There are millions to be made from this business. I just take a small branch of a tree and start
Vložit
- čas přidán 8. 04. 2024
- My 2nd youtube channel / @diy1
Subscribe to the channe clck.ru/35QjHMl! It is very important for me! Thank you - Jak na to + styl
Subscribe to the channe clck.ru/35QjHMl! It is very important for me! Thank you
Wood and fire. What could possibly go wrong? 🚒🚨🔥
Watch the video with your eyes and try googling what liquid sodium glass is, it's what I coat wood with to prevent fire.
Sharpen your forstner bit and immobilize the wood as your drilling it. A cheap drill press vice would work fine. The reason you're having such difficulty hollowing these out is because the wood is bouncing around.
And to all the people who think these are fire hazards... All candles are fire hazards. Wooden candles aren't any more dangerous than a glass candle.
Thank you so much for the advice. Also thanks for the explanation with the candles. A lot of people don't understand the simple things.
Let the WORLD KNOW when you've made your FIRST Million...
Money likes quiet, buddy.
I had one candle in wood years ago . I thought they had been made illegal. I about burned down my apartment. The whole thing caught fire like a Roman candle. Be careful!!
This candle will not ignite as it is completely covered in "liquid glass". It's a solution of sodium silicate. Which is an excellent flame retardant. And your candle caught fire then because it was not treated with anything, the wood absorbed the hot wax and began to work as a candle wick, that's all. And in my version, the wood will not absorb anything and plus the coating itself is not flammable.
I agree with you. It's a fire hazard and diy-wood will probably kill people with it. Should be banned outright. Stupidest idea on youtube, imo.
I guess you can't help ninny-nannies without stifling innovation, progress, industry, productivity, and the economy. Socialism for the win! *sarcasm*
@@michaelpriest6242 ... you should definitely burn candles in wooden candle holders every day, as long as you burn down your own home and not an entire apartment building, you silly soyboy ninny-nanny billy-boob. Hah!
Loool 🤣😂😅 Who invented fire ? Some bright spark 😄
Thanks for the clarification, that the initial coating is fire retardant. That makes all the difference 👌 👏
I've already written an explanatory clarification above in the comments. About what I covered the wood with. It is liquid sodium glass. It is a very good fire protection. After treatment with this product, it is very difficult to ignite the wood even with a gas burner
some call it water glass
@@johnduch2815 Used to stop radiator leaks in olden times.
Have you looked up the word retardant? It doesn't stop the process, it delays it. The wood will catch fire eventually, most likely when you're not paying attention to it until you curtains are on fire.
Its amazing how many back seat drivers (key board warriors)are making comments without understanding the full extent of how’s he’s manufacturing these candle holders, he’s 1st lining the interior and rim of the wood candle holders with liquid sodium glass to prevent and spreading of the flames!
Thank you friend! So far, you're the only one who's figured out this simple technique. The rest of us are probably either watching the video or just don't even understand what liquid glass is.
Unfortunately, go to any comment section on any channel and notice all the jerk comments that are posted.
@@diy_wood you’re welcome, I believe in straightening out the record, ethics, and social justice as well, this word is full of people who don’t have a clue yet speak out when they don’t understand much of anything in this world to begin with!
@@natureboy123 Yes, unfortunately
@@diy_wood I've never seen Liquid Glass like what you used in the USA. That's new to me.
Very nice! I’m going to have to try this. I don’t have all the fancy tools, but I like doing things the old-fashioned way by hand.
Thank you so much. You're cool if you can do things with your hands. I don't have that kind of time.
Those fingers get pretty close to that band saw blade.
I'm careful. I've already had cases so I know what I'm doing
Right you saw that I hollered at screen watch those fingers
How "careful " were you when you got that black finger nail ? 😮
The teeth aren't on the back of the blade
No you don’t. Or you’d just bump it with the next one
Well I made 42,000 of these and have sold about 38,233 so far. cost me $.32 to make each one and I sold them for $22.76 each, that's $870,183.00. I will have sold over a $1million in the next few minutes, Thanks for the great idea!
