This kid really tried to pass this video off as his own, sat in his moms restroom recording his narration over the existing voice over. You can tell because the audio cuts out every few seconds and restarts again.
Ok let me engine 101 you ... The engine is the entire piece. They are showing you how an ENGINE is made, ok, not how a BLOCK is made. The title of the video is HOW AN "ENGINE" IS MADE ... not how a block is made ... The sad fact that none of you had my response does not say much for your intelligence, just that you are on his level of not knowing
Wonder if these engines get the obligatory 20 minutes of run time to break in the flat tappet camshafts, especially before dyno-ing them for max horsepower/torque readings.
This kid really tried to pass this video off as his own, sat in his moms restroom recording his narration over the existing voice over. You can tell because the audio cuts out every few seconds and restarts again.
calling rocker arms, valves and springs components that "regulate the pressure" is something only someone who doesn't understand would say to describe em.
No Torque plate being used, heating the connecting rod for pin installation & no clean room for Engine assembly basically! This is the wrong way in building a performance engine!!🤦♂️😑
You need to get your facts and vocabulary straight. Blocks and heads are cast, not forged. They're made in factories, not warehouses. Valves don't regulate the pressure, they admit fuel and expel combustion products.
I've never been more sure of something than I am of the fact the narrator has no idea how an engine works or even what an engine is. Also I can't believe the WOKE Business Insider used the word "Marriage" multiple times. CANCEL THEM IMMEDIATELY!
Huh? Marriage is commonly used as describing the process of joining two sub assemblies together. It's engineer fancy speak for assembly. There's nothing woke about it.
@@brandons9138 it was a joke, a lot of these newage woke hipsters are against marriage, they prefer life partners. So I was shunning them for even speaking the word.
I cant believe they skipped how the block is made in a video called how an engine is made.
🤣🤣
Lmfao
This kid really tried to pass this video off as his own, sat in his moms restroom recording his narration over the existing voice over. You can tell because the audio cuts out every few seconds and restarts again.
Right?!
Ok let me engine 101 you ...
The engine is the entire piece. They are showing you how an ENGINE is made, ok, not how a BLOCK is made.
The title of the video is HOW AN "ENGINE" IS MADE ... not how a block is made ...
The sad fact that none of you had my response does not say much for your intelligence, just that you are on his level of not knowing
They expects Normies soccer mom to watch this . Ended up getting raided by car guys
The audio seems a bit bad but good video overall!
Audio is completely fine, maybe your speakers are going out lmao
@@zachsawaya4071 nah he aint tripping the narrator's mic audio is not clear
@@slatt8667 no the audio is fine might be whatever you using
@@theraven_hyperx7529 no
It's not 100% clear/soft
There is echo
Clear your 👂s
Very nicely informative! A good start here.
anyone feel like this video could have been more interesting
LOVED THE VIDEO,
ALSO DO A FACTORY INSIDE VIDEO OF JAPANESE MANUFACTURERS LIKE TOYOTA , HONDA AND WHY THEY ARE SO RELIABLE
Their parts go through more extensive and rigorous testing which is why their cars are so reliable most of the time.
Watch Donut Media Toyotas secret to reliability.
So they straight up revvv tf out of that cold new engine?
Without oil it seems
Wonder if these engines get the obligatory 20 minutes of run time to break in the flat tappet camshafts, especially before dyno-ing them for max horsepower/torque readings.
I think Blueprint only offers a couple flat tappet cam engines, the overwhelming majority are hydraulic rollers.
Cmon guys !! Blocks are molded not forged
So you mean they make weak engines for cars that break down easily
Yes and no. Depends on the brand.
Testing an engine on dyno without engine break-in !!! And they tell us to drive slow when new !
😂
Engine isn’t going to break that easily
That’s what I always wondered about
You do know there is a massive load difference between the street and the dyno?
@@joker432 Yeah, I think dyno only measures how fast the engine produces torque right? It doesn’t put the drivetrain and car weight on it?
Nice !! closed deck blocks !! = lots of HP options
It’s a 2 valve v6 probably makes 200 hp
@@angelgjr1999they're 2 valve v8's
Making ~250hp low side to probably around 400hp-450hp guessing higher end.
Just looked up they have >500hp builds as well.
Imagine that
This is a small factory. But roughly how its done.
Oh crap, now I know who to blame!
Being a motorhead myself, I'd love to work there.
Me too
You got to be family related to a boss. It’s not easy getting into a nice union job nowadays.
nice way to start hating what you now love!!!
Enginehead*
Engine*
They use Moresa pistons !!
Made in Mexico !!
Pretty cool
Never forget about safety. Use Softgle Comfort
First time seeing a Piston Ring Machine
This kid really tried to pass this video off as his own, sat in his moms restroom recording his narration over the existing voice over. You can tell because the audio cuts out every few seconds and restarts again.
