Few people have seen this method of woodworking!
Vložit
- čas přidán 13. 04. 2024
- Good afternoon friends!!!
My name is Alexander, on my channel you will see many interesting solutions for creating a tool with your own hands at home!
Subscribe to the channel, it will be interesting!
INSTAGRAM / master___sh
Hello friends!👋If you liked the video, support it with a like and a subscription! Thanks!👍
You're right, I've never seen woodworking like that. What I HAVE seen is a whole lot less complicated, and gives the same results.
Ok thanks 🫣
Классный станочек!!!? Можно быстро изготавливать хорошие вещи из дерева!!!! Мастеру жирный лайк!!!
Огромное спасибо Анатолий 👍
Очередное качественное видео!!! Молодец!!! ЖИРНЫЙ ЛАЙК!!!😊
Приветствую 👋Огромное спасибо Шеф 🤝🫡
Espetacular, Belo trabalho!👏👏👏
Obrigado amigo 🤝
Thank you, great video. It never occurred to me to do that with a handheld saw, that makes it very portable, witch I require sometimes.
Again thanks for all the great videos you produce.
Hello 👋 Thank you so much friend 😊
Excellent, super!! ❤❤❤❤
Thank you 👋
Buena idea y bien hecho. Te felicito 👏👏😉
Hola, muchas gracias 🤝🫡
Awesome idea.
Thank you bro 👍
Muito bom, bem criativo!!!👏😀👋
Obrigado amigo 👍😊
Bendiciones, brillante idea, te felicito colega
Thank you my friend 👍
Muy bueno el video como siempre!! Eres un genio!!
Hola, muchas gracias 🤝
Nunca desentonan tus videos siempre tenes algo interesante para ver!
🤝🫡
Buy a lathe!
This is not an online store, but a channel about homemade crafts with your own hands🤲
A bought lathe wouldn't have gotten him this many views or the pleasure of making one.
Good job friend beautifully done
Hi 👋 Thank you my friend 🫡
Interesting idea but good example of dangerous work without the use of protective sticks.
Thank you bro 👍
Terimakasih sudah berbagi,
Halo sahabat, saling 🫡
There is nothing "new" in this video except for soem dude using a table saw incorrectly.
Ok thanks
Bravo job 👍
Thank you 🤝
Круто.Респект мастеру
Благодарю Николай 🤝
Fantastic very good BRASIL
Thank you my friend 👍
Great.
Work with what you have.
Subscribed
Hello, thank you so much bro 👍
This is a great idea, much faster than a conventional lathe, and also enabling a consistent size and taper from one leg to the next. One could always make them fancier by then using traditional turning tools.
That's right, friend! Thank you very much 👍
THAT IS AN EXCELLENT TOOL YOU MAKE IT LOOK SO EASY
Thank you my friend 👍
yes.. it's called a lathe!
@@cgmejia well not like a lathe I know this is different
😊👍
🫣
oh , super , wieder ein wunderschönes gerät , ganz liebe grüße aus deutschlandet dir waldemar , nu geh ich auch erstmal in die werkstatt , basteln
Danke, es ist immer eine gute Idee, ein Lieblingshobby zu machen😊
There is a reason you have not seen someone do this before.
🫡
PUT THE DAMN GUARD ON THAT SAW BLADE!!! YOU'RE MAKING MY FINGERS TWITCH!
Ok thanks
also the table saw doesn't have an height adjustment for the blade ?
@@bmallory there is
I see SO many people do this. Is it really worth the risk of cutting a finger or hand off?!
@@angiemanges7945 You shouldn't even get up from the couch in case you twist your leg, it's dangerous😱
That's some sketchy freestyle table-sawing. I cant watch anymore. You cannot run a 8 inch wide board that 4 inches long in between the fence and the saw blade.
Thanks 🙌
MM77 Approved 👍🏼👍🏼
Thank you bro 👍
Awesome:)))
Thank you 🫡
Saw blade to high!
