How to change the valve cover gasket on a 2013-2016 Dodge Dart
Vložit
- čas přidán 22. 08. 2024
- paid links
valve cover gasket: ( fits 2.0L )
amzn.to/3IpAPlD
valve cover gasket: ( fits 2.4L )
amzn.to/3KHubtE
valve cover gasket: ( fits 1.4L turbo )
amzn.to/41TnPOM
ultra black rtv:
amzn.to/3m4pHTR
3m dielectric grease:
amzn.to/3m1wsWq
Never seen work done so precise and clean. You've given me the courage to do some repairs myself.
Thank you so much.
I replaced the Catalytic converter yesterday and I noticed some oil dripping down near the cylinder wall so I figured the valve cover gasket has to be replaced, now that I watched your very detail video, I feel like I can tackle this job as well, thanks!
Thank you so much for the great feedback , hope all goes smoothly.
This helped me out so much! I’m going to do the valve cover gasket and tube seals today and this is going to make it a million times easier 😊
Great to hear! Thank you for the feedback.
Hey man great video, but I wanted to tell you, 99 percent of the time there reason that there is oil down in the ignition coil tube is because the oil was poured too quickly during an oil change, leaks out of the fill hole, over to the coil area and down into the coil tubes. It is very easy to fill the oil too quickly on these cars
You did a spotless valve cover gasket replacement on that 2.0 Liter Dodge Dart engine!
Thank you so very much.
Wish me luck. Thanks for the video. Going to change mine now.
Hope all goes smoothly , thank you for watching.
This was perfect!
Thank you for the terrific feedback.
I watched your video and it was very interesting and professional. I know it is edited so will you please tell me about how much time it took you from start to finish to complete the job? Thank you in advance
It was about 2 to 3 hours the best I recall. Thank you for the great feedback.
In the near future I will be going to have that work done and it is a great knowledge to me to know approximately how long the mechanic should charge me for the work he tells me he charges $95 an hour and that is not small change for me! So finding your video will be extremely beneficial to me I believe thank you
Sorry that voice will not let me add punctuation
Good job thank you 😂
Thank you for the great feedback.
Great tutorial! I was wondering what you used to clean the valve cover? Is it just a degreaser and a rinse with water?
I usually get the purple cleaner and then rinse it. I have also used a pressure washer . Thanks for the feedback.
Can I remove the foam insert behind the head covering the injectors without any consequence?
Mine actually ripped after a few times of working on the car and I threw it in the trash. I don't think it serves any purpose except maybe diverting any water or debris. Thanks for the feedback.
I think it’s in case the fuel line next to the purge line or the injectors leak ….
what was your symptoms my dart has very pore acceleration on the highway i have to floor it to get it up to speed same as leaving an intersection which can be dangerous because of such poor lack of acceleration it seems to be way worst on hot days any ideas ? great vid by the way
I would change the coil packs first , I know I had a similar issue and seen great improvement. Of course change the spark plugs also if they have not been done. Thanks for the feedback.
Hi we're looking to replace the gasket on my Dodge dart but we're having trouble find a gasket that fits where did you purchase this one?
Sorry for the late reply , I purchased mine from amazon , links are in the description according to the engine size . Dart has 1.4l , 2.0l and 2.4l. Thanks for the feedback.
Is this the dodge dart aero turbo? If so where did you get your gasket I can’t seem to find no parts for mine and it’s getting frustrating
Here is the 1.4l turbo valve cover gasket with the tube seals. Thanks for the feedback.
amzn.to/3RTmS46
@@s33therfan awesome preciate it man 🤙
What was the name of the brand of gasket set you used?
The DNJ in the description is a better brand but here is aftermarket I have used as well.
ebay.us/kCbJZF
@s33therfan also was the use of the Grey gasket maker, something that you have to do?
👍👍👍😊
Thank you for continuing to watch and the great feedback.
👀👍✔
Thank you as always for watching.