How To Pass a Difficult Corner With a Ceiling Plinth! Few People Know The Tricks of Such Angles
Vložit
- čas přidán 21. 07. 2022
- In this video, we showed you how to properly create corner problems that are common in the work process. Find what you need from these tips and '' Create the perfect corner every time ''
Respect pt astfel de meseriași
Buenos consejos gracias
Thank you for sharing.
You don't need that 3rd piece. You can make them meet correctly one board to the other.
I'm not expert but when I get to an odd corner or something is out of square,I use a profile gauge!
Hammer! Echt Klasse
I want a spring angle of all the crown molding on all the walls to be 45-deg. The creates a gap between the ceiling and the top edge of the crown molding on the sloped sides of the room. I'm planning to put LED accent lighting that will shine up from behind through the gap between the crown molding created instead of laying it back. I think I can adapt this technique to work, but it's (at least) a starting point.
Thanks for leaving your thoughts in the comments!
Genial
Trabajo
Have a happy New Year!
Great geometry skills. You make it look easy! But a beginner would struggle forever. Its difficult to get good and fast at something you don't do every day.
I've been a Finish Carpenter for 21yrs I have a $1,000 set up just the saw alone was $850 at the time installed miles of crown,base and various types of mouldings layered or unlayered and I've never seen any guy do this. You have to be good at math to do it right among other things.
this is the worst way any1 could have done this
@@johns9543 they're not bad for a green horn at first, But after that well...
Bruh you need a new hobby.
Jp I think he's really BAD at math that's why he is doing it this way. Any rookie trim carpenter knows this is incorrect you don't need the 3rd piece. After 21 years you should know this
@randymarsh8324 3rd piece is like a bulnose or self return. It adds additional depth the the corner and would require more effort to make. It's not mitering and beveling 1 cut per crown; your doubling your cuts which requires more skill because any error made is compounded by 4 instead of 2
SUPER , BRAVO , OK !!!
Great presentation. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.
Perfect! 😀👍
Thanks for leaving your thoughts in the comments!
These are not for any contructors. They are meant for Michalangelo level only. Amazing
Thanks for leaving your thoughts in the comments!
THANKS 🙌🙌🙌✌✌✌🌟🌟🌟🌟🌟
How about just build the room right in the first place?
Legal conseguiu mais não precisava disso tudo e o acabamento podia fica melhor
Well when your up against the wall then you need clever solution just like in this case
Fantastic work.
Thank God YT made the “Do Not Recommend Channel” option!
al principio no entendi, al final tan poco
Holy Overcomplicating, Batman!😳
9/10 people being shown your renovation [within 10seconds of entering the room]...
🤔 “umm....did y’all install the crown moulding like that on purpose?”🤨
To You tube :
when you start showing your suggestions for other videos right BEFORE the one playing is finished ,you get on the way of viewing the end part of the video.
I hope i explained my self.
The exact same thing annoyed me so I did some research: youtube puts those suggestions and there is NOTHING you can do to get rid of them lol. You'd need to download the video and watch it on your harddrive to see whats beneath 😂
Can I ask(ik I can) why not one piece at a time??
Thanks for leaving your thoughts in the comments!
Absolute cowboy 😂
why couldn't we learn stuff like this in math/shop class?
Pure dolphin 06
First step:
Change your contractor.
Te fuiste en raya hermano...jjj
Этот метод был продемонстрирован давно Шайтером Андреем
Нет. Не так. Да оно тупо содрано. Только гипс зелёного цвета)
3 cuts to make that with 2 pieces of wood
le mieux c'est de faire du bon boulot avant avec le placo !
1год будет делать умник
As someone that does this kind of work that's not how to do it
👍🏻💯💡🇨🇺
Thanks for leaving your thoughts in the comments
Just to do this cut ,so much math 😳it has to be an other way
Мастера гипс крутили.
Spoko sprawdza sie, ale stosując ten sposób na co dzień nie zarobił bym na bułkę😃
You expect me to draw with pencil on my fresh painted walls?
Я понял .что ничего не понял
The angles meet yes but it does not look correct
Thanks for leaving your thoughts in the comments!
Don't do this people.. learn your angles.. get a good saw
Thank you. Yes, this person in the video doesn't know his deal, but it looks terrible.
Make a video maybe then say something
Not following the roof line. Looks bad. Great math and execution but does not pass the consumer eye test.
I think I would fix the wall. Why put crown molding on a screwed up wall. It's like putting lipstick on a pig.
The wall might not be messed up. This might be the ceiling in a stairwell or a loft. Not everything is built like a box.
Pardon the pun but when you cut corners things are meant to be easier.
Seems to be a lot of effort to incorrectly do the job.
Какого хрена потолок по отношению к стене не 90°?
Мансард бро
Absolutely not! You only need one miter. Also the molding piece needs to be pitched out and away and not tight up against the wall for that profile unless my eyes are playing tricks on me. You can hand saw it but his jig needs to be at the correct pitch and correct angle. And if your not doing trim behind excellent framers and drywallers or its an older house where the ceiling has settled and the walls are racked out of plum than perfect 90 degree corners are rare. You’d want and adjustable jig where you could change the angle on all axis’s and the pitch ever so slightly when your cutting your crown. If your off on any axis by more than a tenth of a degree it won’t be tight. I recommend a digital angle finder with long arms and a small one too. A Miter saw with a sharp blade goes a long way.
Thanks for leaving your thoughts in the comments
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Интересно, этот болван в конце понял, что за шнягу слепил, хотя, если ролик есть, значит не понял😄😄🤦♂️
Wow that's completely wrong you don't need the 3rd piece, just need to learn your angels
U priming ? lol
Está mal hecho
Yuck, you can twist and boom
Please do not do this, this is not the correct way.
Wft never seen that big if a crap in my life
Lost me on this one.
Ахахахаах, вот что делает болонская система животворящая, почитай про катеты и гипотинузу😂
No entiendo ingles
Лучше заново Велосипед изобрёл бы я бы больше удивлялся бы😁
C'est dégueulasse
Way to much time wasted
haha, by the time he is doing this crap, I would have joined.
Yav arkadaş bukadar ne uğraşıyorsun sanki nükleer santral projesi ciziyorsun koy köşe biraz ondan biraz ondan ayarlıyana kadar kes işte
3rd piece look ugly no professional..
Have a happy New Year!
That looks like shit
it is
Это убожество того не стоило