We bought a new ATC Quest enclosed trailer!
Vložit
- čas přidán 5. 07. 2024
- A quick video review of our new ATC Quest 405 Enclosed Car Hauler. Follow us on Instagram!
/ windycityexotics
SUBSCRIBE IF YOU HAVEN'T ALREADY! Make sure to hit the POST NOTIFICATIONS so you see when we upload!
Music from Epidemic Sound (www.epidemicsound.com)
Some Of Our Other Great Videos!
WE TURNED OUR FERRARI INTO A BOMBPOP FOR THE GOLDRUSH RALLY
• WE TURNED OUR FERRARI ...
REVIEW OF MY NEW 2019 MCLAREN 600LT!
• REVIEW OF MY NEW 2019 ...
TAKING OUR $320K MCLAREN ON CROWN RALLY...WHAT ARE WE THINKING?
• TAKING OUR $320K MCLAR...
HOW MANY MCLARENS NEED TO BURN DOWN BEFORE THIS FIX THIS?
• HOW MANY MCLARENS NEED...
DODGE DEMONS AND LAMBORGHINI AVENTADORS DELIVERED
• DODGE DEMONS AND LAMBO...
THE 2019 DODGE CHALLENGER HELLCAT REDEYE HAS ARRIVED!
• THE 2019 DODGE CHALLEN...
On this channel you may see many familiar faces (some of which may be in this video) from the automotive CZcams space and industry. Many of these CZcamsrs have been influencers of mine and I watch their content frequently. I encourage you to go check out their videos and subscribe to their channels.
Go follow their channels:
STREETSPEED717 - / @streetspeed717
AUTOVLOG - / mikesautoreviews
TALL GUY CAR REVIEWS - / @tallguycarreviews
SAVAGE GARAGE - / @savagegarage
SUPERSPEEDERSROB - / superspeedersrob
DAILYDRIVENEXOTICS - / dailydrivenexotics
ALEX CHOI - / @alexchoi1
1320VIDEO - / 1320video
MR JWW - / @mrjww
VEHICLE VIRGINS - / vehiclevirgins
SHMEE150 - / shmee150
DOUG DEMURO - / @dougdemuro
Some of the Rallies that we participated in or will do in the coming year:
Goldrush Rally - / goldrushrally
Crown Rally - / crownrally
Ultimate Road Rally - / ultimateroadrally
Ace of Spades Rally - / acespaderally
Corsa Rally - / corsarally
Gumball3000 - / gumball3000
Products and Services I use: (no sponsorships)
ANRKY Wheels - / anrkywheels
PPF and Ceramic Pro: Luminescent Detailing / lumidetailing
XPEL PPF - / lumidetailing
Ceramic Pro Coatings - / ceramicprousa
1221 Wheels - / 1221wheels
Vehicle Wraps - M.O. Graphics - / mo_graphics_ - Auta a dopravní prostředky
I'm glad your satisfied with your car hauler.
I solved the same problem by using the trailer jack to tilt the trailer lowering the approach angle. KISS
I have a 26 foot ATC enclosed that has extra tall bumpers and a 5 foot long flip over ramp. My car is only 3 inches off the ground in the front and loads without a problem.
Quick question: were you able to find a 36" hinged ramp so you could eliminate needing the race ramps? Thanks!
No support Jack's on back off trailer? We're you hook up to the truck?
Way overkill on the race ramps, all you need is two pieces of 2x10 about 3 feet long. You only need that 2" until the front tires are onto the ramp. Also, better to have E-channel than D-rings for tiedown so that you can use wheel baskets. Pulling straps to D-rings can cause damage to splitters, and some exotics builders require baskets. One more tip, use the aforementioned 8x10s under the front wheels if you're using D-rings, gives you a little more room to get the straps under.
Good deal just curious though the back of car looks higher you couldn't back into the trailer without the front getting jacked up?
Just found this channel. I think that I saw your demon at the belvidere mopar happening. Very cool
Yep, it was there. Thanks for following!
