JBL Extreme Battery Replacement Lipo to Li-ion
Vložit
- čas přidán 12. 04. 2021
- My brother ask me for help. His wireless speaker runs out of battery power in just a few minutes. So in this video you will see how I solve this problem.
About Wireless Speaker Battery
Old Battery 7.2V 5000 mAh
2 series of lithium polymer 3.7V 2500 mAh
New Battery 7.2V 6800 mAh
2 series of lithium lion 3.7V 3400 mAh
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show - Jak na to + styl
Hello, i just did this battery replacement and it works! I will give some more info. I replaced the Lipo for the LG INR18650-HG2L 3000mAh - 20A which costing around 50% less than the brown ones in the demo. And another very important issue i was dealing with, my battery pack was slightly to big for its chamber caused by wiring. Therefor the lower lid could not seal properly and AIR was leaking when playing music loud. So resonance distortion was the result. I almost gave up, thinking my speaker was blown. So keep in mind the casing must be sealed completely!!! I used EPDM kit at the base of the inlet cable assy battery pack. Succes everyone, succes Léon
hi my jbl extreme battery dead
Those Batteries need to be isolated with soft material. Otherwise the sound will be soon or later bad because of their vibrations mate.😊
Otherwise good job👏🏿👏🏿
I did the same with my xtreme except that I used Samsung Lithium batteries. I like the Panasonic ones though. This was a fun project for me at the time. Great work on yours too.
Which type of batteries brother
Please do more such videos.. you are the Battery King
Yes indeed
The confidence you have while you disassembly that device is astonishing. I'd be afraid of breaking clips and stop immediately.
He is not a coward
@@ballessss well have you ever tried doing something like that? I sometimes hate clips because it's really tight and feel like it was gonna break when dissasembling something
It looks like the video was sped up a bit so his movements looks fast.
There is also a possibility that it's not his first rodeo.
I like your videos because I can feel the love and respect you give to all the items you repair.
As if they were alive.
Yes indeed
Yogkgk
@@sitihalifah7402 truja bruta
you should add foam for the battery compartment, so they dont rattle while playing music
Or even moving the unit around, would imagine it would clunk around as well. Maybe that part/addition just wasn't included in the video.
*rolleyes*
Agreed
@@macaroni2415 Looked like it was in there firm and tight anyway.
czcams.com/video/shkY7Q_Wmus/video.html
Thanks to you. I understand how to use the bms on this device. Every one needs to not throw away their battery powered items but to repair them their self. "Gear show" shows how we all can make a difference.
Yes indeed
Yeah totally agree, too bad some companies make it impossible to repair
Bms' WTF
@TheNigaHigaFan4Ever "coughs" Apple
Estupendo video sobre el cambio de bateria de este JBL Extreme de tipo Lipo a Li-ion, respetos y saludos desde Venezuela.
💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏🙏🙏💯💯💯💯
Hno. Venezolano, tenes idea del porqué cambio las pilas de color marrón, a las de color verde????
Desde BsAs. Argentina, un saludo
@@cleofec.7585 por que a bateria verde tem mais capacidade
@@cleofec.7585 Yo también me quede con el interrogante.
Y todavía no se porque.
Cómo determinó que referencia de baterías le coloco o cuáles son esas verdes que le coloco ?
Thanks a lot, I did that on my Xtreme and worked PRETTY FINE, about 11 hours duration using high quality cells.
Qual tempo de carregamento?
@@eltonsilva5922 nunca medi, deixo carregando enquanto durmo
Muito obrigado! Feliz natal
I did nearly the same with mine, but i used again a lipo. Great vid!❤️👍
Well done, that Lipo is a better choice.
What site can I order the batteries from ?
I've done it too, it works way better than the stock battery 😎👌
Yea I put 4 3000mAh 18650s into my JBL Xtreme 3 because the stock batteries sucked
Great job. One thing I would like to ask why we should use 2 yellow cables to join the pcb (BM) to the battery. Could we simply join the two BM points on PCB and use a single cable to connect it to the battery?
Thanks, I did this to my Speaker too and it last much longer now than the stock battery.
thanks, I was afraid to use the li-po pcm and transfer it to the li-ion battery, but now I consider it an option.
Love from India
You haven't put back the rubber gasket. Not only this use for waterproof but also help to airtight the internal to produce more vaccum to help create more bass in low frequency. Thats a very useful one. The JBL portable series are marvelous engineering of speakers.
I put it back, but I don't firm. Anyway thank you for suggestion!
Qe CD v
Thanks 👍👍😌
عمل رائع شكرا لك اخي
Did this 2 years ago... But never ever it will fit like you shown or the shown xtreme isn't sealed anymore. The passiv speakers loose a lot of power if this case isn't correct sealed. I had to remove a bit of cover both sites to get the seal close enough together with no little air gap. Other option would be to seal the hole and let the encloser with this gap.