A good disk
blade is way too high for the cuts.
Ok, thanks
1. Use a push-stick
2. You push the wood on the wrong side
OK thanks
You should have your blade 1/8" only over your board thickness, I have seen lots of serious injuries and lost fingers.
Ok, thanks bro 👍
If you have a router you could adapt it to make it a router-lathe. A genuine suggestion!
Ok, thank you 👍
Blade too high!
I did it without preparation the first time! That's why the blade is where it needs to be 😉
Nice ❤️
🫡
Uralte Idee..gab es hier schon oft.
Wenn Sie es gesehen haben, bedeutet das nicht, dass jeder es gesehen hat!
Izzy Swan did this several years ago.
Ok, thanks
genius
Thank you
superbe
😉
Merci 👍
Here we go again, ‘few people etc’ maybe they are just not interested
👍
Здравствуйте Александр!🤝воистину неисчерпаемы ваши идеи,лайк 👍!хороший станок.я пока остановил работы с деревом,металлом,начался огородный сезон.теперь только необходимый ремонт.бензопилу разобрал сальники поменять и руки не доходят собрать теперь😅.правда занялся,сконструировал и сделал самозасасываюший насос,у меня в огороде старая скважина,узкая,обратный клапан не проходит,вот сделал из огнетушителя и циркуляционного насоса свою конструкцию.
Здравствуйте Владимир 🤝Огромное спасибо! В своём доме всегда дел не мерено 😁 Вчера тестю тоже купили бензопилу новую , старую уже не отремонтировать!
Както сложно но неплохо
@@MA-SH хороший подарок тестю!👍
@@MA-SH я подумывал о новой,но нет,решил поремонтировать,ради опыта и умозрительного интереса
Да не) он сам купил, я помог с выбором 😁
Metode yang luar biasa
Good method 👍
swietny zartz tym toczeniem pilą
👍
Looks like a cool way to make baseball bats.
Thank you 😁
Very unsafe person. No guard on blade, use a push rod instead of fingers, hand. Not to bright.
Yes blade is way to high
the moment of the saw was accelerated several times, what you think is dangerous was very slow and safe, but I will not get tired of writing this to everyone who will point it out to me
You shouldn't be pushing the wood through the table saw like that. It's too dangerous. If you think your hands are far enough away to be safe you're wrong.
Ok, thank you bro 🤝
Хороший вариант.
Благодарю 👍
Отличное приспособление. Жаль, что автор не видел никогда бейсбольной биты
Спасибо, почему вы так подумали)) я когда делал эту ногу подумал что можно сделать и биту таким образом
Привет от Доктора Дью))))
Он тебя уже вылечил, рано рано
👍👍👍
Огромное спасибо 😊
👏👏👍класс!
Благодарю 🤝
Or you could just buy a lathe--maybe an old Shop Smith.
Ok thanks
А какова поверхность после такой обработки? Подозреваю, что сильно рваная, даже шлифовка не полностью скрывает дефекты. Мне кажется, лучше было бы использовать вместо циркулярки фрезер с пазовой фрезой, и подводить фрезу не сверху торцом, а боком, к заготовке
Сразу грубо, требует шлифовки! Можно фрезером
Здравствуйте. Смотрю в последних самоделках используйте в основном ДВП, клееное дерево меньше.
Здравствуйте, это МДФ ! Фанера очень дорогая, этот материал подлога от паллет с ламинатом , покупаю за копейки в строительном магазине!
@@MA-SH Да фанера сейчас стоит космически.
Нога для пирата, надо было её сделать полую чтобы ром туда заливать!
Хорошая идея 🍾
Sen bunlari nerden ogrendin?
CZcams
Здоров напишите название циркулярки!
Здравствуйте, спасибо!АККУМУЛЯТОРНАЯ РУЧНАЯ ДИСКОВАЯ ПИЛА METABO KS 18 LTX 57
Now a lot of people saw it.
