How to make cell phone signal amplifier From USB at home || Antenna booster
Vložit
- čas přidán 12. 02. 2023
- Hello , I hope you will support us . In this video, we teach you how to make a antenna booster with the highest efficiency. This antenna is made by an amplifier. You can use this amplifier to strengthen your mobile antenna Follow us on Innovation plus one channel
________________________________________
Please subscribe us : czcams.com/users/InnovationP...
________________________________________
Required electronic components:
Old led bulb
IC LM741
Capacitor 2200uF
Capacitor 1000uF
Capacitor 10uF
Resistor 4.7K
Diy cell phone signal amplifier
mobile signal booster homemade
How to make 4G Speed Booster Antenna
How to make 5G Speed Booster Antenna
Mobile antenna amplifier
Cell phone signal booster
Mobile antenna booster
Antenna TV booster
How to make Antenna TV booster
#Antenna #booster #mobile
Amazing,i've been looking for a signalbooster for long
Thank you for watching the video and comment my friend🙏❤
@@acousticsound7vc v
Idiot
Hi friend thank you for sharing great vidio good luck friend
Thank you, welcome to Innovation plus one channel my friend
Amazing
Thank you! Cheers!
Excelente proyecto, muchas gracias.
muchas gracias querido amigo❤🙏
You have very interesting ideas👏
Thank you! 😊
and so fake
@@ylajodiste1 My friend, instead of judging quickly, make this antenna first, you will definitely like this idea
Good morning,
Thank you for the effort you put into the video. Its clear and consise. And thats where my problem is i build the absolute replica of it including the brown sheath on the cable (thats a bit confusing actually) i've tried both YAGI and ground plane as an input and output aerial but to no avail. Literally zero. I am in the UK . Should i use different transistor(amplifier)? I think our range is both 800 and 2600mhz
Glad it helped, I will definitely design a new circuit for this frequency, my friend
Raange Is Mhz And Ghz For You? You Meant bandwith? Eather Way You Are Talking Just Trash.
Jesus, These Commenters Who Have NOT A SINGLE CLUE WHATTHEY ARE TALKINGA BOUT!
Kya baat hai bhai
I have good news, very interesting ideas❤🙏
Thank ye, I live in an area with poor cell reception. Ironically that's despite of being surrounded by 4 transciever stations all within half mile to a mile of my location. Unfortunately they all are blocked from direct LOS (Line Of Sight) view of my home by the topography of the valley walls and surrounding series of mid-valley ridges. My cell carrier wanted me to buy an expensive cell booster on a subscription basis.
After seeing this video, F that!
One final question, am I correct in ASSuming that this will work not only with 3/4G LTE but also 5G too?
EDIT: OK, I just read the description, it APPEARS that this booster will work with 5G. …I think.
My friend, this amplifier is only used when necessary, just to make a voice call, if you want to have 5G, you must use strong and shared amplifiers.
Nice
Thanks
First of all, thank you for your efforts. I think this system you are using is for terrestrial broadcasts. Do you have any work compatible with satellite devices?
Thanks my friend for watching this video, I will upload a new video on this topic soon❤
Hey man, nice video! I just wanted to ask if you did research about this which I'm sure you did. Can you provide the link to the sites you used. I'm just asking casually
Thank you my friend for watching the video. Yes, I will write all the information in the description
❤🙏
This device can't work properly cose OA LM741 has max bandwidth 1,5Mhz, but supposed work frequency is 900Mhz.))) It's a bullshit like all other stuff of this moron.
will this signal amplifier work with GPS tracker ? which will have IoT/M2M SIM card ?
Thank you my friend for watching the video❤
No, GSM
Wow.. interesting antenna
It sure is
Sir I make this it worked
Thank you for watching the video❤
will this kill me? Great editing btw👍
Did you like this antenna?
Hello can i ask if is it okay to use 3 10uf capacitor if it is powered by phone? haha i dont know this kind of stuff hihi
Hello. no my friend🙏❤
❤
🙏🙏
Sir can you help me ...
I need little stronger booster then that ....any link etc plz plz
Hello my friend. You may run into trouble with your country's telecommunication laws to build a stronger amplifier
@@InnovationPlusOne
Thank you so much for your response..
