DAB+ VW Passat - Integrerad DAB i RNS510 (installation)

DIREKTLÄNK TILL PRODUKT: www.eftermontering.se/dab-tun...
Installationsvideo på montering av DAB+ interface i Volkswagen Passat. Komplett kit finns för beställning via www.eftermontering.se för både Volkswagen och Audi. Se www.eftermontering.se eller kontakta oss för mer info.

[@peterkawa]

Thanks!! I was wondering how to remove the side panel of the windshield. I found the screw behind the "airbag" thingy, but then I didn't want to apply too much force on it. But, with "brute" force it works ;-)

[@Zerohunt3r]

Must the RNS prepared for DAB+ or works it with the First RNS without RNS preparation ??

[@petarsamardzija9339]

Hi, would this solution also work with Discover Media Pro MIB2 devices for PQ platform?

[@markloganvw]

Why would you not remove the pillar trim and save all the feeding issues ?

[@eftermontering]

To avoid pillar trim re-mounting hassle.
However this is of course optional.

[@magnusdahlnorway]

Kan dette brukes på 2016 modell passat gte?

[@eftermontering]

Hej Magnus,
För Golf 7 och övriga MQB-bilar finns andra kit tillgängliga på eftermontering.se

[@davidwendland7111]

Hallo habe es bei meinem Rns 510 eingebaut ,nur der Empfang ist schlecht und er verliert schnell den Sender
Muss man noch irgendwas frei codieren oder brauch ich einen splitter?
Vielen Dank

[@Moriggia]

Hello, can i put it in the top center without to lose signal? Because i would prefer to not see that :) thanks

[@eftermontering]

You can also mount the antenna in the rear window.

[@Benko_DieseL]

Is this eveything on passat b6 retrofitted?

[@EKatallozi]

Should be similar to B6 but in video its a B7.

[@rene.s.poulsen]

Hvor kan dette modul bestilles i dk ?

[@eftermontering]

Hej Rene,
Du finner mer info om hur du beställer till Danmark via följande länk
www.eftermontering.se/img/cms/CMS/international.pdf

[@emotio2008]

Airbag

[@eftermontering]

?

[@BlondynCh]

I wish this was in english

[@Evan-memo]

You don’t need language just follow what he is doing it’s simple even by talking doesn’t make difference just follow what he is doing and that’s it

[@Ben-jw3np]

This guy is showing this video on wrong way, you dont need half of these parts as he was showing, I have done retrofitted rns510, my car came with Rns315, so what i did is bought Rns510 just unit, installed unit on my car, hooked up with xm connector, am/fm antenna connector and blue connector for gps antenna, after that i coded rns510 on vcds, and everything does works, bluetooth works same as the factory rns315. Now i dont know why this guy was buying modules, its necessary part.

[@J0HNWICK]

Tooooooooo expensive! For 500 Euro, I get a new fitting radio with dab and everything!