You're doing great!) Way to go)
Yea, right! and I'm the king of England!
@fintronics Greetings your majesty
B.S.
@@fintronics Hope you beat your cancer battle
Great Health & Safety video!
Yeah
Perfectly Prepared Examples 🙄😆
I was thinking the exact same thing when I saw him reaching for the pieces next to the saw blade running. Bye bye digits😮
I have a piece of Aspen from my childhood in the 60’s that I saved from my childhood as a sort of bookend but it’s more of a wedge. We don’t have Aspen trees in our state. I think that I will do this but that I can use it to insert a small glass candleholder.
You may well be able to make it out of any wood. In the video I made it out of willow. And we sell these candles out of oak. Completely dry.
@@diy_wood I wasn’t trying to disparage your work. My wood piece is over 50 years old and even the heat of the glass would concern me as I would hate to have it damaged. I loved your idea and the natural look of it as you created it and wish you all the success.
Thank you, it's reciprocated!)
Nice work! Carbon felt would give you a permanent wick making the candle reusable/ refillable with more wax. Jeffrey Z. in SC
Thanks for the idea. But we make this candle exclusively with cherry veneer wick. Allegedly a completely eco-friendly candle)
Your hand gets close to moving blade. Non safe wok method! Use a push stick to clear bladed work area! Keep your fingers!
thank you for worrying about me. it's nice for me
Never wear long sleeves when using power tools!!!
As a child, we frequently visited Branson Mo, Lake of the Ozarks and that territory. I have a cabinet full of walnut bowls. And I cherish each and every one.
You're doing a great job)
I used google translate on what I thought was polyurethane, and is translated to Sodium Liquid Glass. i've never seen a wick of a candle made out of thin strips of wood. I'd like to see one of your candles burning. Thanks for sharing!!!
Wood wicks are the best.
@@maggietaskila8606 it's very interesting, I'm sharing this video with my friends who make their own candles.
thank you for watching. I was glad to help you
They have wooden wick candles at every store, yet they are in glass holders cause ya know combustibility issues with WOOD candle holders like this genius made.
@@itscalledfreedomofspeech5019 He used a fire retardant on the piece, that what he was painting them with.
I did that one Christmas Many years ago. Great gifts and sold out as soon as I made them
You're a smart girl and a great job! I love handy women!
I also USED to make these. I made my millions and franchised.😊
You're handsome! Well done
You should really drip some water on your forstner bit. It’ll help keep it cool, cut better and last longer. Great video! 👍👍
Thank you brother 😎
We have millions of tons of felled trees in Houston in our neighborhood after a tornado hit Houston last week and I was wondering what creative products could be made from the trees....this is an interesting idea but we have 3 ft diameter trunks as well as small limbs. Anyone have ideas for them?
The solution used is known as “Water Glass” and is, if used properly, fireproof.
I think I might suggest painting down the outside as well but …
I’d suggest maybe a sharper Forsner Bit
Yes it is, I paint the whole thing inside and out. After drying, this wood does not burn even under a gas burner! The drill bit is already dull, it's very hard to sharpen them.
Nicely done, the difficulty is to always find new customers.
you're wrong. sells well online
I would imagine at some point you won't be able to keep up. Great idea.
These work really well in a camping tent.
and they smell good too
Very good idea, thanks.
Thank you brother
I might rig myself a "stop" fence to simplify cutting and consistency
Sounds good.
so beautiful. I want to make some now.
Easy and fast!) You're welcome
Thank you nice work.
❤️👍
If your business takes off, you should learn how to properly use a forstner bit. Looked like you were just burning the middle of the wood out.
And you try drilling the wood along the fiber. The softer, more fibrous wood. You'll be surprised when even a new drill bit won't drill.
I am referring to the speed.
Some of these made to burn oil would be great. A small metal wire insert to hold the wick or cloth right above the oil. The bigger the wick like a piece of cloth the brighter the light and omg so much safer with little kids and pets if knocked over.
Anything that burns always has its danger for children among others. These candles are NOT FOR LIGHTING! THESE CANDLES ARE SCENTED!
I am surprised!... that you have fingers left. But hey, thanks for the video!
