Woodturned Inside-Out Christmas Tree Ornament
Vložit
- čas přidán 6. 09. 2021
- For those who are curious about such things: I show how I make an inside-out Christmas tree ornament on a wood lathe. This one is made from Pine wood and painted gold on the inside. I'm new with this technique, so I'm learning more about it with each ornament I make.
Thanks to Ellen Wight for running the camera for me.
I like the idea of using the newspaper in the glueing step
Maybe a useful tip. I take the blocks and add about an inch in length. I then glue just the end 1/4-1/2" of all the blocks together. After turning, just trim the ends off before the glue and there's zero fight to pull them apart!
Way cool!!! I might think about a green tree inside.
Great job!
That was an awesome job. Thanks for sharing your video.
Oh how unique and pretty, heirloom quality.
very nice I like the gold that you put inside
Every video has a learning moment if you are ready to learn...slow enough to follow.
Nice! Great idea!
Nice work. Interesting process. Full View and Like 👍
Nice! I'd be tempted to add an LED light to bring out the features of the inside of the ornament. Thanks for opening my mind to a new to me turning technique!
Look ewal nice. Thanks for sharing.
very beautiful christmas tree decoration
very cool, thanks for sharing
Very nice mate
Nice job!…and Subscribed!!!
Hey man, it's awesome.
Thank you for sharing.
Great job! I want to make a tree inside of a tree.
use a chuck on both ends you wont have to glue nothing untile you do the last part
Sangat kreatif.. Hasil kerja yang bagus kawan 👍
maybe strap the blanks together with filament tape at either end instead of gluing the newspape into the joint?
An idea. What if you made the blocks longer and not round them off. Do your turning on the outside, and then like you did do the outside but do it so you can separate them and glue with the first outside turning back to the outside. Then turn the square ends down? I'm not sure I explained it well.. Thanks.
Have you though about macking a set of Mandrels with a squair reses the size to sute then no gluing needed just a though
Nice 👍
You could have taken at least another 1/4 inch off the center diameter, and expose the inside. Still, quite nice.
look forward to your video !
Could you start with a single block, do the ornamental turning, and then quarter it on a bandsaw with a fine blade to avoid all the faff with the paper, glue and tape?
I don't know. I'm a beginner at this, just trying to figure out what works. Go ahead and try it an let us know how it works out.
Nice beause ı dount know. What is this?
I'd drill a hole in the top part and thread an LED light inside
bom.
Nice job, though it looks more like a plumb bob.........
😂😂😂😂
typiquement anglais, rien à voir avec l'image du départ!
lol I like your technique but that ornament is fugly
Ever thought of writing your text out before taping your video? It probably would speed up things by a factor two: you're really very s.l.o.w. Another tip: if you're repeating a certain operation (like gluing pieces of paper onto sticks of wood), it's clear enough to show the action once, and then show the end result afterwards, in stead of taking us through the same process several times.
Maybe use something better than pine... although im impressed it didnt tear out an ungodly amount.
This is the worst inside out ornament ive seen done....
Пол часа времени коту под хвост на просмотр како-то херни ненужной.
Ну чему научили в школе. Они же кубики склеивают в 8 классе из бумаги. Это потом идут в колледж с профессиональным уклоном. Этот пошёл учиться всякую херню делать
@@user-dq9dn1hd6u Я думал он реально что-то путное делает.
Зато:станок не из водяного насоса,с двигателем от стиралки,патрон не из гидроцилиндра,резцы не из напильника.И есть возможность три дня делать игрушку(ни печки,ни воды,ни сарая)
von 30 Minuten Video, sind 15 Minuten gelabert