JOHN DEERE COZY CAB METAL FABRICATION WORK
Vložit
- čas přidán 21. 08. 2024
- JOHN DEERE COZY CAB METAL FABRICATION WORK
merch = teespring.com/...
/ stevenlavimoniere
lavimoniere productions llc
subscribe to my channel
/ @stevenlavimoniere
lavimoniereplum...
Fellow plumber here. I recently bought a MIG welder and plasma cutter, going to do some work on my old truck. Good to have multiple skills. Nice work, Steve.
The old saying a grinder and some paint makes me the welder I ain’t lol
Good job looks great 👍
Good to see the other side of Steve Lav. with his tractors and tri-fives and other cars too.
That light is really bright!!
Man! You have all the toys! Wicked Cool!
Great job on CZcams all videos
Careful with those sparks on your shirt, it can catch on fire. Ask me how I know LoL
This is great! Thanks for bringing us along Steve!
Steve’s going in raw mama no protection needed
I didn't know you had a 50s car back there! So much potential for your channel. You could retire today renovating your house and working on the car and you'll still have a channel for another 10 years with both the same entertainment value yet diversifying interests.
nothing like the smell of fresh grinder sparks in the morning smells like victory
You Steve sir, are good man and you doing a great Job. Have a nice Day
Greetings from GER
Fab work ! A welder friend would have used a flap disk and removed all of the rust areas prior to cutting as he hates to weld on rust.
Not a problem here...hope you have some matching paint to go over some primer. Good enough for the neighborhood !
STEVE is working again mamma next level next level
Neck level
So much more fun and rewarding than fixing the same old crap on boilers.
Jack of all trades master of em all. Well done as usual
Nice weld job Steve. A nice steady bead with good penetration. Nice plasma cutter too. Gotta get me one of those.
For cleanup, the emery cloth flapper wheels for the grinder works fantastic.
Those welds look real good you're going to have some fine piece of equipment you got heaters for them cabs nice video thanks man
THE CAB HAS A HEATER I MIGHT HAVE TO FIX THE CORE NOT SURE YET ..
The man can do it all.
Steve all that sheet metal work experience you have with HVAC comes in handy! Almost ready for the hoist and then bolt it down.
Do I see a 55 chevy and nomad wagon ? Been holding out on us lol . Let's see some camera time on those sweet machines .
Ampature: The size of the hole through which electrons flow in a conductor. Increasing the ampature allows the conductor to draw less ohms so more electrons can get through. Compare to Aperture in a camera lens. Increasing the aperture allows more photons through the lens. Great videos Steve!!
Great job Steve. I appreciate your videos and what I’ve learned over time. I DIY a lot of my own stuff, but recognize when to call in the pros. Never had an indoor plumbing mistake. Only time had a mistake, flooded the yard and run the well dry, three weeks after fix! I will never use a female pvc fitting on iron pipe. Split later. Glad not in the house. House is all copper, keep it the same, and I have no fear sweating copper pipe since a plumber taught me many years ago.
They make female pvc fittings wrapped with a SS band for situations like that...
As Andrew might say..... "Slightly unprofessional but not unacceptable"... Great job Steve !!!!!
It's cool how all your plumbing skills transfer to your Pole barn skills, and I'm sort of guy La douche with my pole barn skills, but. hey i have a job.. the other thing going to say is, I can hang out with southerners, but somehow, I click.
You and me... we're the same, you and me... LOL
i sah some nice antique cars in the back
Electric glue ⚡️😁
Yeah I like watching these videos Steve thanks a lot buddy
Good job Steve awesome work Primo????
God Family Country USA 🇺🇲🇺🇲🇺🇲🇺🇲
Rio Grande Valley Texas USA 🇺🇲🇺🇲🙏
Happy Holidays 🎉 God bless America 🙏🇺🇲
I got flashed!
Awesome video Steve.
Glad you had a fixa mama.
More more more.
Thanks for putting some tractor videos on your channel! I enjoy the process you take to repair them!
Awesome video, keep the John Deere videos coming!!
Nice work
Steve the tractor man, she a leaker!!
