For the 2 component reactor, it does still work, you just need to modify the output values. change the regex to somewhere between 12-25 and the greater than 50-80. Each sub and reactor on it is slightly different, you will need to fine tune it to find the sweet spot. Be sure to grab a fire extinguisher as well when you test it out ;)
As someone who doesn't know when to know it's working properly, what numbers or ranges are you shooting for on fission rate and turbine output? Are you trying to always get it to 100 on the turbine and averaging 15 on fission, or are you looking at another metric to know when it's set right?
i swear the more and more you know about electrical wiring and shit the more broken this game becomes, love your work, defiantly gonna use it for my next game
The dev nerf to the ground reactor controller but they didn’t predict me. I created a new reactor controller that just change the fission rate and put the turbine output to 100 so with 4 fuel rod the fission rate don’t change a lot like max by 10. It make so that the reactor react really fast but it consume more fuel.
TLDR: 1. increase reactor output for more speed 2. connect more water pump rooms to the ballast controls 3. place foam explosives connected to a button for emergency repairs
Regexfind still works, just getting the expressions right can be a pain. For the fixfoam grenade, you could also use a water detector with level% or dangerous pressure as the 1 output, so it triggers in real emergencies even if there's no one to push the button. Plus, it would trigger as needed and not all at once.
@@1000-THR I would suggest you stick to the barsuck for a while. it took me a long time to move to bigger subs and even longer to start using the sub editor, so don't worry too much about it. Just enjoy the game, there's a lot to learn and do!
If you are wondering why it isn't working for you, the Bang-Bang controller does not work as well since the 'hoist the sails' update. It's still viable if you are willing to spend a lot of time tweaking values & putting out fires to find out what works for your sub, but it isn't a magic wand any more, & doesn't seem to work quite as well as before even if you get it right. The Ballast tank thing still works tho.
2:53 hell naw, I DID do this with the Barsuk in that small compartment on the forward end of the sub. Pump speed was abysmal 🤣 so I added a mod that lets you craft/buy sub components and added two extra pumps: BOOM, third ballast tank on the Barsuk.
I've seen you doing some of that stuff in your speedruns. Thanks for the detailed explanation of those manipulations! Feels awesome when you can do this in a game.
For the emergency repair, it could would take more wiring but you could potentially hook up the detonators so the captain can just remotely activate them by ship section. It might also be possible to use those water detectors to have one auto-trigger when the hull is breached and the compartment fills if you're able to put the water sensor up off the floor.
i would love to see more of these wiring diagrams ! because i have a workshop ship modded a little in the sub editor got more lights that i can use it as a scout and now my diving airlock has 2 more lamps but i dont get the wiring done i dont know how to wire this 2 lamps to one switch inside of the airlock.... this is a shame for me as a mechatronic engineer... but maybe i think to complicated how to connect it properly love your videos !
@@freespeech3817 That's a door that automatically closes when you're not moving near it. For a door that opens automatically, that circuit actually gets in the way.
Is there some sort of guide that can break down the complexities of wiring as a whole into digestable material so I can teach myself how to manipulate all this and create my own ideas on my ships? Definitely gonna be adding some buttons for the captain and crew, thanks for this! We have a very chaotic clown who is addicted to alien blood and this will help more than you may know haha
What I did for my submarine was look at vanilla submarines' wiring (mainly dugong) and see how their wiring worked, then I just sort of copied it (without the organization...) It worked fine for the most part, it does everything you'd need a submarine to do, but It's extremely bare bones, don't know if I'll post it to the workshop
hey dude cool video and all but you got to work on your audio quality, i had to turn down the volume and wile your voice was quieter it still felt really loud
2 component auto reactor doesn't work that well anymore since a nerf in the last update, emergency repair system anyone can put c4 in your detonators or detach the detonator and place it with explosives anywhere they like. Letting detonators ever be within the public's reach is a hazard.
True about the detonators, but then again, a troll will do anything in public so detonators or not things will descend into chaos. For the 2 component reactor, it does still work, you just need to modify the output values. change the regex to somewhere between 12-25 and the greater than 50-80. Each sub and reactor on it is slightly different, you will need to fine tune it to find the sweet spot. Be sure to grab a fire extinguisher as well when you test it out ;)
@@IronicandDead if you put the greater component to 50-80 you will not be able to use 100% of your reactor output and if you don’t put 4 rods with the reg ex and you change the out put to 12-25 you won’t be able to produce enough heat to use 100% of the reactor. So regex is easy fix just put 4 rods but the greater component sound like a bad idea.
