iPhone 5S Screen Repair Replacement HD teardown Guide
Vložit
- čas přidán 27. 08. 2024
- www.iphoneshopu... iPhone 5S repair guide and tutorial. How to fix and replace your iPhone 5S LCD and digitizer.
********************************
PLEASE READ THIS: At 6:06 the home button plate is shown upside down, refer to 5:06 for the correct placement.
********************************
If you have dropped your iPhone 5S cracking the screen and thinking about repairing the screen yourself then this video is for you! You can't go wrong with this step by step HD tutorial. This screen replacement repair guide will walk you through the process from beginning to end. The most complete and best iPhone 5S glass screen dis-assembly and assembly tutorial on CZcams.
iPhone 5S Complete front assembly LCD and Digitizer (Black)
iPhone 5S Complete front assembly LCD and Digitizer (White)
iPhone 5S Pentalobe Screwdriver
www.iphoneshopu...
iPhone 5S Phillips 00 Screwdriver
www.iphoneshopu...
iPhone 5S Plastic Case Opener Tool
www.iphoneshopu...
iPhone 5S Suction Cup Tool
www.iphoneshopu...
iPhone 5S Printable Screw Organizer Sheet
This tutorial will work for iPhone 5S
Head over to www.iphoneshopu... for all your iPhone 5S parts and complete iPhone 5S Do-It-Yourself Kits. Use coupon code CZcams for 5% off your purchase.
Like Us on FaceBook: / iphoneshopusa
Follow us Twitter: / iphoneshopusa
Google Plus: plus.google.co...
Pin Us on Pinterest: / iphoneshopusa
There are a few details missing. Under the front camera there is a rubber piece, as well as the clear plastic lens aligner piece. These need to be moved to your new screen. Pay close attention to their orientation during disassembly.
The battery connector popped when I removed the three connectors attaching the digitizer to the main body. Make sure you check it before reassembly.
The metal home button backing can be installed in the wrong orientation, I had mine spun 180 degrees and the home button press was wonky.
Holy shit thank you I've been looking for why my touch id is fine but the home button is finnicky and wont work after reassembled
People pin useless thank you comments meanwhile I gotta skim through comments of multiple vids just to find details cos noone wants to admit their videos aren't 100% perfect smh
where I the battery connector ?
*******************************Make sure all screws go back to the exact holes they came from. If the 4 screws used on the plate that covers the cables are mismatched it can destroy your phone. These four screws are different by millimeters, you can't see the difference with your naked eye. ***************************************
@@disk0__ music
thank u soo much, I just fixed my phone, I'm sooo happy because I knew I wouldn't get a new phone yet lol
Lol same😂
Quickest Easiest video yet. Took me about an hour but went step by step with you. Thanks!
Worked like a champ My 14 year old & I followed this and I have a great success! Hamm's light for you, sir!
This video has been a GREAT help , with close up detail , and a nice clear voice, many thanks
this is the most accurate and very clear video replacement for Iphone 6s. thanks for this i had no problem with mine.
i noticed a mistake, if you dont mind me mentioning, starts at 6:35, when reassembling and you are installing the third screw for the home button/fingerprint sensor, lcd back plate, once you tighten the third screw, the little tab beneath the 3rd screw that you tap quickly 4 times(tab,ground?) with the phillips screw driver, should be positioned on the side closest to the lcd back plate, it needs to be turned either clockwise or counter clockwise so where it is contacting the backplate mounting hole as opposed to the ribbon cable, displayed at marker time 6:46. this is a fleeting mistake that would take a very critical eye to notice if only being a first timer replacing a iphone 5s screen,
thank you for your time composing this video, many will benefit from your efforts
the trick to replacing the home button /fingerprint sensor seen at 9:30 and its cover is to move the bottom of the screen slightly to the right, then you get full access to the connector rather than through a small gap as shown here, great vid and tutorial all the same cheers fella
+Ian Matterson exactly correct. That's how it's designed to assemble.
Hi David,
thanks for the video tutorials, excellent filming and narration 10/10 fella.
