you showed us that this can drill...ofcourse all drill can do their job.....but you forgot the million dollar question ......does the tool is in a right angle of 90 deg? That is I believe the purpose of having the drill press to drill at precisely 90 deg ....right?
Bad idea to not have clamps, a drill press vise or workholding of some kind, especially with sheet metal - if the bit grabs it at speed could slice fingers in a second.
When drilling wood your suppose to use higher speed and when drilling metal you use low speed, I noticed you had that backwards (i.e. you used high speed for drilling steel and low speed for drilling wood)
I'm reading these comments and can't decide that they are real or just bad jokes. Like "Amazing" What is so amazing to drill a few holes in Wood? In My opinion the only "Amazing" thing that, He was able to drill a hole on that sheetmetal with a WOOD drill bit.
This press has worked like a charm for my projects czcams.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
das kann meine 0815 Maschine aus der DDR auch, hat nur 120 DDR-Mark gekostet und ist seit 35 Jahren im Einsatz. Gute Maschine aus Schmalkalden. So gut wie B.o.s.c.h. allemal.
Plzz provide me another site for machines or objects need in project because it says about very long time from 7 to 35 days. So , plss provide another site
banggood is a credible chinese online shop. it is very safe to buy from them. the problem can be happened in your own country, with the customs (tax etc) or the delivery by the postal service that can be very long.
I love your talent and respect your talent , what use of buying this product when u have already made 3 diy bench drill , your made products are just for short time period ? I never saw you using your own made products during your projects u always use branded thinks .. Creative guys should use there own made things . don't feel bad about my comment . I respect your talent
WRONG. Look at his other videos. He sometimes uses his own made tools to create something else. This video called "unboxing" or "review". He intended to show the function, quality or how to use a product that available on the market. His videos are not always about "create" something. CZcams is a business. He's probably running out of ideas about creating something at this moment so he made this test/unboxing/review video. He is still getting viewers, and money from this.
BUYER BEWARE: Some vendors sale this drill with a 220 Volt AC motor with 110 Volt AC plug. On 110 Volts AC it only runs at about 1/3 speed and you can hold the chuck with your bare hand.
It's a Chinese domestic plug, which is the same as the US plug, but it's a 220VAC system. They're indeed all like this, I got mine at the flea market. You can hook it to a US 220V line (at your own risk of course).
you showed us that this can drill...ofcourse all drill can do their job.....but you forgot the million dollar question ......does the tool is in a right angle of 90 deg? That is I believe the purpose of having the drill press to drill at precisely 90 deg ....right?
I love this channel I like most you making💗💗👍👍✌✌
Is that a 2 pin US plug?
Given the plug is symmetrical, can I assume it does matter which way around it is plugged in?
You deserves 10 M subscribers
You can clearly hear it's totally underpowerd. hummm too bad I wanted one like this.
Интересно.Что в нутри этого сверлильного станка?Спасибо!Классный канал!COOL!!!NICE...!!!
Bad idea to not have clamps, a drill press vise or workholding of some kind, especially with sheet metal - if the bit grabs it at speed could slice fingers in a second.
It's great 🤩
Is it really 710w . After useing it did you realy find it a powerfull . Do you advice me to buy one ??
Thank you
vc gostou da maquina ?
Wow, very very nice
Amazing
I love this channel 😍😍😙😘😚
Amazing knowledge
I subscribed your channel pls sub back to me, I am waiting.
Trying To Make okk
When drilling wood your suppose to use higher speed and when drilling metal you use low speed, I noticed you had that backwards (i.e. you used high speed for drilling steel and low speed for drilling wood)
also depends on the size of the bit.....generally smaller bit require higher speeds
Wow... Really nice!
Hi. How is the drill holding up?
Very good
Is it drill a 10mm thickness metal
have fun with it
From which sight u bought it . How much you have spent on this
I'm reading these comments and can't decide that they are real or just bad jokes. Like "Amazing" What is so amazing to drill a few holes in Wood? In My opinion the only "Amazing" thing that, He was able to drill a hole on that sheetmetal with a WOOD drill bit.