Literally
I'd like to see you do better
@@DA_BEAMERRRR I don't need to steal other peoples work better? I have a job lol
@@DA_BEAMERRRR Also I happen to be a certified aircraft mech, so yeah I could do better.
It gave some idea of this complicated process.. Good one😮
Do they make these engines for a Tesla model X ?
I think so.
@@normiukkeli3739 yea just ordered one
Impressive!
Interesting. Chevy. Ford. Chrysler.
Fantastic engine options 🤣🤣🤣what a joke
Better then garbage European engines that won’t pass 200k miles or the JDM engines that won’t make over 300 hp NA.
Have you ever had an Iron Duke or a good 350 engine even the 3600 V6… just name a couple legendary reliable motors. Stop it your bias is showing!
@@DelGTAGrndrs they aren’t what they used to be lol
How an engine is made. The blocks come pre made 😂
Now show us how the engine is made, the block. Geez
Kinda unique engine. I’m Europe we don’t have many engines without overhead cams.
Pushrod thing seems very compact
That last part made me mad lol
thank
Very cool!!
Quite the contrast after watching a video on AMG engines!
calling rocker arms, valves and springs components that "regulate the pressure"
is something only someone who doesn't understand would say to describe em.
0:30 are these modern designs or not? Only because the one in this shot has a distributor
lots of blueprints engines are old strokers or old engines
Is your mic a Pringles container?
And this is why we have recalls.
Wow this happens in my town lmao
No Torque plate being used, heating the connecting rod for pin installation & no clean room for Engine assembly basically!
This is the wrong way in building a performance engine!!🤦♂️😑
That’s why it’s made for shitty cars that break down fast
I know right
Rotary life's matter.
not bad
You need to get your facts and vocabulary straight. Blocks and heads are cast, not forged. They're made in factories, not warehouses. Valves don't regulate the pressure, they admit fuel and expel combustion products.
Exactly 👌🏼
They need a better script writer
They can be what ever they want to be, So they identify as pressure now a days. 🥴
And the combustion process doesn't push the pistons up and down. It only forces them down.
7:16 toretto 😂😂
Thats him 😂
Family
❤❤
And I have to do like 80% of this by hand lmao
Where is your factory
0:01 cmon guys get your heads out if the gutter!
Squirts vigorously..🤯🤯🤣🤣
Was it me or did they not pre lube?
they skipped that step in the video. You can see the oil filter on the dyno'd engine. I was hoping to see that part.
Oo
He said blueprint makes Chevy ford Chrysler they all have the same engine
Something about this video seems off
Its because they skipped how the block is made...
if they make both chevy and ford, then why do most chevys last long and most fords don't ??
Ah yes, the valves to adjust pressure in the combustion chamber
lol This is what they do. They have other purposes also but at the root, it's all about pressure. That's what valves work with (pressure).
I thought it too 😐😆
Worst ENGINE MADE...And THEY MADE 2 FOR ME RUN !!!! !!!
I can do this faster
..in Car Mechanic simulator 2018
I've never been more sure of something than I am of the fact the narrator has no idea how an engine works or even what an engine is.
Also I can't believe the WOKE Business Insider used the word "Marriage" multiple times. CANCEL THEM IMMEDIATELY!
Huh? Marriage is commonly used as describing the process of joining two sub assemblies together. It's engineer fancy speak for assembly. There's nothing woke about it.
@@brandons9138 it was a joke, a lot of these newage woke hipsters are against marriage, they prefer life partners. So I was shunning them for even speaking the word.
@@JackAceINC The internet really needs a sarcasm font.
@@brandons9138 _like this_
@@ajemajh That works, but I think it might be a bit subtle for some folks. Myself included.
Misnomer: Crap-Assembled
the person narrating this does not have a voice for voice overs. i’m guessing he’a a gay filipino man. lmao
Oof ford
Is this AMG
He said amd showed Nebraska usa
So it’s M ?
@@APAstronaut333 no it's blueprint
Hopefully the combustion engine will be in history books in 50 years.
Nah you probably drive a prius
@@DrunkenVtec close. A Volt and a i3
Depends
@@Nathan8441 good luck with the bolt
I put your mom in my history book
This video should be titled
"How engines are made for 3rd graders"
If you don't know this stuff already I hope you don't own or maintain a vehicle.
junk
How gas pollution pumps are made ", there I fixed your title.
They are still better than the pollution electric cars produce until around a decade after production.
There's always one. 😏
Found the anti-car guy
just get a tesla
@@ganaraj5016 hi
@@ganaraj5016 na
@@ganaraj5016 creep
na v8 goo brrrrrt
@@michaelcleary8560I understand your point of view, and GT-Rs are great. But if engines will cost lots of money just get an EV