart 250G - Kit : 89g
ZOHD Dart 250G - PNP: 138g (including motor, esc, servos, prop.)
ZOHD Dart 250G - FPV: 161g (including ZOHD Kopilot FC, GPS, VC400 Camera, no battery and receiver)
ZOHD Dart 250g Features
- - - - - - - - -
1. AUW is less than 250g, ideal to comply with Sub250g regulations
2. Durable EPP material, built-in CF spar for enhancement, crash resistant
3. Being light-weight will be safe to fly anywhere, anytime. You’re avoiding the hassle of an
FPV registration
4. Glue-free assembly, the main wing and tails come with pre-applied adhesive tape, just peel
it off and install them
5. Large battery bay for extended flight time
6. Nose camera bay compatible with all FPV and AIO cameras in the market
7. Cover for the fuselage bottom, super durable, protecting the fuselage bottom from
scratches
8. Servo arms are well protected by an EPP hump
9. Built-in CF rod in the ailerons will give precision and sharp action to your inputs
10. Dedicated equipment bay for Flight Controller and GPS
11. Main wing leading edge cover for those unexpected impacts
12. Textured areas on both side of the fuselage, for more secure hand launch grip
13. Optimized air-cooling design will keep your gear safe from overheating
ZOHD Dart 250g
- - - - - - - - -
View/buy link: bit.ly/39kPmNB
#ZOHD #Dart250g #Modifications
Enjoying what you're watching? ❤️
You can now support Matt from just £1.99 per month here czcams.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin
✅ Kept up to date with the latest events ✅ Early access to New Videos ✅ Updates on projects being worked on in the background ✅ Special emotes for comments & live chats ❤️ For full details, click here czcams.com/channels/WP6vjgBw1y15xHAyTDyUTw.htmljoin
I'm a bit sceptical about the aluminium foil. You would have to connect it to the electrical ground to really do something or else it would just shift the frequency/radiation pattern from what I understand about RF
Howdy Vincent, yes ideally they would need to be grounded. my point was it is unlikely to make any huge negative impacts only provide some positives for the ease/cost/weight side. Matt
100% works and helps if you are using 433 like ezuhf. I can also say 100% effective for improving GPS lock. One of my models I had the GPS mounted 15mm from the FC and GPS wouldn't look. I put copper tape between the GPS and flight controller (not grounded) and GPS lock was perfect from then on
@@statesmanls1 Copy tape around the wires between gps and fc, or just like a copper shield inbetween? cheers
Copper tape backplane will help a gps. Foil should be saved for hats
You can put the motor leads through some copper braid. Punched of coax like RG213 , Ground one end of the coax , Eg , Fix the one end to the negative on the FC flight controller , It acts as sort of Faraday screen .... You can do the same with the other cables .
It looks like you mounted your FC witht he heatsink out in the air through the canopy? That seems like a pretty good mod to talk about, too.
Instead of putting led at the back you can try to put vtx. I had similar setup at balance it without led.
Yeah my 1st thought as you opened the back lid was, that's going to explode the moment he plugs it in. Then I kept listening and after you mentioning wrapping parts up with insulation material, now would be more concerned about overheating components. ... hottest component on my list is my 800mw vtx.
yea none of that lot gets warm, event he ESC as it's only pulling a few amps anyway. Matt
I love the Cat 2 fpv camera by far the best one I own..
What model do you have it in? I have one and undecided what to put it in. More than likely one of my quads.
Great content! Enjoy the heck out of my (now 3rd) dart250.
I had a double stupid maiden. I had everything just right and then went to go fly and right aileron was appearing left and vice-versa. Crashed in the corn field (mostly horizontally) dusted off went through all checks again, couldn't find anything wrong with the servo movements. Looked at the camera and I just didn't flip the horizontal image so I changed out the battery and went for it again , and 💥.... didn't SAVE IT !!!
All I can say now is welder glue is certainly my friend. And save your camera settings!
Try some sticky backed aluminium foil tape instead of the foil Matt , available at car body repair supply shops or probably online too, around 2quid a roll 😉👍
Hey Matt, re the GPS. Did you apply hot glue to the top of the GPS and attach it to the top of the fuse, or did you glue it to the floor?
I'm trying to work out if hot glue will affect GPS reception if I apply glue to the GPS antenna, and attach it to the top......
Hey Matt, actually I'm using a huge puck one now and it's just wedged in there and won't move. For the smaller one, I did use double sided tape, that worked well and was a bastard to get out. So probably a better idea than hot glue? Hope that helps Matt Oh and DO NOT glue to the metal top of the GPS if it has no cover! Glue from the underside so you don't wreck the GPS antenna. Matt
Hi Matt. Hope you are well. Thanks for these great vids. I had a question.... i have a matek f405 wing board with only 2 esc pads. Im now using the board for a tri copter vtol and wanted to use a 3rd esc.... can i use multiple escs off each esc pad on the flight control board?
how on earth did you manage to wire a TBS Crossfire Micro V2 in this config???!!!! please make a video on that alone!
Hi Matt
Have you worked out a safe landing voltage so esc and f/c will not shut down.
You did 40 km.
What was your landing voltage and flight time?