Look into the rail ryder system. Best thing you can invest in if you load by yourself alot.
Since it’s loaded in the trailer, you can just bring it by anytime. My garage is open😜
Haha. I'll get back to you on that.
Nice!!!!
Great video! Great trailer! I am cheap and would have made my own extensions to keep the car and ramp as low as possible to the ground. Good luck with it, and have fun.
I did for my Viper but they weigh about 125 pounds a piece as I choose to weld steel instead of aluminum. My mistake on that one. But the ramps are hell for stout. I think they are good for about 10k pounds.
You didnt do your research very good on the race ramps. You could of got a set that wasnt so high and that will let you keep your flap on the door. Overall sweet car and trailer. I have a Atc and got race ramps to load my vette.
What was the cost for your trailer I'm considering purchasing one trying to determine which way to go?
How much did you pay? I’m looking for a setup like this
Montrose Trailers custom enclosed power tilt car hauler would solve all your low clearance issues.
How much was this trailer?
Hi I have a question. What kind of truck do you have that is able to pull that large trailer with the car inside? What is the recommended towing capacity? I am looking to buy a truck and trailer for my show car as well but I am lost on where to begin. Thank you
Not hard to figure out a diesel would be a major plus take the weight of the car u will haul and the weight of the trailer and match that weight to the towing capacity of said truck but almost always a 2500 diesel will tow anything u can put on it legally
What's the names of the enclosed trailers that can tow a car or suv and whats the names of the websites i can buy the trailers ?
I hated my extruded aluminum floor! Went to a rubber coin floor on my next ATC. What a headache to clean! Get some boggy wheels weld on both rear corners! You’ll love it. Don’t get a smart jack if you go electric. Complete junk. Nice trailer! Congrats!!!
Which floor was a pain to clean?
Sweet trailer but I would have just used a pair of $5 2x8s instead of those expensive 11 foot ramps. You only needed an extra inch or two to get the front splitter lifted.
Are you still satisfied with ATC, I am planning on purchasing one
How much did this trailer cost?
Good luck with it. Bet they never seal up any tow hooks in the floor or the spare tire compartment as they will let all kinds of dust,water,snow inside . Also check your side door aluminum removable fender , any seals on it? If not it will let a ton of crap in . I bought the same trailer last year to haul my high end cars around it actually ended up damaging my ride due to letting calcium off the highway inside spraying on my car and damaging my paint. I own a bodyshop and I was extremely upset. ATC won’t due anything to repair it at all. Not a good trailer and very poor company to deal with . Good luck
You can most likely just crank the trailer jack up and raise the hitch which will in turn lower the approach angle of the ramp. Then no extensions are needed, problem solved.
I wish it was that easy. I have tried all of that but these low splitters are tough to clear. I am probably going to have a custom ramp made so I can avoid the race ramps
Negative Greg. Not on that low of a car
great video! great trailer! however I do not like loading a car like that, it is an accident looking for a place to happen,, too nice a car and trailer, there has to be another way. all the best.
Should have bought a black trailer to match your truck. Would be a nicer rig.
I had a 24' enclosed car hauler that was black. Never again, in the summer it got so hot in that trailer it was unreal.
Who cares?
White is cooler in the heat....
Should get something to dim the lights in your garage, That way you don't look like a total tool wearing your shades inside...
I am sure he we will take your advice. Btw, what man cares about how another man looks?
@@billiebuckamer8189 Maybe I care how he looks cause I find him cute? Maybe he'd be cuter if he took the glasses off? Maybe I find you cute Billiebuck67???
@@DixieNormas Ha! :)
M icah
You built a brand new trailer for a low Viper and didn't occur to you to get longer approach ramps?????????? Race ramps are a joke. ATC could have made you a one piece approach or nice alum ramps attached right to your door without having to carry that foam bullshit around.... Not too mention you have the trailer sitting way too high in the back to load. Get an electric jack, jack up the front of the trailer and you could get away with a 36" to 48" transition ramp......