There's nothing wrong with your fingers. I know how to use the machines, been doing it for over 10 years. Thank you for worrying about me!
Beautiful
Thanks 🙏
sure wish i had all of the tools to work with i could stay busy maken something .
You know, it's all in your hands. If you want to, you can do anything. And by the way, all my machines are Chinese, and they all cost at most 1,500 bucks.
You could get started with a $30 handsaw (if you buy new, $5 at a garage sale) and some sand paper.
It’s not for me.)
@@diy_wood I was pointing out a means for the flying saucer fellow to get started if he should choose to look at another way to get going as oppose to seeing a mountain before him. Not everyone has the iron kicking around after thirty plus years in an industry like I do. Nor do they need what I have, or many others, in order to get started.
About $400 - 500 worth of used equipment and another couple hundred worth of wax along with a contact with an urban tree removal company would get that product going.
@@noneofyourbusiness3553 I use to make all sorts of hickory handles for tools with my grandpa when i was a little girl . I love to watch woodwork being done .My Grandpa and I shared lots of good memories maken wooden handels together and worken usen the tools also ..woodwork fasinates me 🙏
I had a candle with coffee beans it went crazy
What do you mean? Explain it to me.
@@diy_wood the beans were settled at bottom. In a 4in glass with wax (doesn't matter which) as soon as the coffee beans got lit they went psycho. I'm in a triplex almost burnt down room being normal!
These are wonderfull sellers at craft shows...5 bucks apiece! Wood is in the nearby woods. Old dry wood the best.
That's what I'm doing!) I find dead wood from oak trees or other species that have already dried up and sell it for 25 bucks on marketplaces on the Internet).
Amazing work, brother! May The Force be with you!
May the force be with you brother jidai!
Reminds me of a Talking Heads song "Burning Down The House"
You're wrong, read what liquid sodium glass is.
Not too many have got all those tools in the shed
Well, that's their problem, not mine.
@diy_wood do you make liquid glass or can one buy it already made? I love your ideas here, kinda brilliant really!
I buy a ready-made solution. it's very cheap. For example www.amazon.com/Sodium-Silicate-Liquid-8-OZ/dp/B073S44BPH/ref=mp_s_a_1_6?crid=1KWNZHA2FB5M1&dib=eyJ2IjoiMSJ9.Y6QqCaVTAg4sqWEyR39FuzSx_9OatMJ8Vexv2hG7ZwGkiMvykPa3rZ0vC1e4-zeEo8YtDnkS7Dk0OMvvtWHpA7w7r26-kr8ZsZxv76lkbyQ.5Ni_5q1F33-YvMikalGh-Z0Xpy869HGFz3GVw7b1hX4&dib_tag=se&keywords=sodium+silicate+powder&qid=1714235975&sprefix=sodium+silicate%2Caps%2C201&sr=8-6
It's available both ways. Rutland Water Glass is a liquid. I don't know the concentration. You can experiment to see how many coats will work. Sodium silicate is available at pottery supply stores. You can mix your own.
Bark gonna fall off unless coated with epoxy.
The bark is coated with liquid glass, and it soaks into the bark perfectly. So it won't fall off anywhere
I suppose if you make a million of those you can make a million
No. 100,000 is enough.
I would like to know exactly what you used for the retardant and I would like to know what kind of wax you used etc. etc. everything looks really cool and I would like to try doing it for some of my local friends but how exactly do I know what to buy?
And used liquid sodium glass for safety and fire protection of the wooden mold. You can look for this in building supply stores, it's an excellent fire retardant. Next, I bought natural soy wax. It is very pleasant to work with. It has a low melting point. Nothing dangerous.
Next, I used specialized scented fragrances for candles or soaps. You can query amazon and find similar ones. And there will also be instructions on how to mix it with the wax. I add the fragrance to the hot wax about 3% of the wax volume. I already do this automatically, it came with experience. You can also use a scale for this.
You can also order wooden wicks on amazon. They are just cherry veneer. It needs to be soaked in a little olive oil. So it's easy to light. Also for these wicks they sell special stands where you insert this strip of veneer. I use two strips! So the flame will be more stable!