Personally I created a 7 components controller by my self. It work really well. The idea of it is to set the turbine output to 100% and only change the fission rate and put 4 rods of fuel. Like that only the fission rate need to move and usually only between 12 to 24 so it reach the valu that you need really fast cause it don’t need to move a lot
This is because your running the reactor hotter, the controller setup is designed to be able to give you more power overall and allow you to use more rods.
a very minor amount is, as the reactor will go into overheat mode periodically, but it's basically the same manually increasing the output. Bascially you won't notice it.
yep, just needs some modification to the regex output, set it at around 12-20ish then the output of the greater than between 80-100 you will need to figure out the sweet spot as each sub is diffrent
@@vairr6193 Yes, so the new update changed the output of turbine and temp, there is a delay now. If you put the regex output down at 12-20 ish then the output of the greater than around 70-100, you will need to test it. You should be in a range that can support the delay. Each sub is different, but hope this helps. p.s make sure to have a fire extinguisher on hand when u start modifying ;)
No mention of skill trees like mechanic with faster engine per mechanic lvl, faster pumping (mechanic), additional pumps (mechanic), more energy output or more effective (ingeneer) and no mention of overclocking
true, but then again there was no reference point on where to start with wiring and components in the game, so the ability to use one, even just a bang bang was missed by so many.
Well you just go in the editor, load in the sub you want to modify, select the engine and set the force to 1000000000000000000000 and load out the submarine the way you want and set the buy price to the lowest possible (1000mk). And bam, next station, your dream submarine is there.
The regex command is ^[1-4]?.?.?.$ , there isn't a list per say, more just how regex works, you can google specifics. For the Orca 2, try setting the regex output to 20-30 ish and the greater than component somewhere between 70-90, you will need to adjust for wiggle room.
Emergency repair seems a little expensive... so I'm gonna make an emergency localized self destruct system to deal with nasty creatures (and nasty hulls (and nasty crew members)) and its activated by motion detectors :]
wow thats really boring and hard, I'll probably have a stroke from all the thinking if I ever even attempt this but actually, for the Camel sub, I had to make something even harder than this, much harder. Why did I spend a sleepless night doing wiring. I didnt even play the game.
@@IronicandDead Thanks for the reply friend. I knew about the overvoltage, I just expected a video dedicated to testing engine overvoltage values from the title.
A little clickbaity no? Decreasing the reaction time of the engines doesn't increase your max speed, only your initial acceleration. So, how exactly did you make the sub go 50 knots without upgrading the maximum engine force? Downvote.
Hey there, thanks for the feedback, just to clarify a few things, I never said it increased the max speed forwards. The additional ballast tanks are where you get the improvement to the base speed for the decent of the sub, hence you make your submarine go faster. For the engine forwards speed there is no improvement to the base speed, however as there is a reduction to reactor reaction time, there are no drops in performance as the engine is dependent on power. When you have the fabricator, deconstructor and medical fabricator all running at the same time you get power drops and the engine stops working. This means your time from point A to B will be faster with the reactor upgrades. Not that your engine base speed will be faster. I Have a full technical breakdown from speed running with this submarine available on my discord if you would like to know more about it :D *Also this was recorded before the talent nurfing of tinkering, and the submarine did already have full upgrades purchased from a station.
@@IronicandDead Okay but in the intro line to the video you say: "We are gonna be taking a vanilla Barotrauma Submarine, and modifying its core configuration to make it go faster, without touching the submarine editor, or buying the speed upgrades..." It *literally* does not go faster, other than in the y, those were good points. The reactor spins up faster, meaning you don't drop load, and it accelerates faster. I suppose you could make an average x-velocity argument, but thats not what you said. Clickbait.
For the 2 component reactor, it does still work, you just need to modify the output values. change the regex to somewhere between 12-25 and the greater than 50-80. Each sub and reactor on it is slightly different, you will need to fine tune it to find the sweet spot. Be sure to grab a fire extinguisher as well when you test it out ;)
You were using orca in your speedrun, do you have exact numbers you like on your components?