Hi, I am from Indonesia, I Like your video
Yes indeed
Thank you CZcams for recommend me always think about this love JBL Xtreme 1 it's error battery nowadays
Thanking you bro...from this video learn something new....
Super Material!👍 Very handy!👌
I own a dindinmodern brand speaker. Honestly, it's really good. I prefer his bass. I've been using it for a year so far and it deserves my praise.
Awesome work thanks 🙏
SUPER!!!!
Yes indeed
What a masterpiece of art 👍
Awesome video..Thank you for sharing 💙💙💙
QUE SE VE FÁCIL HACER LO QUE TÚ HICISTE.
FELICIDADES.
SALUDOS DESDE CHILE.
Ş
I'm a bit suprised, i did many conversions like this, but the 18650 cell pairs did not fit inside right away, without some dremeling.
Also, if you planning on using the speaker for years to come, you should definetly put in a 2s balancer. The lack of it, in the original bms is what causes the lipo cells to die so soon.
What's that?
What is a 2s balancer?
@@gartheligon140 @Garth Eligon It is a little circuit, that is either a separate circuitboard that you can buy and connect parallel to the existing bms board, or it is a function sometimes built into the bit more expensive bms circuits. Its function is exactly what its name is suggesting: it equalizing the cell voltages in a battery pack when the pack being charged. The "2s" simply means how many cells it is design for, in this case 2s means 2cell.
Without a balancer, lithium cells tend to drift from each other in voltage, and over time, when charging the pack, one cell gets overcharged(and the bms shuts the pack down to prevent an explosion, while the other cell is far from being fully charged). And when discharging the less charged cell will depleat quickly, and the bms will again shut the pack down suddenly, to try to prevent the depleated cell from damage.
@@M0rtin67 Thank you, now I know. 👍👍
What’s a good site to buy the batteries from ?
Nicely done 👍👍👍Thanks for sharing
Yes indeed
Thank you very much for such a great detailed instruction.
I can disassemble the device but I cannot solder.
I never had to deal with soldering. Is there a direct replacement of Li-Polymer battery?
Yes, here's a battery available on Amazon
www.amazon.com/dp/B082V93V1J
5000mAh Battery Works with JBL Xtreme Extreme Portable Bluetooth Speaker 5000mAh Li-Polymer
Love the video... I'm not sure the average Joe can do this repair. And even though the battery exchange is really the most technical part of this, I'm not sure a local electronics shop would b worth the money they would charge to do it. Obviously it's gonna be less expensive to change the battery vs buying a new speaker, I would just need some help doing the battery switch itself.
Although it's awesome that he replaces the cells themselves, new (pre-wired) battery packs are also freely available online! This means you only have to do the screws and clips, the new battery will look exactly the same as the old one upon removal and simply snaps into the socket.
@@Jwk2211 the point is: the factory battery is Lithium Polymer this pack he's building is Lithium Ion. Lithium Ion is a safer battery, and does better with charge discharge cycles than LiPo.
I personally don't have the ability to build a Li Ion pack, so I bought another LiPo from Amazon. Would be nice if someone pre-made ion packs and sold online 😉
@@Jwk2211Where can one find such a thing?
Nice upgrade. I hate that startup/shutdown sound. It's silly and annoying. You can turn it off by using the JBL app. I've done on mine - now it's quiet.
EGJ Extreme Good Job!
I will do it exactly the way you did it. Thanks
Isn't Li-po max voltage something like 4.35V? It could overcharge these cells. Is it still alive?
Gayet başarılı bir çalışma olmuş elinize sağlık. 👍
I wish we could swap bigger batteries for smartphones at least as easy as this
Thx for uploading beyond drill machines
Try factory reset,will solve lot of issues ,just find right method , different buttons combination for JBL series like 2,3,4,5, etc
Amazing sir
Love the way you regonize your working place so nice. ^_^
Did you use the old PCB board from the defective battery and resolder it to the new ones?
Hi
Dude, just replaced my old tired, empty batteries, Can't thank enough. Jus hope my batteries purchase was a good one. Anyways, if/when change is needed again, I'll be ready!
Do you have, (or know any videos on How to get an Altec Lansing bluetooth speaker apart? I have 2 of them, one is their "Baby Boom" model, it has no sound and painfully short battery life. Being a $20 unit, I want to learn on that; the other is their "Super Lifejacket" which does work, but no matter how long I charge it, the battery never indicates being fully charged, (the red LED never goes out).
Que organização nessa oficina em 👏
Thanks for this vedio 👍👍🙏🙏😎😎
7.4 v*5a=37watt old battery, New battery 4*3a*3,7 v=44.4 watt. 44.4/37=1.2 +20%power it is very little
5000mAh old vs 6800mAh new battery, 1800mAh more is a big improvement
Thank u, this is exactly what I need to do with my Harman Kardon speaker👌
You're welcome, I'm glad it helps you!
