Savage Axis II Pro Trigger Kit Install for 12oz Trigger Pull
Vložit
- čas přidán 17. 08. 2022
- In this video, we install the M-Carbo Savage Axis Pro Trigger Kit on a Savage Axis II Precision .308. With an already impressive 2.5 trigger weight, this kit brings the average to 12 ounces and for only $20!
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including CZcams) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above. - Jak na to + styl
Just finished installing this on my 223 precision. Absolutely unreal how light the trigger is now! Pressing the accutrigger safety blade is the hardest part of the trigger pull 😂 Thank you so much for the videos! This is such a fun gun to shoot ❤
Another good video can you guys make a video how to swap the ruger american barrel and witch one do you reconend ?
Just did the install. Folks, he is not kidding. 10/10 You need to stop what you're doing right now and order. Im sure mine is less than 11 oz. Its almost too light. WOW
you aint kidding. I got mine took it out. breathed on the damn thing and it went off. Talk about like light lol. i love it.
Well that was downright informative as all get out I super appreciate you taking the time to make videos just like this to help us out
🤨 I have the same kit in my axis. 223 and my model 11 .308. Both pulled 2.5lbs dead on. How'd you get 12 oz pull from a 2.5lb spring?
Hi there I’m from Italy, do you mind to share a website where I can buy the lift kit, bold handle and the pro trigger kit? Here in Italy there is no way to get it.
I find your videos really helpful Thank you
What scope do you have on that rifle?
What muzzle brake did you add
Hope you found that washer at 4:55 and 5:07 it was on the outside of the trigger housing and not on the inside as you mentioned.
Different piece
Have you had any issues with this kit having the accutrigger on your rifle.? When I go to order the kit it says it won't work with accutrigger Models. Any experience with it on your gun I'd appreciate your feedback
Which one makes for a heavier/lighter felt trigger pull from the 2.5 and 3.5 trigger return springs in the Mcarbo kit?
kit comes with both springs.
Been wanting to buy this for my Axis II precision, but M Carbo states that this will not work for models with the accu-trigger which the Axis II Precision has. Have you had any issues with your trigger?
No none whatsoever.
I installed one, and one in a while the trigger locks up. This is just on dry fires, have not real fixed yet. I have mine with a bolt lift kit as well. I am using the 2lb spring in the kit. It is almost tooooo light of a trigger. I might swap with the 3 lb. I have the 3 lb in my Axis II 308 hunting rifle, same trigger no issues.
Nail polish or silicone does the EXACT same thing as lock tight, but MUCH easier to remove later
I’m wondering what the trigger pull would be with the 3.5 spring?
Ooooooh let’s see her in Action
Good question Billy. We'll see what we can do going forward. Thanks for watching!
I installed the kit with the 2.5 lb spring and ever time i close the bolt it locks up. So i installed the 3.5 lb spring and it also does it if you close the bolt to fast or hard. With the 3.5 lb spring my pull weight is around 3/4 lb. Is there any way to resolve this issue without installing the factor spring bact?
contact mcarbo they will help you. are you positive you did it all correctly? did you watch their video? you got it better now?
Hey boss question for you, when I get online and I order the M carbo Savage Axis Pro trigger kit is there a specific one that I have to look up for my Savage Axis to precision rifle 308