This doesn't work anymore
@@KW_2000 Tested in 1.0 on the Camel, still works :D
@@IronicandDead Thanks, i was looking for this 😉
As someone who doesn't know when to know it's working properly, what numbers or ranges are you shooting for on fission rate and turbine output? Are you trying to always get it to 100 on the turbine and averaging 15 on fission, or are you looking at another metric to know when it's set right?
The emergency repair system blew my mind.
Thanks for the idea, will definitely try it out later.
Damn I must be a genius then, cause that's the first thing that came to mind when I unlocked fixfoam grenades.
Thats also a bad design. With "Wall" mode motion sensor you can make a fully automatic efficient autorepair system
Instructions unclear, i am now stuck half way in to an alien ruin
haha
Lucky. You're only halfway in...
Just paint it red
Nice
Underrated comment
Ya Gitz
We found the Orc
@D. H.K.C you mean Ork;) in 40k it's with a K
i swear the more and more you know about electrical wiring and shit the more broken this game becomes, love your work, defiantly gonna use it for my next game
Thats the beauty of Barotrauma. If you know how to get extreme advantages it will let you.
@@Buckent just like space station 13 / 14, love it!~
The dev nerf to the ground reactor controller but they didn’t predict me. I created a new reactor controller that just change the fission rate and put the turbine output to 100 so with 4 fuel rod the fission rate don’t change a lot like max by 10. It make so that the reactor react really fast but it consume more fuel.
TLDR: 1. increase reactor output for more speed
2. connect more water pump rooms to the ballast controls
3. place foam explosives connected to a button for emergency repairs
Regexfind still works, just getting the expressions right can be a pain. For the fixfoam grenade, you could also use a water detector with level% or dangerous pressure as the 1 output, so it triggers in real emergencies even if there's no one to push the button. Plus, it would trigger as needed and not all at once.
your water detector suggestion is brilliant
@@redcat9729 Thanks!
i dont understand a thing, i just began playing this game, im still using a barsuk
@@1000-THR I would suggest you stick to the barsuck for a while. it took me a long time to move to bigger subs and even longer to start using the sub editor, so don't worry too much about it. Just enjoy the game, there's a lot to learn and do!
If you are wondering why it isn't working for you, the Bang-Bang controller does not work as well since the 'hoist the sails' update. It's still viable if you are willing to spend a lot of time tweaking values & putting out fires to find out what works for your sub, but it isn't a magic wand any more, & doesn't seem to work quite as well as before even if you get it right. The Ballast tank thing still works tho.
2:53 hell naw, I DID do this with the Barsuk in that small compartment on the forward end of the sub. Pump speed was abysmal 🤣 so I added a mod that lets you craft/buy sub components and added two extra pumps: BOOM, third ballast tank on the Barsuk.
I've seen you doing some of that stuff in your speedruns. Thanks for the detailed explanation of those manipulations!
Feels awesome when you can do this in a game.
For the emergency repair, it could would take more wiring but you could potentially hook up the detonators so the captain can just remotely activate them by ship section. It might also be possible to use those water detectors to have one auto-trigger when the hull is breached and the compartment fills if you're able to put the water sensor up off the floor.
the fixfoam emergency button is actually pretty cool, might help survive my crew the end of the campaign
I was watching and didn't realize it was muted and thought I had to intrinsically know what the context was widepeepoHappy
i would love to see more of these wiring diagrams ! because i have a workshop ship modded a little in the sub editor got more lights that i can use it as a scout and now my diving airlock has 2 more lamps but i dont get the wiring done i dont know how to wire this 2 lamps to one switch inside of the airlock.... this is a shame for me as a mechatronic engineer... but maybe i think to complicated how to connect it properly love your videos !
Thx a lot i needed this to escape the termal wastes
Hopefully we'll get a guide on automatic doors
Just get a motion detector and wire it to the doors
You know it is in game for few years under the "item assembly" tab?
@@freespeech3817 That's a door that automatically closes when you're not moving near it. For a door that opens automatically, that circuit actually gets in the way.
@@Grahdens Don't forget to add water detectors signal to the equation.
i'll definitely subject a random engineer to these tasks in my next run
Is there some sort of guide that can break down the complexities of wiring as a whole into digestable material so I can teach myself how to manipulate all this and create my own ideas on my ships?
