DIY Night Lamp using a piece of laminate | DIY Night light Project
Vložit
- čas přidán 7. 06. 2024
- Certainly! Here's a description for your video titled "DIY Night Light Project: Illuminate Your Nights with a Cube Light Made from Laminate Flooring":
Are you ready to transform your gaming room into an immersive haven of light and atmosphere? In this DIY Night Light Project, we'll show you how to create a stunning cube-shaped night light using a surprising material - laminate flooring!
Join us on this illuminating journey as we guide you through the step-by-step process of crafting your very own unique night light. Discover the secrets behind this creative and cost-effective solution to enhance your gaming setup's ambiance.
With easy-to-follow instructions and expert tips, you'll learn how to turn ordinary laminate flooring into a mesmerizing source of light that can set the perfect mood for your gaming sessions. Whether you're a seasoned gamer or just looking to add some style to your space, this DIY project is sure to spark your creativity and brighten your nights.
Don't miss out on this opportunity to level up your gaming room's aesthetics and create an inviting gaming environment that's as functional as it is beautiful. Illuminate your nights with our DIY Cube Night Light, and let the gaming adventures begin!
If you liked the video, please subscribe to my channel!👇👇👇👍
/ @ardodiy
Thanks!
more PVC pipe lightning projects 👇
🔴1. DIY Sconces From PVC • Home Decor Idea - Diy...
🔴2. DIY Chandelier From PVC • Home Decor Idea - DIY ...
🔴3. DIY Chandelier From PVC • Home Decor Idea - DIY ...
🔴4. DIY Night Lamp From PVC • Home Decor Idea - DIY ...
🔴5. DIY Sconces From PVC • Home Decor Idea - DIY ...
🔴6. Groot Night light From PVC • Homemade Groot Night l...
🔴7. DIY Sconces From PVC Pipe • Home Decor Idea - DIY ...
00:00 Video started
00:02 Short review
00:07 LET'S GET STARTED
00:10 Make markings on the laminate and cut out 5 identical parts
00:28 grind the ends at a 45 degree angle
01:19 cube assembly
01:40 measure the inside of the cube height and width,
and remember the dimensions
01:54 marking the lines on the cube
02:14 cut all the parts along the lines
02:32 lay out all the parts on the table so as not to get confused, you can mark them A, B, C, D, E
02:42 Glue the corner parts to each other
03:02 after gluing, if there is a difference between the parts, sand the difference
03:24 buy a 1mm thick LED diffuser sheet and make markings on it according to the size of the inner part of the cube
03:32 cut off all the parts and glue them to make a cube from LED diffuser sheet
04:11 cut a piece from a wooden board to the internal size of a LED diffuser sheet cube
04:20 mark the center of the wooden board
04:25 PVC pipe dimensions (diameter 1 inch height 12cm)
and glue the PVC pipe in the center
04:42 Glue the LED strip onto the PVC pipe
04:52 mark the location of the power supply for the LED strip
05:02 Make a hole for connecting the power cord
05:14 from the hole make a mark on the inner wooden board
05:25 glue the led strip power supply to the wooden board
05:37 You need to make marks on the two lower pieces and drill holes in order to secure the structure with self-tapping screws in the final assembly.
06:10 painting process
06:27 beginning of assembly
06:41 glue all the parts in place
07:12 fix the cube to a wooden board with screws
07:32 add felt Furniture pads
07:46 connect the cable and enjoy the result
08:12 Thanks for watching
#diy #nightlight #nightlamps #howtomake #diyprojects #ardodiy - Jak na to + styl
Классно! Спасибо)
Nice friends 👍
Thank you very much 😊
Nice one. Thanks 🙂
👋Appreciate it 🫡
👏🏽👏🏽
Thanks ✅️👊👍
Класс 👏👏👏👏🤌🤌
thanks
Классно! Спасибо)
Спасибо 👍👊✅️