Upgraded version of the circular saw slide guide for tabletop

The bottom part where the circular saw blade hits and the vertical guide part can be replaced.
This is very effective when cutting using the line where the circular saw blade has passed, which deteriorates with use, as a guide.
It is also effective when using circular saw blades of different thicknesses.
The slide unit allows stable and precise cutting.
By replacing the interchangeable bottom plate with a high one, it can also be used for 45-degree cuts.
Material
Circular saw Blade diameter 125mm
Aluminum frame 20x20x600mm
Aluminum frame 20x40x50mm
Angle bracket
Aluminum angle 15x15x3x1000mm
Stainless steel rod 600x12Φmm
Shaft support (shaft guide) 12Φmm
Slide unit (slide block) 12Φmm
MDF material
Plywood
*Please search the above names on your country's search site for how to purchase each material.
*Drawings are not published or sold.
Size
Overall: 600x300x120mm (excluding circular saw)
Circular saw blade diameter:125mm
Cutting length:300mm
Cutting length (45 degrees):300mm
Cutting thickness:30mm
Cutting thickness(45 degree):20mm

[@kkrzysztof6886]

Cool! This is the only design that allows you to cut lengthwise at an angle (the other table top). All the others do not have this option. You're the best!

[@kenmanbo9103]

1年ほど前に初めて丸ノコを買い、前Verの丸のこガイドを作成させていただきました。大いに活用しています。以来手鋸がいらなくなりました。今回、刃のあたる部分の交換が可能ということなので、さっそく設計図に落としています。また、ベニヤ9mmと5.5mmを積層しなくてよくなったので助かります。いつもありがとうございます。今後も大いに期待しています。

[@crossgrainwoodproductsltd9230]

This is an awesome small parts cross cur jig. I only have a 16ft x 10ft shop space and though I have a small Dewalt dw745 tablesaw I also wanted a circular saw crosscut jig. Only I super-sized mine to be 7ft long. I wanted a full 8.5ft so I could breakdown sheet goods, but I couldn't find the supported linear rail I needed for my set up. But this 7.5 ft one works awesome. I barely us thetablesaw anymore with a radial arm saw set up with a dado stack, and the jig, they take care of all of my cutting needs. When not in use, it is hoisted up to just below the cross members in my shop.
I love your creative mind!!

[@keupondestroy911]

Elles sont super les vidéos merci beaucoup

[@saramgoncalves]

Awesome!!!

[@alexznidarsic9707]

In case you are wandering,,,,!? I have watched all of your videos and I just love your imagination and ingenuity. As a bonus your attention to detail and cleanliness is awesome. Please do not stop making these videos, However........if you ever wandered why you have such a low number in subscribers and especially "likes, my take on this is that most DIY guys usually work within extremely low budget out of necessity. Your use of high end gadgets will, in my opinion put them off. Case in point, this particular project would be well beyond the scope of an average person. Just the linear bearings , rods and T guides would be way too expensive to invest in, If you come up with alternate solutions that will not brake the bank, I believe your audience will grow exponentially, Now, saying all this, if you do not care than by all means disregard my comments and keep making these great videos that spark creativity, at least in me. Thanks, Alex

[@ekas9081]

Where did you buy the circular saw you used, sir?
Is there a Purchase Link?

[@Franciscoaldembergue]

Show meu amigo parabéns pelo seu trabalho ganhou mais um inscrito e deixo aquele like valeu 👍🏻👍🏻💯💯🤝

[@chrisn106]

I would like to know where to get some glide blocks like that. The things you make are so simple, but I never could have made them without your videos.

[@yvannavyf5039]

Superbe travail, je découvre, merci pour cette idée, où avez eu votre tournevis électrique ?! Un lien ? Merci.

[@farukgungoroglu2056]

Süpersin çok güzel bir sanat eser 👏👏👏👏🥂

[@alfantebeite8659]

Hello. Could you please let me know where you bought this little aluminum square? And also the ruler?

[@SSDIY]

I live in Japan, so it is difficult for me to answer your question.
Please search for 'Aluminum Profile Frame','carpenter’s square'.

[@bakuon-tv]

使われているきれいな板の名前は何でしょうか？初心者ですみません。

[@pw2588]

Hello, dear professor, can MDF be used to make the device?

[@AlexanderBessalov]

Скажите какой длинны трабка по которой ездят продольный подшипник с пилой дисковой ?

[@balt168]

Thank ,.U 😊

[@Umay2020]

what is circular saw model and code number ?

[@user-iu2kc3hm2x]

Здравствуйте. Подскажите что это за втулки в которых двигаются трубы?

[@TheBonbenk]

Hey bro, are you all right? why there is no new video?
I hope you're healthy and happy

[@user-hd8hr7ym4p]

MDFは劣化が早いので、治具に使うのはどうなんだろ。。。
使用環境が千差万別なんで、なんともいえませんが、
個人的には、前のバージョンのほうがシンプル&コンパクトで良かった気がする。

[@user-uq8ei1nj4p]

🔥💪👌👍🖐️

[@joaoluis14437]

Porque não postou mas????

[@pattayapattaya3742]

ประกอบ.... ดาดำเนินการ​

[@muratsakiroglu9743]

Alt yazı kullan alt yazı .