Ian Matterson this is a very important question. Will the home button still work even if u don’t attach the finger print scanner cable to the board mine is broke and idk if it will be sent with my screen and digitizer
Just now, successfully replaced my hot Chocolate dipped 5S with a new screen(bought off Amazon for $14) without any trouble. Since the hard chocolate hardened few screws, ended up in exposing the opened phone with mild sun light as the screws are real tight. Rest is just step by step as your video. Very simple, neat and useful video. Thank you for your time in adding this video to the youtube
I had to open my phone again as the orientation of the home button cover plate on this video was wrong and I could not press it. My phone would not power on till I corrected this. hope this helps anyone who runs into the same problem. Phone works great now.
Mathew Webb I noticed that too!
for your video. it helped heaps. saved me having to pay someone else to do something I could do with a little help.
Thank you so much 😊🙏🙏 I watched your video twice and every step during the repair. It worked perfectly. Thanks again for posting such a useful video. I struggled in first step while removing the front cover glue was very strong then had to use hair dryer to melt the glue a bit (tip for others). My 5S looks great like new again 😄
Wow that is some fiddly work... Daughter dropped her phone and I heard that sad crystalline sound... She did make it almost 2 years before breaking it. Ordered the replacement that came with tools (good thing), watched your video twice and dug in.
The screen was cracked down to near the home button so getting the suction cup to work was a bit dicey, but I finally manged to unsnap the screen. After that it was step by step disassembly with your video. As mentioned, there is an aligner piece for the front camera. I was a bit concerned it was not lining up in the window and found the plastic ring. Getting those little screws back in those tiny holes was an exercise in patience and fear that one would launch itself "somewhere in the room". Got it. Done. Daughter is happy. Wallet is happy. Thank you SO much for making the walkthrough.
If your screen is shattered use packaging tape and cover the entire screen before trying to use the suction cup. It works!
just fixed my phone, great tutorial, thank you!
ekranın yarısı çalışmıyordu şimdi hiçbir yeri çalışmıyor sağolun çok işe yaradı
it wasnt work half of screen but now completly broken soo thx
This has been a GREAT GREAT GREAT help to me. Thanks a lot. You saved my mobile and money.
just replaced my iphone's screen thank you so much!!
Great help, replaced the simple screen , R/R all the bits, no worries, thank you.
Really nice camera work you should turn pro, keep the screws in order spaced a part guys.notice the last screw on the screen cable cover isn't magnetic and isn't on earlier iPhones.
11:43 when securing screen to chassis I'd recommend not using your finger s like that, v it s easy to crack v the screen that way, once i got it secured in its slot at college the top and it looks good on sides i turn it upside down on soft cloth on hard surface then you can apply some pressure, it will be distributed evenly and but ask in one place on edge of screen , this it's the safest way I've found after doing hundreds of phones i learned this early when i go cracked a new screen like this
Just fixed my phone, this video really helped out, thanks 😀😀
Chelsea Brad
i tried but it didnt work infact it made mu iphone bad and worsten it
@@janbenko9161 I it up
S
@@janbenko9161 hola
Great tutorial, Help me loads, like the bit, replace the camera, then skips, that was fiddly. Thanks
make sure you put the screws in the right positions for the plate cover for the lcd if not placed in the corect holes you will damage the logic board
thanks very much, this helped me repair my wife's screen. Thanks again!!!
ATTENTION! The screws for the protective panel of the LCD flex cables MUST be of specific length. Otherwise, if you mix them up you can damage the traces on the pcb causing "the blue screen" boot loop. You can print a layout of your phone to keep track of what goes where.
There is a video called "Classic 5s long screw damage trace repair to solve blue screen of death" by iPad Rehab with more info.
Thank you very very much! You just saved me about 100€. Very accurate guide!
Thanks, this video done the trick, a Blue Peter badge is headed your way.
WARNING: Be careful when removing the front camera as showed in the video (I sensed I was gonna have trouble with it by following the procedure showed here, so I watched some other videos to make sure how to do it properly). Besides that, it's a great video and I replaced mine mostly following it.
this video is better than the one labeled "the best"
the time on up-close images is better -- even though the HD and lighting wasn't as good the angles and longer, reasonable, duration are better on this one.