Try answering some of these people's legitimate questions and concerns! Not just thanking people for stroking your ego. Or don't even make these videos if you can't explain yourself.
Bro, I'm having a fake JBL charge 2+. I used it in my school dance practice for like 3 years. And suddenly one day it stopped working. When I pressed the power button, it was dead. But when I keep for charging, the speaker will not work but the light comes on. What should I do?
Do same more JBL fixing
I believe this reaper
Love work like this now I know great 👍
I really like when you do the battery replacement like this, could you do more please
Nice job! But do I need to replace the charger or can I use the original charger? Inscribed on the original 19v And in these batteries is it 7.4v?
Great video! I love it when you branch out! 🤩
Yes indeed
excellent project👍
Yes indeed
Great job, but be careful when screwing the driver, you wouldn't be the first who let the screwdriver slip and puncture the foam of the speaker (don't ask me how I know...) 😅
Okay, thank you for reminding me :D
I would use my fingers to surround the screw driver and hold it in place because it's better safer than sorry😂
if you have good soldering skills something like this would be easy great job well done
JBL7 de boa tarde vou para casa de mãe e esqueci com
Do you get JBL xtreme distortion at full volume.? i got some distortion . sounds like clipping,after battery replacement 18650.But only when i listen music on yotube music or songs from my phone with hight quality 320kbps
Omg bro you are a GOD 👏🏻👏🏻👏🏻👏🏻
Zase skvěle.
Nice video 📸
Hi sir I am your big fan
Why u don't change batteries controller?
良い仕事の兄弟、あなたの仕事は本当に素晴らしいです。❤️
You can increase the capacity to 10000 using 21700 batteries (higher price) instead of 18650. Maybe a modification is needed but from the looks of the compartment, I think it can fit in nicely.
These batteries are 3000mAh each so all of them together are 12000mAh. More than 10000 so that's good too.
@@peterparisopoulos9968 it's 2S2P configuration so 6Ah 7.4Vnom
@@peterparisopoulos9968 wrong
Very Good Video 👌 Good Work.
I have a question , how many mHA have the selfmade Akku Pack and how many mHA have the Original?
Very nice, but to be honest it seems like a lot of work. So i'll just throw mine in the bin and buy another one if you don't mind. 😊
Sell it or give it away
Amazing
Good job, you need hear music while restore the other tools.
Yes indeed
I love your channal 🤩🤩😍😍😍😍😍
انته الافضل دائما
Have the JPL Charge 4. I leave mine plugged in so it never goes dead and used it while watching this video.
Great as always
Yes indeed
👍👍👍 Mantap
Make a vídeo fixing a stereo
Hi, Nice work!👍
Excellent
Great video. Can this speaker work without battery , only with charger connected ?
No freaking way! This is awesome..
Yes indeed
O Brasil é seu fã🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Irruuuuuuuu
New juice for blue tooth! .... hey that rhymes... great Job Gear Show!!! Warm regards!
Excelente!
Awesome
أنت فنان بمعنى الكلمة
Did you forget to reinstall the gasket?
Of the battery brands you use, which are the best?
Great job
Good job bro
This upgrade works also for the JBL Partybox 100?
Good job! But I need some clarification. I've seen different schemes on the same issue, there minuses were connected to BM and B- respectively... Pluses were connected to B+ and another BM. Also only two minuses were connected in parallel (for each battery). In your example you have connected all minuses in parallel and then to BM (one BM left alone). Why so different? I bought another BSM, since I'm not sure that stock is still alive. But that new BSM has 4 contacts: B+, B-, BM1 and BM2. So I wonder how to connect it to batteries. Thanks
This really confues me too.
and effective? did it last longer than the previous battery??
GOOD 👌🌼
Imprecionante
Я один не понял, как он паял коричневые батареи а вставлял зеленые ???
То что паял походу бестолку, потому что 0 выдали, потом купил уже батарейки у которых больше ёмкости
Too Good Brother
I know if you put batteries like "- === +" and "- === +" you get a "in serie" configuration and that gives you a sum total of the 2 batteries in terms of voltage
And i know that batteries in parallel gives a sum total of amps
but i didn't know you could mix and match series and parallel to get a mix of +voltage and +amps
有一种干冰清洗机,接到空压机上,混合干冰气体之后喷出来,可以清洁电子电路和汽车油泥,有条件的话试试那个?
Really puzzled actually, why? Advantages of a LiPo battery
It is safe from explosion, unlike Li-Ion battery. It does not lose its charging capacity as fast as a Li-Ion battery. Hence its life span is greater than 1000 times which is higher than a Li-Ion battery. So you put in a Li-ion, lol. Great choice.