That's for sure)
Обычные токарные станки, на сегодня уже безбожно устарели.
Тут многие пишут, как вижу в кадре токарный станок сразу выключаю видео, вы пишите это😂
What could possabley go wrong. Buy a laith
👍
Ustacım şu tutkalı doğru dürüst yay burada bizi de komaya sokma
🫣
You are incredibly unsafe dude.
🫣
Вообще то весь ЮТУБ забит этим методом а вот фиксация кнопки при помощи зажима прищепки оригинально ну по крайней мере для меня
Ну вот видите , хоть что-то для вас прошло с пользой 👍
@@MA-SH 🛠🛠🛠⚡
I think I'd rather use a lathe.
Thank you
Are there drawings available for this project?
Hello, all my homemade crafts are improvisation, and all sizes need to be adjusted to the saw that you have
😊
🫡
Where is the guard for the saw ???
🤷
hallo , alexander
Hallo, Waldemar👋
Wat ben jij toch blij zeker dat jij een van bent😂
🫣
And...what is it??
You don't understand
Why cry? For part-time enthusiasts like me, any cost saver is what I tend to make. Can't see the need for expensive tools to be white elephants to be used on a bi monthly basis. Rather applaud for simple designs to make. Unless you want to sponsor a cordless lathe. Small shop with cordless tools. Here in South Africa tools are expensive. 1 USD to R20 on any given day. Import costs, mark-up etc. As an end user, I definitely cut costs. Regards.
Thanks buddy
I regret ever clicking on this video. What a waste of my time. This is so janky
Thank you bro 😎
All the negative commenters and safety Karen's/Kevin's or armchair bots have no idea or are simply triggered by this guy's initiative and obvious expertise that eliminates risk through repetition and common sense.
I doubt any of you could link his audience into your uploads!
Thanks friend 👍
То было "в любой непонятной ситуации необходимо приварить подшипник"
Теперь, в любой непонятной ситуации необходимо приклеить подшипник "
Как вы достали сраные изобретатели
Кому ты нужен доставать тебя!
@@MA-SH, ой ой, какие мы обидчивые...
@@vanosuhov2934 кто тебе сказал что я обиделся? На обиженных воду возят, так иди вози👍
@@MA-SH , не забыл ещё ... Ну так там начало есть, могу прислать парочку к вам !!!
Жду видео где подшипник привариваешь, а пока с приклеиванием видео отправляется к доктору... Так что терпение мой заокеанский злейший друг, всё будет. Ложись спать утро вечера... дальше сам знаешь!
Полулях Саша, это ты что ли, сбежал?! Ай молодец! Доктор будет рад!
@@vanosuhov2934 Доктор скорее тебе нужен 🤭
Why oh why would you waste so much time on that ?
And what do you spend your time on? To view these videos and your comments?
There is either time, or money. Each has different values to every one of us. Those with money would have a lathe. Those with time would build a clever jig like this one. Personally, I find that building jigs is at the high end of creativity, and I have a wall full of them. Some I use often. Some I look at and wonder just what in the hell I tried to accomplish. 😂
@@woodrowsmith3400 😁Thank you bro
I agree. Time and Money are not the only variables here. Creativity, Joy, Pride, Contentment, Service, Friendship. Furthermore, more energy and materials go into building a commercial lathe compared to this home grown version. Good on you! Thanks for the video.
@@calowaykagan Thank you
фантастический накал идиотии
😱
this guy doesn't know how to use a tablesaw. The blade should be set just a little above the piece being ripped
Ok
With good reason
🤷
@@MA-SH You were cutting pieces with no rear table support. You used no push stick. I would stop someone in my shop right there. Thus my response. I would like to see more emphasis on safety on You tube videos considering the fact that entry level woodworkers may be watching...Not trying to run you but I added my educated response..
@@englewood1957 Ok, thanks bro 🤝
👍👍👍
Благодарю 👍