I'm really enjoying these videos!👍🇺🇸
if you cut half way through the material where you want the break line you can easily bend it in the vice then just weld the split and round it over with the grinder
Who said plumbers couldn't weld. Nice work
Nice fab work there Steve. It won't be long and it will look brand new - probably better.
i think you have some tractor fans here, including myself. i have a 87 yanmar 226d with a JD cab on it.
Great job Steve.
Great video Steve! That’s a good looking 55-56 Chevy tell us about them some time. Thanks for the adventures on the tractors very interesting! Bullet Bob from W. Texas! 🤠🤠👍👍😃❤️
😊
Good to see that you're wearing gloves.
Good little series you got going Stevie Boy ... Interesting work ... Thx for posting ...
Steve's fabbin again - next level!
nice job
Nice garage and collection man. Ffs, put a guard on that grinder.
Steve you done a fine job there Jack of all trades master of all I know she got some antique car sitting in the back do a video on them one day let's see what kind of cars you got there take care
These side hobby vids are great
Really impressive great skills
Amazing job
Nice job , But I wear long welding gloves to prevent ark burn and sunburn on my arms from welding .
Welding is so cool, I have a log splitter and wood stove that needs something but I dont have a welding machine
Nice work Steve
I would have sanding more of the paint off before welding, but not a bad job for a plumber..lol
Fantastic job !!! Steven , i did enjoyed very much that video
A man with many talent , good approch to deal with this. PROJECT
I have the cheapo HF wire welder, but the cheaper AC one. Mine splatters and doesn't lay nice looking beads like your DC welder. I did pick up some premium Lincoln wire which should help. I see that you use the same safety cloths that I wear. One time I set my flannel shirt on fire. I liked that shirt.
Nice chevys in the background. Love your chevelle.
Steven, Great change of pace.
All you need for Christmas is discs for the grinder! 4 1/2 inch? 🎅
Salt is good for melting snow and ice, but it is pretty rough on metal.
STEVE IS WELDING AGAIN MAMA!!!
Steve
You have john Deere fever
For the used suff
Greg
I was looking forward to this
Just propres that haha
Aint one to bash but a guard or face shield should be in place. Safety first. Have a good day steve enjoy your content
20:04 I hate grinding inside, especially with lots of stuff around (which is all the time)!!!!
Hello Steve!
Nice 55 Chevy
Must be trying to weld rusty thin steel.
nothing like multi skilling
55 Chevy ?
Steve, you need a sweet honey to ride along with you in the cozy cab!
Hey Steve, is there anything you can't do with those golden hands... Great stuff!
Steve's a fabricator yall
Afternoon Steve How is the truck coming?
IT NEED A TURBO ITS ON ORDER
thanks for letting us in your shop. how do you like that harbor fright welder? the 215. can it tig and stick?
ITS A STRAIGHT MIG WELDER . I HAVE ANOTHER MACHINE FOR STICK AND TIG IF I NEED IT ....MIG IS THE WAY TO GO FAST AND EASY AND PORTABLE
Hi Steve
There’s a John deer with a bagger on Offer up offer for 400
Where do you buy your metal? Is there a Metals Supermarket near you ?
Amazing, Steve! How do you manage to plasma cut such a straight line? They are ruler-straight.
3:33 Propane "B" tanks instead of acetylene? So much lighter tank.
I swear watching you run that grinder scares the shit out of me
That a 55 Chevy in the corner Steve?
What ever happened to all those Trackless snow units you had? Did you fix them up and sell them?
I think he fixes them up and keeps them! I caught a glimpse of one of them on his last video. Sitting right outside his garage.
you think when you paint it we will know lol
No PPE while grinding?
What wire are you running in your flex core?
good stuff here steve......if you like metal fab stuff check out waldos world.....guy built a plow from scratch and it was cool
Steve what welder are you using and what type wire
HARBOR FRAIGHT SPECIAL... .30 WIRE WITH SHIELD GAS
www.harborfreight.com/migmax-215-industrial-welder-with-120240v-input-63617.html
My comments are being blocked trying to say thanks
i recieved it