The traxxas kit is so nice done that I have gone for that. I don´t like holes in this nice boddy . I like when you brake and brake lights are on or the back lights etc But the bar light ... cool but the hole is what takes me out.
That's fair enough 👍 I didn't want to pay so much for the traxxas light kit. The main thing I don't like about this Injora kit is the lights shining through the body. 👍
Well that should certainly light up the path! I think I will have to grab the light kit for mine as well!! The best thing about these lights... no turn signals!! LOL! Those blinkers on the trails drives me batty! It looks really good with the roof bar on it as well. Thanks for sharing and at least this time it didn't cost me much!
🤣🤣🤣 It can be an expensive hobby can't it! 😬 That's what I like about the mini crawlers, everything is cheaper. 👍 Yeah I can't stand the indicators either, I don't get why you want to indicate every time you turn your wheels! 🤣🤦 I think the only downside is the body is so thin on the Defender, so the rear lights shine through the body too. If I did it again, I think I'd just make a hole in the light sticker, leave the rest of the sticker in place, see if that helps. 👍
Rob, it's interesting to see the comparison of the Injora kit to the Traxxas version that we have. Seems both are fiddly to fit as everything is tiny!😄 Of course now June fancies a light bar to match her 1/10th version, and possibly some white letters on the tyres! I like some of your stickers - 1/18th versions or just small 1/10ths? I've just a done a little (rather rushed) video of ours, showing the "luggage" I made. I found I needed to add the spring collars that came with the cars to the rear springs once the luggage was installed. (No instructions suppled there at all - but they fit at the bottom of the spring, one way up only!🙄)
Yeah if you've got sausage butter fingers like me, it's fun and games. Think I need magnet fingers! 🤣 🤣 On the light bar! Sorry! 😬 They do look cool with the light bar though. 👍 Yeah the stickers I got off ebay, just search up 1/18 crawler stickers and there were two sets. 👍 Thanks for the tip, I'll take a look at that, as I'll be adding lots of accessories soon. I'm just holding off until I've done some other rig comparisons first. 👍
@@DoURC I looked at the Injora light bar..... Now I'm wondering if that would plug into the connection for the stock bumper lights, and use the Y cable for that plug. I doubt it would work in the Pro Scale Light socket as that has the "fancy" stuff going on..... Now, where's that magnifying glass😄
@@DoURC Rob, fitted the Injora light bar to June's TRX4M yesterday, using the bumper plug with the Y cable. Install went very nicely, thanks to having seen your doing it first! 👍 Like all Injora stuff, a nice piece of kit. We also added their black painted brass diff covers (front only) and steering rods, which does actually make a difference to climbing ability. And, with the light bar and the Traxxas lighting kit I think June's rig can now been seen from the Space Station!😄
@S and J Adventures 🤣 Excellent, at least you won't lose it when it's powered on! 👍 Good to know on the brass too, I've got a load of upgrades sat in a box once I get around to it. 👍
Thanks very much, appreciate it. 👍😎 I quite like the stock spot lights tbh on the LC80, so will leave them as they are. I've got some other upgrade videos on my LC80's and free mods in my Mini Crawlers playlist 👍
The roof bar light comes with a Y cable, so you just connect both lights to the Y cable, then plug the Y cable into the ESC, sorted. 👍 Just like any normal receiver tbh, you can run multiple outputs from the same port using Y cables. 👍 Pretty sure I said it in the video. 👍
I got an injora 4 round light, light bar. What's the best way to run the wire through the roof? How can I take off the plug or should i cut them then reattach?
I made a little hole in the roof with a reamer. You can de-pin the plug with a sharp knife, just life the tabs, pop the wires out, run them through the roof and plug them back in. 👍
@@DoURC thanks, I will have to try that first thing tomorrow.it'll really be bright. Just added 62 grams of brass boulder bars and definitely not top heavy anymore. Love the video and with that last tip I should be up and running
@DoURC well it's installed and working! With the wife's eyes and a Dremmel made it work way better than I expected! Thanks to your video and advice, things went perfectly, I thank you again!
When the light turns on, the fun spreads💡👍😆🎶
🤣 Yeah, definitely gives it more character. 👍
@@DoURC 🎶👍
Now you can drive uderwater in the dark 😂
🤣🤣🤣 That's an awesome idea! 🤔🤣👍
Looks awesome! 💯
Thanks very much mate. 👍
The traxxas kit is so nice done that I have gone for that. I don´t like holes in this nice boddy . I like when you brake and brake lights are on or the back lights etc But the bar light ... cool but the hole is what takes me out.
That's fair enough 👍
I didn't want to pay so much for the traxxas light kit. The main thing I don't like about this Injora kit is the lights shining through the body. 👍
Well that should certainly light up the path! I think I will have to grab the light kit for mine as well!! The best thing about these lights... no turn signals!! LOL! Those blinkers on the trails drives me batty! It looks really good with the roof bar on it as well. Thanks for sharing and at least this time it didn't cost me much!