In general, I have told you everything I know.
Translated with DeepL.com (free version)
Rutland Water Glass is one such product available in my area. There are others. Pottery supply stores also have sodium silicate.
Do you use sodium silicate and sodium lactate both to make these wood candles? I want to make a safe one ? Thank you again!
Yes I use sodium silicate to treat the inside and sometimes the outside of wooden candle holders. I have done a test after the sodium silicate has dried completely, the wood cannot be set on fire even with a gas torch.
@@diy_wood thank you for the info!!
@diy_wood can the outside of the wood including bark, be applied with a wood sealer? I think water based sealers like spar urethane are non flammable.
You can certainly use a water-based varnish. But, for example, there are slight problems with oak. Sodium silicate stains oak very strongly. Perhaps it reacts with tannins and tannin. And if you coat the inside of the candle and the edges with sodium silicate and the rest with water-based varnish, you will have a different shade of wood. So I try to use one or the other. But I haven't noticed this problem with other woods. But there is another limitation of sodium silicate. It loses its properties very quickly in the sun. If you put a candle in the sun, the sodium silicate will start to peel off like flakes from the wood in just a couple of weeks. But the varnish is still dangerous. For it will not withstand overheating and just bloat, and then the wax will be absorbed into the wood and then the wood will catch fire.
Think you need to rethink this before you hurt someone that
you're talking nonsense
What is the best type of wood to use?
I use what I find already dead in the woods since I'm legally allowed to take it.
Mostly oak. For the video, I made an example in a willow tree that I cut on my property.
🔥
No
yeah millions, just make 2 million of them
Why not?)
@@diy_wood How many can you make in 1 hour, day, week, month, year? Sure, make them if that's enjoyable for you but 1 million will take 1 person more than a lifetime...and that's the point.
@@steveshooter9010 He said millions to be made. He didn't say he was making millions. If 10,000 folk are making them then millions can be made
Lite one.
What
@@diy_wood the wax filled items the clip is concerned with.
Maybe is they were filled with TNT.
it's just soy wax and a wooden wick.
If you make 250 units per week and net $15.00 each you can net $1,000,000.oo in about 6 years
......
What if you hire helpers and do 5k units a week? Do the math.
I have no idea what you did. Is it a candle or fire starter? maybe say something during the video?
I don't speak good English. But yes, it's a scented candle.
No way I would burn that candle inside even if shellacked with fire retardant coating. Crazy
This is liquid sodium glass. excellent fire resistant coating
We had a cat almost caught fire stepping over a candle !!
Very cool
❤️🙏👏Thanks a lot. I appreciate your comment
If you value your time it is likely costing you more than 10 dollars per unit to make.
The cost of manufacturing one costs 1 dollar. this comes with work and all the effort. with electricity bills. and we sell them for 25 bucks. read it here)
Are you nuts this is how you make a Firestarter. The idea is great but you need something to protect the wood from burning. This will start a house fire.
I showed in the video that I covered the candlestick with liquid glass. This is an excellent fire-resistant coating. You won’t even be able to light wood that has been treated with it with a torch.
Sorry guess I missed that part I do like your work and idea
@@diy_wood What in the world is “liquid glass”? I see the Russian words there but I still have no idea what that product is.
I am sorry. maybe I didn't explain it well. Here is a clipping from Wikipedia. Liquid sodium glass is an aqueous solution of sodium silicate, an air binder, made by firing a mixture consisting of quartz sand and soda.
The resulting glass, after crushing, is dissolved in water.
Sodium glass is a thick liquid of yellow or gray color without mechanical impurities and inclusions visible to the naked eye. It is a good fire-resistant material.
Thank you very much for explaining. This is very helpful.
You need a G Clamp for your G Clamp lol
But, it’s not g clamp)
What are they? Candles? Don't get it
Yeah, they're scented candles in wood. Beautiful candle holder made of natural material
0:30 : I hope you have some spare fingers somewhere.
I’m ok
Thanks
Fire hazard !!
Watch the video with your eyes and try googling what liquid sodium glass is, it's what I coat wood with to prevent fire.