Definitely gonna be adding some buttons for the captain and crew, thanks for this!
We have a very chaotic clown who is addicted to alien blood and this will help more than you may know haha
not yet, but hopefully soon, also check out youtube.com/@TheGamingNerd2022 they do lots of advanced guides on it 😀
What I did for my submarine was look at vanilla submarines' wiring (mainly dugong) and see how their wiring worked, then I just sort of copied it (without the organization...)
It worked fine for the most part, it does everything you'd need a submarine to do, but It's extremely bare bones, don't know if I'll post it to the workshop
Bruh this whole time I was so excited to hear about how to make the engine work better on the sub...
hey dude cool video and all but you got to work on your audio quality, i had to turn down the volume and wile your voice was quieter it still felt really loud
Portable Pumps can also provide a good way of getting rid of water quickly. Multiplayer Only: Let somebody tinker with the engine
This guy right here!
i thought this would be a tutorial for the 100kmh achievement lol
na, but that's easy, just go full speed and get hit by an abysall monster
1:
Shout at the driver despite being surrounded by ice spires.
Thanks Captain
2 component auto reactor doesn't work that well anymore since a nerf in the last update,
emergency repair system anyone can put c4 in your detonators or detach the detonator and place it with explosives anywhere they like. Letting detonators ever be within the public's reach is a hazard.
True about the detonators, but then again, a troll will do anything in public so detonators or not things will descend into chaos.
For the 2 component reactor, it does still work, you just need to modify the output values. change the regex to somewhere between 12-25 and the greater than 50-80. Each sub and reactor on it is slightly different, you will need to fine tune it to find the sweet spot. Be sure to grab a fire extinguisher as well when you test it out ;)
@@IronicandDead if you put the greater component to 50-80 you will not be able to use 100% of your reactor output and if you don’t put 4 rods with the reg ex and you change the out put to 12-25 you won’t be able to produce enough heat to use 100% of the reactor. So regex is easy fix just put 4 rods but the greater component sound like a bad idea.
Personally I created a 7 components controller by my self. It work really well. The idea of it is to set the turbine output to 100% and only change the fission rate and put 4 rods of fuel. Like that only the fission rate need to move and usually only between 12 to 24 so it reach the valu that you need really fast cause it don’t need to move a lot
There are a ton of other ways to blow up c-4
ok questions
with the reactor setup i DONT turn on auto mode?
also does it burn through rods faster that way?
This is because your running the reactor hotter, the controller setup is designed to be able to give you more power overall and allow you to use more rods.
Regex reactor is obsolete now (nerfed)
The reactor thing didn't work for me.
me on my way to turn my submarien into giant moving ballast
Add a [mem] to circuit for pump%rate control limit??
Great vid, does it still works?
(Blood in the Water patch)
Yep
does it increase fuel consumption? Is the fuel wasted depending on the consumption, or just burned?
a very minor amount is, as the reactor will go into overheat mode periodically, but it's basically the same manually increasing the output. Bascially you won't notice it.
0:20 Whats in the honkmother!?
@1:11 does that work also for the scout ship?
Works on all subs, just needs modifying the regex and greater than components output, to fit the subs reactor output.
@@IronicandDead Been looking where do I find what to modify it to?
You may be wondering, "why didn't he just paint flames to go faster?"
Well the problem is, you can't have fire underwater
I have more on my hands due to car maintenance. and I DON'T WAN'T any more wiring jobs on my HERJA!
Does the reactor trick still work?
yep, just needs some modification to the regex output, set it at around 12-20ish then the output of the greater than between 80-100 you will need to figure out the sweet spot as each sub is diffrent
@@IronicandDead Recommendations for the humpback? I cant quite get it right.
@@IronicandDead got it working like a charm thanks man
@@IronicandDead what outputs should I have it at for the Kastrull?
The barsuk has 4,200 output so then how would I calculate the expression?
Me like take shotogun shoot bad aliens me not understand
How to make your crew crash into rocks because of an incompetent Captain
Im using kastrull sub why it still have power issue when i move the submarine?
It's a big sub, it has power balance issues running things at the same time. an auto reactor will help mitigate this.
@@IronicandDead im using the auto reactor on the video, but still i still get power issue. Should i change the output of regex?