I'm watching this on my broken phone😄
Same
SlickSkillzHD same
Same
love it!!!! step by step, easy thank you very much!!
Thanks your'er a lifesaver. Real help. Now my iphone 5s is a back together.
Ryan Johnson yz
Should you remove the battery just in case any power could go to the cables that you propped off in the top right?
If I use the front screen from another iPhone 5S, is it necessary to remove and reattach the original fingerprint sensor and other front panel components? Or can I use those components from the new front panel? It seems unnecessary to detach them if the new front panel (from another phone) has them installed.
Keep em. Most screens don't come with those parts.
the Touch ID sensor is linked to a chip. this chip is dedicated to this single iphone-logicboard. it won't work.
Awesome Tutorial. Clean and neat and to the point.
I lost the screws when taking out the ear speaker. when the assembly popped the two screws went flying!
I couldn't find them so I just used one that I took from the other side of the case
One thing I would like to add, make sure to pay attention to the front face camera. The little rubber around the lens likes to come off and slide over the lens when messing with putting the speaker back on. You can look from the front through the hole where the camera see's through to make sure it's lined up properly. Had that one problem, hope it saves someone else time.
Other than that, great tutorial! Saved me over $100 sending it off to apple to do what I can do at home with a $15 kit. :D
Thanks a ton ! just fixed my phone !!! You are awesome dude :D
My screen only came with glass. that is it. it doesn't have that black thing on the back. Really upsetting because I spent my own money and it took longer than a month to come. Help?
after turning my phone back on, half the screen was darker than the other, like a shadow kinda. any advice? please help
buy a new phone
At 6:23 you have inserted the home button bracket the wrong way round. You have also inserted it upside down; the cutout should be on the right.
I have my iPhone but the screen on the left edge side is bent. How can I flattened it out? Is there a trick?
Thank you so much this vid really helped
What do I do if the screen I ordered came with a home button, camera, and ear speaker???
I followed all the steps and everything works fine except the top part of my screen won't stay flat. It raises half a millimeter up, and I've taken it apart and put it back together numerous times, but it just won't stay flat. I can push down on it and it will depress. Everything still works, but I'm sure it is more susceptible to water damage the way it is now. Any suggestions?
Hi! İ have iPhone 5S. Listen carefully Produkte comes back by a slight sizzle knows what it is? Can you answer the friends who know?
I am not able to remove the LCD back plate screws. The screwdriver just spins and im worried about stripping the screws.
Is this going to be worth replace my screen when my screen is loose
quick question guys. the copper sticker that's on the display got broken. I bought a new one but i can't find it's place. where should I stick the small end end of it? Thank you
when I did it the front camera cable was disconnected so the cable is broken can they replace it
@cjwater2001 I don't think so bc the 5s has the print sensor so I doubt the home button cutouts would fit
some one pulled the connections apart on in side what do I do
I've ordered the Iphone 5s screen replacement and I'm on the touch button part. Something is really weird because the spacing of the replacement case for the home button rivet cable is smaller than compared to the original cracked screen. What do I do? Also, the screw for connecting the home buttom rivet cable with the metal plate doesn't match up.
when are you gonna have more 5s repair kits???. my screen is jacked up rite now.
my touch is completely not working and i have line on the bottom of the screen which is always fluctuating by showing some part of topmost screen.....what all parts should i buy to eradicate my iphone problems?..... PLEASE HELP
Head over to iphoneshopusa and grab the 5S screen repair kit bit.ly/2mGqA1R
For people having trouble with iPhone not turning on after the replacement: After attaching the new screen, I tried to power it on and it worked fine, then I started trying to fit the screen in place and did not seem to succeed, so I kept trying and decided to test it again after a while. It didn't turn on and I was very worried. Only thing I had to do to solve that was disconnecting the battery and reconnecting it again (as suggested on this topic: pt.ifixit.com/Answers/View/179573/iPhone+won%27t+turn+on+after+screen+replacement#answer185506).