I hope you do make millions. You will need it to cover all the lawsuits from burning down people's homes.
If you weren't so stupid you'd realize that wood is treated with liquid sodium glass. It's a fireproof material. Nothing will catch fire! And secondly, when we send these candles to customers, we include instructions for use and a disclaimer! Because if you're an idiot, you can burn your house down with an ordinary candle or match!
@@diy_woodamazing response it kinda makes me want to buy your candles love it
)
I'm too distracted thinking you are going to lose a finger the way you teach in like that.
No, it's under control. Don't worry about me
Making millions 50¢ at a time. No thanks
We sell each item from 25 bucks minimum.
@@diy_wood Thats impressive that there are buyers who will pay that.
Blade guard is too high as creates a reach over danger.
You're certainly right. But I'm as careful as possible with the saw, because I've been injured before and now I know how painful it is.
That bit is shot
What?
OSHA does not approve this message 😂. Bro, you only live once, but you only get ten fingers, don't you want to keep them?
What exactly did you see as the problem?
Good way to set your house on fire. Cool art though. Be careful
No wood is coated with fire retardant material. Liquid sodium glass. Google it.
Why waste our time showing us cutting all those bits of log up?
One piece is quite sufficient for us to get the message.
Oh, just one more thing.
In the interests of H&S, get your hands out of the way of the blade while it's running.
I winced every time you put your hand by the blade, expecting to see 2 fingers join the sections of log. 😢
You either think you have poor perspective or have never worked on a machine tool. If you are afraid of the machine, you will get hurt faster. I know how to handle it. Thank you for worrying about me, it's my pleasure.
There are millions to be Made by people who rebuild homes after they burned down by one of these candles 😂😂
no one is going to get burned by this candle, watch the video carefully. And see what liquid glass is, I used it to treat the d
What the hell are they 🤔
well, someone has to do the work
What ia ir?
Everything is fine)
Is this a comedy channel?
just a little bit
😅😅😅😅😅😅😅😅😅😅😅😅😅
🎈❤️
Wera gloves and a mask. That fungus will grow on you and in you!
Where did you see the fungus? If what you see on the bark is just lichen. Go look it up. Also, after liquid glass, it's unlikely that anything can live there.
😬
)
Crazy idea too many dangers for stupid people to kill themselves and sue the hell out of you.
Well, if you watched the video not with your eyes but with your ass, then yes, it’s dangerous for you. and if you looked with your eyes, you could see that I treated the wood with a completely fire-resistant coating!
😂
Was waiting for drill to bite into log and swing the clamp .
..that would've been entertaining
nothing would happen, since to the left of the drilling machine the tail of the clamp rests against the cabinet. therefore it is rested and in fact fixed
😨
Millions of what?
$$$$
This is a joke right? Candle holders made of wood?😅
YES, they are beautiful and unusual. And they are also coated with a fireproof coating. After it, the wood does not burn even under a gas burner
Millions to be made! I tells ya! MILLIONS!
Yah bro!
Try sharpening your tools.
thank you
That’s a lot if work very nice! How much?
25 bucks apiece.
There are millions to be made off this....millions of what ? Dollars or pennies ?
Bucks, of course.
millions of what
$$$$
Fuel and Flame in a combustible container. What could go wrong?
When you get new brains post here.
Google liquid sodium glass.
Uh,NO
Why not?
I reckon a fair amount of that million will be spend on lawyers defending you in fire hazard cases my friend 😂🤣
And that is what is wrong with the world. I literally lit something on fire, it burned and I put it next to something I didn't want burned ...not my fault someone must owe me money.
you're wrong.
At a minimum, we sign a disclaimer when selling this product. You can burn your house down with a cigarette or a match. And this candle is coated with flame retardant impregnation. It can't even be lit with a gas burner.
It's a fire hazard. Gilligan
You're stupid. Watch the video again
I will never take advice from someone who reaches around a moving band saw blade
and I never comment on other people's videos.
Putting your arm across a running cutter !!!!.
No!!!!
