ARDEX WA Epoxy Grout and Adhesive 1: Proper Mixing and Application
Vložit
- čas přidán 31. 01. 2016
- Part one:
This video will show the correct process for mixing and applying ARDEX WA Epoxy Grout and Adhesive.
ARDEX WA Epoxy Grout Product Details: www.ardexamericas.com/en-us/Pr...
ARDEX WA Epoxy Grout Tech Data:
www.ardexamericas.com/en-us/Do...
will this product work on movable surfaces, like a trailer trailer?
Thank you, but to me, it seems a little wasteful to spread that grout all over the floor. Could you have taken a little and applied it more directly to the seams themselves? Is there a reason behind spreading it so liberally over the floor then wiping it all away?
Absolutely there is a reason. If there is any sort of etching or staining no matter how subtle and you just hit the joints without spreading the entire material you will see a very faint shadow of the areas that were full spread versus the areas that were not. These tiles or 6 x 6 so not only would you be wasting time trying to just hit all the joints but you would do yourself a disservice with the possibility of some level of staining or discoloration after-the-fact.
+Vernon Vie Ok, that make sense, thank you.
Bro, good try but always have little training and practice your presentation before turning the camera on. 👍
Just used the small container for grouting. It’s the thickest thing that I’ve ever used! Wasted half the container because it hardened to fast! Do not like this stuff!!! Had about 35 minutes of working time! Temperature in the low 70’s