🤣🤣🤣 It can be an expensive hobby can't it! 😬
That's what I like about the mini crawlers, everything is cheaper. 👍
Yeah I can't stand the indicators either, I don't get why you want to indicate every time you turn your wheels! 🤣🤦
I think the only downside is the body is so thin on the Defender, so the rear lights shine through the body too. If I did it again, I think I'd just make a hole in the light sticker, leave the rest of the sticker in place, see if that helps. 👍
Nice job with the lights.👍👍
Thanks very much 👍
Rob, it's interesting to see the comparison of the Injora kit to the Traxxas version that we have. Seems both are fiddly to fit as everything is tiny!😄 Of course now June fancies a light bar to match her 1/10th version, and possibly some white letters on the tyres! I like some of your stickers - 1/18th versions or just small 1/10ths? I've just a done a little (rather rushed) video of ours, showing the "luggage" I made. I found I needed to add the spring collars that came with the cars to the rear springs once the luggage was installed. (No instructions suppled there at all - but they fit at the bottom of the spring, one way up only!🙄)
Yeah if you've got sausage butter fingers like me, it's fun and games. Think I need magnet fingers! 🤣
🤣 On the light bar! Sorry! 😬
They do look cool with the light bar though. 👍
Yeah the stickers I got off ebay, just search up 1/18 crawler stickers and there were two sets. 👍
Thanks for the tip, I'll take a look at that, as I'll be adding lots of accessories soon. I'm just holding off until I've done some other rig comparisons first. 👍
@@DoURC I looked at the Injora light bar..... Now I'm wondering if that would plug into the connection for the stock bumper lights, and use the Y cable for that plug. I doubt it would work in the Pro Scale Light socket as that has the "fancy" stuff going on..... Now, where's that magnifying glass😄
@S and J Adventures Yeah I would think so, as its just a light channel, be the same as how I've connected mine to the spare port. 👍
@@DoURC Rob, fitted the Injora light bar to June's TRX4M yesterday, using the bumper plug with the Y cable. Install went very nicely, thanks to having seen your doing it first! 👍 Like all Injora stuff, a nice piece of kit. We also added their black painted brass diff covers (front only) and steering rods, which does actually make a difference to climbing ability. And, with the light bar and the Traxxas lighting kit I think June's rig can now been seen from the Space Station!😄
@S and J Adventures 🤣 Excellent, at least you won't lose it when it's powered on! 👍
Good to know on the brass too, I've got a load of upgrades sat in a box once I get around to it. 👍
Greetings mate! awesome light kit. Any chance I’ll be able to use this kit for my fcx18 lc80?
Not sure tbh, you'd have to check the size and they use different connectors too iirc. 👍
Thanks! Thank you! Would you be doing a light kit intall on your lc80 in the future?
Thanks very much, appreciate it. 👍😎
I quite like the stock spot lights tbh on the LC80, so will leave them as they are. I've got some other upgrade videos on my LC80's and free mods in my Mini Crawlers playlist 👍
@@DoURC Awesome mate! Much love from New Zealand. Keep the videos coming brotha!🫡
@Lonewolf00003 Thanks very much mate, will do. 👍😎
Hi Rob! excellent video! I have a question: Where did you get the stickers on your Land Rover (windows and doors)? Thank you for the advise
Thanks very much, glad you enjoyed it. 👍
I got them off ebay, just search up 1/18 crawler stickers. I got my 1/10 ones off ebay too. 👍
How were you able to put three lights? Because the ecm only has two plugs you can do meaning only two lights.
The roof bar light comes with a Y cable, so you just connect both lights to the Y cable, then plug the Y cable into the ESC, sorted. 👍
Just like any normal receiver tbh, you can run multiple outputs from the same port using Y cables. 👍
Pretty sure I said it in the video. 👍
Hi bud, can the lights be turn off from the remote control?
No, they're always on when you plug them in. There's no third channel control on the stock transmitter. 👍
I got an injora 4 round light, light bar. What's the best way to run the wire through the roof? How can I take off the plug or should i cut them then reattach?
I made a little hole in the roof with a reamer. You can de-pin the plug with a sharp knife, just life the tabs, pop the wires out, run them through the roof and plug them back in. 👍
@@DoURC thanks, I will have to try that first thing tomorrow.it'll really be bright. Just added 62 grams of brass boulder bars and definitely not top heavy anymore. Love the video and with that last tip I should be up and running
@@stephant3665 Excellent and no problem at all, happy to help. 👍
@DoURC well it's installed and working! With the wife's eyes and a Dremmel made it work way better than I expected! Thanks to your video and advice, things went perfectly, I thank you again!
@stephant3665 Excellent, glad you got it installed and happy to help. 👍
👋😁 Nice sharing my friend 👏 👍 ✌️
Thanks very much mate 👍
where did you find the splitter for the lights
It came with the light bar from Injora. 👍
Tires traxxas
? Where do you find theme
Check out Injora website 👍