If you make a million in this business you will spend it all on liability insurance. You hand that to someone and they take it home and burn their house down guess who they are going to come looking for. Over the years I have seen quite a few really good ideas like this one that can no long be sold because of the liability issues.
There is such a thing in business, especially in commodities and with goods that have an immediate danger as a “disclaimer”. Google it
When a person buys this product, he reads the instructions, and if something happens to him, he is an idiot.
Because you can burn down your house with a match.
And by the way, these candlesticks don't burn! Because they're coated with a fireproof coating.
You can't see half of what his doing
Yeah 😀
I doubt it. It does not look like your business is worth millions so it is doubtful that when you get sued that anyone will make millions off the lawsuit. Making a candle container with material that is flammable is probably not the smartest move.
It is wise to watch the video with your eyes and notice that I am treating the wood with liquid glass. It's the best fire retardant coating. You will not be able to set fire to this wood even with a gas burner. So before you make any stupid conclusions, study the topic.
@@diy_wood Thanks for the reply couldn't read the bottle.
Methuselah made these and retired a rich man at age 865
I'm selling them for 25 bucks. Do the math.
@diy_wood In order to do the math I will need to know how long it takes to make one and what your expenses are.
the smell and toxins of burning acrylic . re-title this video "how to be sued into poverty with stupid crafts".
don't be an idiot. This is not varnish, but liquid glass, which is actually a fireproof material. don't be an idiot and embarrass yourself
@@diy_wood Ok bozo, make yourself rich by selling wooden butttt-plugs with a candle in it.
Do your same process, but use cheap tea candles. You’d only have to drill a half inch deep and the fire/candle is contained within a metal cup.
It would eliminate 80% of the time per candle and 100% of the negative comments.
You could vary the heights of the candle “holders” this way as well.
I don't care about the negative comments. Why would I use bad candles? Do you know the composition of tea candles? It's disgusting paraffin wax. My candles are organic soy wax. Good premium fragrance oils.
This is not a cheap product. It's all about the good stuff. Not cheap crap like tealight candles.
Millions you say . Yeah! If enough people buy them and burn their homes down, you're going to owe them Millions after the judge gets through with you. 😅
How stupid are you, go google what liquid sodium glass is and how it protects wood from fire. That's what I used on the wood
Bullshit
you just don't understand anything about it
That's what you have to say???
You will not survive your first legal battle
From who? From being a stupid idiot who doesn't know how to use a candle? Or from you who doesn't understand what a flame retardant coating is?
8.31 mins of wasted time from mr Bumblefoot. The safety board should have a word to him about safe working conditions.
no one forced you to watch, they invented rewind video for people like you....
Making millions off this idea is delusional at best, pull your head out of your butt and grasp the logic, and your idea is also dangerous, what the hell were you thinking
Well maybe if you don't know anything but talk in the comments then yes, you'll have a hard time making money at it. But I have working hands and a smart head and I've been selling these candles long enough to understand the demand and not just for them.
So get your head out of someone else's ass)
I've been woodworking for about 40 years now and I'm retired and making a hell of lot more money doing my projects and getting them done faster and safer than anything I saw you do in your video, looks like you burned holes into your wood with that nasty looking an quite possibly dangerous forstner bit, then actually making shavings like it's supposed work, you obviously don't take care of your tools so I can imagine that your shop is in shambles as well, I can run circles around your ability and have proved that to other so called wood Butchers, I even have family members that are Butchers as well, my customers know quality and it's the reason they come back
Wow, you'd make a great teacher! NOT!!!
Well, at least you can brag about your progress here. You clearly have self-esteem issues trying to prove something to some guy on the internet. I don't care what you're doing with your pension. In general, in a normal state of mind, you should have the same attitude towards me. But I don't! You're very hurt and offended that someone said something to you that you didn't mean.
funny. hahaha
My farts smell like roses 🌹
Well, smell your own fart
Millions? If you expect to sell a million dollar idea you may or even SHOULD have much better equipment.
What makes you think that? What did you sell or make?
@@diy_wood your equipment is not that of a million dollar product.
I used to build custom cabinetry. And I had top of the line equipment.