Plastic works as well?
Bro super
This press has worked like a charm for my projects czcams.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
Can it drill duralumin
Which camera do you have ?
perfect
Nice brother
can fit 1mm drill bit?
👍
Awesome
Very nice
Merci pour votre creiative
Vey nice.
nice////////
Nice...
So smart....
whats the man drill bit?
das kann meine 0815 Maschine aus der DDR auch, hat nur 120 DDR-Mark gekostet und ist seit 35 Jahren im Einsatz. Gute Maschine aus Schmalkalden. So gut wie B.o.s.c.h. allemal.
Hey bro please tell me how to make a magnetic gymnast toy ?
Mantappp...
How much did Banggood pay you?
How much you got it ?
good
Nise
its good
sub for sub
Plzz provide me another site for machines or objects need in project because it says about very long time from 7 to 35 days.
So , plss provide another site
Wow listen to that thing bog down on even a small hole in wood... _premo Chinesium!_
is it made in taiwan ?
How to make a soldering station
Beli dimana dan harga brp
Preciso de uma desta pro que eu quero é excelente
I like
Good
I subscribed your channel pls sub back to me, I am waiting
You have the money
Please make subwoofer
Please... How many r.p.m.??? Thanks
Glass hole work
canyou make it ni home
Супер
wow its
good for pcbs
Quick Look n Teardown I
Не плохо, совсем не плохо!
Только станина лёгкая, надо к верстаку крепить.
Can order switch board
How price ?
Did banggood is safe to buy from India please tell me because I want a product from it
banggood is a credible chinese online shop. it is very safe to buy from them.
the problem can be happened in your own country, with the customs (tax etc) or the delivery by the postal service that can be very long.
How to price in india
Wow this is 4k + unit price but nice
Who to make a 3d pen at home
What happened to the PVC pipes : )
Please make air room cooler
Why can't you buy the traxxas
make a led cheser bord ic namber 12f629 please make request
Barapa harganya bosses...
I love your talent and respect your talent , what use of buying this product when u have already made 3 diy bench drill , your made products are just for short time period ?
I never saw you using your own made products during your projects u always use branded thinks ..
Creative guys should use there own made things . don't feel bad about my comment . I respect your talent
WRONG. Look at his other videos. He sometimes uses his own made tools to create something else.
This video called "unboxing" or "review". He intended to show the function, quality or how to use a product that available on the market.
His videos are not always about "create" something.
CZcams is a business. He's probably running out of ideas about creating something at this moment so he made this test/unboxing/review video.
He is still getting viewers, and money from this.
Hmm got it .
IS REAL.
How much piraij
I need u to show us how to make cooker induction plz try to reply me
Not really for USA use unless you want to run 220v line for it.
Eu fui o 1°br de hoje a comentar
how money
electric 220 or 120v?
220 Volts at 50 HZ.
On 110 Volts at 60 Hz it only runs at one third speed and has NO torque.
Price
BUYER BEWARE:
Some vendors sale this drill with a 220 Volt AC motor with 110 Volt AC plug.
On 110 Volts AC it only runs at about 1/3 speed and you can hold the chuck with your bare hand.
It's a Chinese domestic plug, which is the same as the US plug, but it's a 220VAC system. They're indeed all like this, I got mine at the flea market. You can hook it to a US 220V line (at your own risk of course).
What is the name of music at 4:26
Indian gamer pro darude sandstorm
Hola
Can u please make waterproof water pump
Cost it🤑 56.45 zł what
Make the rc drift car pllzzz
its just a core drill that cut in half....
what is price in india
Alikhan Alikhan Rs9,150.55
या मशीनचा संपर्क द्या
55 view, 8 like, 6 comment
นึกว่าจะสอนประดิษฐ์
You are so rich man 🤑💸💵💴💶💰💳
Bro pllzz rc drift car
How price in China
130€
300 rmb,about $50 us if you bought in China
Descartable
Ilk
O frete para importar para o Brasil tá custando o mesmo preço da máquina, tudo pro brasileiro é mais difício, por isso o Brasil não vai pra frente 👎👎