Howdy David, the model had a tail wind to get to its destination, see the review I did of the Caddx ratel FPV camera has that has the 47.92Km flight in there and the summary screen too I think. Matt
With all done, how many grams will your Dart come in at?
Hey Matt good suggestions. What VTX and antenna are you using in the 250g and what propeller size. Thanks for the info.
Howdy Ty, just seen your question. My bad. The power train is stock and I'm using the 2 blade 5050 propeller. This works really well. As for the CTX, defo not the Matek 1.2 module and I believe the antenna style is called VRX. I got them with some cheap VTX's I bought ages ago, but have never seen them for sale. Matt
When you said 100 I was like, cool, 60mph but then you said 109 'miles' per hour, wow, I didnt know that this was capable of that. Was that on 2s or more?
Also, with the tin foil wrapped electronics for rf shielding, if you could somehow solder them all to a common ground via some small wire, then it should be a lot more effective
Aryan Gangurde that’s on the Mini Drak, probably on 4s 👍
Yes thats right, the Mini Drak. As for a common ground, absolutely! Matt
Hi Mat
great mods
i ordered the 10 mil spacers you recommended but they did not have bolts to fit the dart?
what did you use?
thanks
nobby
In case you still didn't solve it or someone else has same problem. The motor takes m2 bolts. I got a box of various size/length bolts from amazon (~10 or 15 euro) and the m2 fits fine. I had more trouble finding spacers, and in the end I 3d printed one from thingiverse.
Hi Matt, hoe exactly did you mount the motor with those standoffs? Long M2 bolt from the motor mount thought the standoffs into the base of the motor? Or do you have screws from both sides into the standoffs? On the motor side the bell seems to be in the way for that. Thanks a lot.
@@RagTheNutsOff How are you getting the bolts in from the motor side? The bell is much larger than the 12x12 mm mounting holes.
@@RagTheNutsOff can you answer this question. I am having the same issue.
@@TheDroneNerd the bolts come all the way through from the motor mount to the motor
All good in the hood buddy actually matt, Did almost virtually the same mod to my bixler2 matt hope that you are keeping well m8 peace out cj. Oh n have you used the foxere wildfire yet?
howdy Christian, yea it works well. As for the Wildfire, yes! been working great. Sadly have issues with my goggles, so thats very annoying. No negatives to say about the WF though. Matt
@@RagTheNutsOff you got dom-v3 haven't you?..sure I had seen sum in a previous video...actually thinking about it ???I have a brand new pair in my stock room of goodys !!!...was thinking about getting the dji digital with a analogue adapter was just offered some for £400 including pnp...couple of weeks old and transferred warranty so if I was to go ahead and get them would have the dom-v3 for sale if that's any help to you Matt I am sure that we could work something out?..Actually would be great if there was a swap meet like the yanks have?? Food for thought?..peace out cjthedj77.
How does this plane cope with wind? Mostly gusts or wind rising up hills or mountains?
Hey Sam, pretty well. You need to watch the max cruise throttle in iNav for really strong winds as it will have issues with a 40mph headwind and trying to climb at the same time. Matt
@@RagTheNutsOff Thanks for the info Matt. I might look into one or get my Ranger 1600 going.
hi Matt which version of the Cadex starlight was it the one with the filter
Howdy Phil, the Caddx Ratel Starlight. I've not used the one with the filter. And there are two sizes, apparently the same sensor in both Phil, Matt
How are you mounting the motor to the standoffs? Are you using long bolts to go all they way through to the motor?
Howdy Will, 4 bolts in from the motor side and 4 bolts in from the mount side, thats all. To get at the motor mount, its just 2 bolts on the underside of the model. Hope that helps Will, Matt
@@RagTheNutsOff How are you getting the bolts into the standoffs from the motor side? The motor bell is wider than the mouting holes which blocks even getting bolts in there, let alone a driver. Super interested in doing this mod as I wish mine were a little quieter. Thanks, Matt!
@@brubakerjm Hmmm and still no answer from Matt, such a simple question yet no reply.
@@OzFPVflyer I ended up printing one of these (in PETG, not resin): www.thingiverse.com/thing:4586350
Behold! RTNO T-Shirt on the way! 'Bout time 🥳🎆👕
"10 Aug 04:00
The campaign has ended and your order is now being printed!"
I just got a mention about the foil happy dayz
What is the video tx you have installed in video?
Hey Bill, definitely not the Matek 1.3GHz module 😁
RagTheNutsOff Not a good choice?
after the mods - still below 250g?
Hey Tom, 196g before batteries and these mods. The foil would have added say 2g, the mounts a few more. Not much, but things will add up. Matt
Empty calories. Love that.
Hey Jim, its right though isn't it ;) Matt
@@RagTheNutsOff I heard there were 2 weights embedded in the front of the nose on the Dart 250, 40g. Did you know?
edit: never mind it was the full size Dart.
LOL The cat in a tin foil hat :)
hahahah indeed Lauren!
@ragthenutsoff I've been using this RF shield tape for a while on long range wings and I absolutely love it. It's a form of acetate tape as well so it's light, strong, easy to work with and..... doesn't look jenky AF like the foil does. :) www.amazon.com/TitanRF-Faraday-Tape-High-Shielding-Conductive/dp/B07CRLCGCH/