What about the night shift ?? Can it be turned on in the new sceeen ??
I ripped the touch id cable but, followed the rest and did it correctly, now neither screens work. Is this due to the ripped touch id cable?
Awesome tutorial .. Done my 5s screen, home button has less play in it now (I prefer) and although the gold camera tab flips out I find it sits back in position on its own and wont stray once secured... Also lost a screw for ribbon plate casue it wasn't magnetic and too fiddly for me... pinged off and found after closing screen back up (facepalm) works though and that's main thing... Top Thanks
Hello,
I replaced my iphone 5s screen and afterwards the phone would not turn on. I checked all the connections but no obvious problems.. Any advice?
Thank you,
Anton van As
just ordered some speaker parts for my sisters phone.. same day shipping... thanks
Muy buena calidad de vídeo, y los pasos a seguir muy detallados, gracias man.
Thanks
In my iPhone screen is open from camera side
What to do?
What happens if you remove the LCD the wrong way from the left?
Ganyan pala yan , galing naman ... god bless po
So... I busted the pins that connect the ribbons... Any advice? Can that be fixed?
great walk-through! Thank you so much
Help! i got vertical blue lines after replacing the screen, what's wrong?
Iam making my iphone , thank you
Ive lost the shield that goes over the home button/finger print cable connector is it overly important?
i mixed the 4 screws holding the lcd connector cover up,can anybody tell what size goes were,cheers
when i try to changed my screen, at first the phone was working but it was not clear than when i connected it again ir stooped working , do you if i would have damage something that stop it from coming back on ?
This is 3rd video in a row that they don't show changing the camera holder ring and small rubber piece. So this means the camera will flop around. If your going to do a detail video then don't leave out the details.
will it remain waterproof after the screen replacement
sameone help me my iphone crashed and did not want to call any more
I fixed my screen but then I went back in the phone and a ribbon cable ripped and the screen isn't working any help please
The left corner of my iphone 5s is popping out. And i see already white light. What should I do? My phone still working but the corner is slight open. I see the light already. Please help me :(
Is the silver backplate the backlight, or is that in the package itself?
Hello plz can U upload video replacment motherbOard iphone 5s. Thanx
i did this but half the screen is now a shadow? can i fix this?
My touchscreen seems overly sensitive when I try to type anything. Can't do shiet. What have I done wrong?
iPhone 5 no fingerprint scanner ribbon at the bottom iPhone 5s does so becareful with the 5s
is it possible that I got sold a faulty screen ive done everything on this video like 3x? my screen stays all black but its connected to itunes thru my computer. heeeelpppp!!!
you put the home button back cover shield on upside down
My iPhone 5 is not touching and flickering what should I do please help me😭😭😭
at 6:46 on the screw the little clip fellow stays on the left of the screw look back at 4:53 good work though i barley seen this little clip myself and just noticed i´m currently following your video its like surgery lol but thank you
The screen on my iPhone 5s that I bought used has a screen that is slightly raised on the upper part. Did the glue come off on the upper part or do I just have to push it down? The screen also feels loose on the upper part specially when I push on the corners. Any help and/or suggestions will be appreciated.
scenario. when you plug all the ribbons in and screen doesn't work
what do i do
is this the same for 5c ?
what happen if i dont remove the red sticker?
5:56 ???? how did you put in, the NEW screen???
You put the home button metal plate backwards
Will you have all your pictures and all your stuff that is still on the iPhone .?
ya as long as u don't rip anything from the actual phone
thank you for the tutorial kapatid, keep on sharing
Tutorial en español por favor ...gracias
my I phone 5s did not power on you tell what problems may be
please sir
Need help soon! The sticky square piece that sticks to the lcd backlight shield ripped off. What do I do and order? HELP FAST
What did you do
that sticker is supposed to be removed you are fine. it's only for oem and proof that it's a new part. do not worry ok.
Please make that notification at 6:05 a little earlier, I literally had to spent an extra 10 minutes unscrewing it again.