@@vairr6193 Yes, so the new update changed the output of turbine and temp, there is a delay now. If you put the regex output down at 12-20 ish then the output of the greater than around 70-100, you will need to test it. You should be in a range that can support the delay. Each sub is different, but hope this helps.
p.s make sure to have a fire extinguisher on hand when u start modifying ;)
No mention of skill trees like mechanic with faster engine per mechanic lvl, faster pumping (mechanic), additional pumps (mechanic), more energy output or more effective (ingeneer) and no mention of overclocking
I see RegEx
I'm scared
DIVERT ALL POWER TO THE ENGINE
Wont the next update mega nerf auto reactor methods?
yes and no, each one now requires a more custom setup
@@IronicandDead ah, to be fair the two componenet reg ex trick was kinda cheesing it tbh.
true, but then again there was no reference point on where to start with wiring and components in the game, so the ability to use one, even just a bang bang was missed by so many.
Well you just go in the editor, load in the sub you want to modify, select the engine and set the force to 1000000000000000000000 and load out the submarine the way you want and set the buy price to the lowest possible (1000mk). And bam, next station, your dream submarine is there.
None of these affected top horizontal speed I feel clickbaited
Coolll Stuuuffff buddy
where is this list for the regex find commands, i'm trying to do this with the orca 2 and no luck
The regex command is ^[1-4]?.?.?.$ , there isn't a list per say, more just how regex works, you can google specifics. For the Orca 2, try setting the regex output to 20-30 ish and the greater than component somewhere between 70-90, you will need to adjust for wiggle room.
A clown replaced the fixfoam with stun grenades on my sub ..
Not so ironic now?
maybe dead though
we crashed into a rock at insane speeds
hahaha glad to hear the speed tips are working
Emergency repair seems a little expensive... so I'm gonna make an emergency localized self destruct system to deal with nasty creatures (and nasty hulls (and nasty crew members)) and its activated by motion detectors :]
le noice
wow thats really boring and hard, I'll probably have a stroke from all the thinking if I ever even attempt this
but actually, for the Camel sub, I had to make something even harder than this, much harder. Why did I spend a sleepless night doing wiring. I didnt even play the game.
does anyone have a good designed ship and also with those modifications on it? no matter how many time I watch this I cant do it XD me too stoopud :'(
Instructions unclear. My entire ship decompressed and exploded. Killing everyone on board.
nice
I thought you would show how to make the engine faster, not how to sink faster :/
If you use this studio.czcams.com/users/video25vl7V4EV18/edit You can overvolt to make it go faster.
@@IronicandDead Thanks for the reply friend. I knew about the overvoltage, I just expected a video dedicated to testing engine overvoltage values from the title.
Wrong
You paint it red
with stripes
jesus christ
I use an ai engi/mechanic and you want me to do advanced wiring? I'll just die at the bottom of the sea
Pimp my sub
:)
A little clickbaity no? Decreasing the reaction time of the engines doesn't increase your max speed, only your initial acceleration. So, how exactly did you make the sub go 50 knots without upgrading the maximum engine force? Downvote.
Hey there, thanks for the feedback, just to clarify a few things, I never said it increased the max speed forwards. The additional ballast tanks are where you get the improvement to the base speed for the decent of the sub, hence you make your submarine go faster.
For the engine forwards speed there is no improvement to the base speed, however as there is a reduction to reactor reaction time, there are no drops in performance as the engine is dependent on power. When you have the fabricator, deconstructor and medical fabricator all running at the same time you get power drops and the engine stops working.
This means your time from point A to B will be faster with the reactor upgrades. Not that your engine base speed will be faster.
I Have a full technical breakdown from speed running with this submarine available on my discord if you would like to know more about it :D
*Also this was recorded before the talent nurfing of tinkering, and the submarine did already have full upgrades purchased from a station.
@@IronicandDead Okay but in the intro line to the video you say:
"We are gonna be taking a vanilla Barotrauma Submarine, and modifying its core configuration to make it go faster, without touching the submarine editor, or buying the speed upgrades..."
It *literally* does not go faster, other than in the y, those were good points. The reactor spins up faster, meaning you don't drop load, and it accelerates faster. I suppose you could make an average x-velocity argument, but thats not what you said.
Clickbait.
@@TGCIIII well, depends on weather the submarine was migratory or non migratory of course. Laiden or unlaiden
@@IronicandDead disregard Cap, upvote