In my country that won't be a problem...even companies mad boosters are available but they r very expensive..and I m not that rich ....so if you could help me ..I would be thankful beyond words ...stay blessed sir❤
@@AsadKhan-fn9tp Please my friend,Yes Sure
It's great, who should I do all this? Will the phone technician do it? thanks
You must watch this video carefully to build this amplifier
@@InnovationPlusOne You look carefully, but I personally couldn't do it, a phone technician will probably do it, I don't know.
@@beche1838 I'm sorry I couldn't help you my friend
@@InnovationPlusOne It is clear, I will show it to the craftsman, if he does it, thank you
Is this work for internet speed
Can be use for boosting the data dawnload or data upload speed...
Actually when I am in indore at my home than internet network is very slow so can you please tell me what should I do
My friend, this amplifier can only work for voice calls when necessary and will not have the power to amplify 5G
Greetings. This works with 4G band 4 , frecuency (1700/2100) mhz ?
My friend, this amplifier includes a lower frequency and can only be effective for voice calls
👍👍
🙏🙏
Resistor 4.7 v?
Can you provide electronic components links please
Ok my friend💚
The LM741 integrated circuit (IC) is not suitable for amplifying high-frequency signals like 2500 MHz. The LM741 is a general-purpose operational amplifier that is typically used for audio-frequency applications. For amplifying signals in the MHz range, you would typically need a specialized high-frequency amplifier designed for those frequencies. Amplifiers suitable for RF or microwave frequencies like 2500 MHz are specifically designed for high-frequency applications to ensure accurate signal amplification without distortion or loss of signal quality.
Thank you for your information
What could be the best replacement?
i will try to make one of these here in Philippines.
@@joebertevangelista1933 Sure my friend
I don’t know if it works I presume it does because you made this video but I just wanted to say really cool job on the video. I love the way you animated and everything. Oh what editing program did you do that with that photo shop and Adobe tools or the one from Apple I can’t remember the name of it right now lol
Thank you my friend for watching the video and supporting me❤
@@InnovationPlusOne that's real? Or fake?
fake
It's real cuz metals such as aluminium and copper reflect wifi and cellphone signals, so everything you need to do is just position it correctly
Will it encourage the internet speed ? Replyy me sir
This mobile signal booster can only be effective for improving voice calls my friend
❤❤❤❤❤
Thanks❤❤❤
How can I use a smart phone with 100ft wired external GPS anttenna to use underwater. As side form the water prooffing which I have firgured out. I am looking to float a gps anttenna on the surface and use a chart plotter on a smart phone while scuba diving to locate wrecks and reefs off shore. As you know GPS sgnial does not travel underwater so need a wired surface antenna. What do you think?
Thank you my friend for watching the video❤
Because the risk of this work is high, it is better to buy from corporate GPS, but for more training, I will upload a new video for this idea.
Do you have a suggestion on where to buy such a GPS antenna?@@InnovationPlusOne
great video! Could you tell me how to test if it's working using an app?
Thank you for watching the video my friend❤
No need for an app
wooooooow
how do you can do it?
I need more guidance ...........
come on ...........
You can easily make it using the parts you need
Bro, what is the component - brown colour component which you used to connect near 1000 microfarad capacitor bro.
I don't understand, which piece do you mean?
Thank you for the amazing video.
My questions are;
What is antenna’s capacity in terms of range?
Also how many devices can it accommodate?
Thank you my friend for asking this question. This antenna can receive medium density signals easily and will support only one TV❤
Will this impact the signal for other people who are outside when we use this at home???
No, this amplifier has little power
is it work for full 4g internet network in any mobile operator network ? like bangladeshi mobile network
This mobile booster is for improving voice calls my friend
Can you tell me for very very low network signal in our Village so it will work or not
Its quality depends on the bandwidth of the telecommunication system in your area, my friend💚
Can it improve calling signals only or Internet speed also
Just call❤🙏
@@InnovationPlusOne If its just call onky is it possible you'll have still internet I mean dead spot having a signal will make you have signal boosted for a data sim?
Could it be used in a mountain area?
Of course, you must have a certain distance from the transmitters
Broo will it work for 5g and how shall i increase the distance of the antena.
Thanks for watching the video my friend❤
This idea will only be effective for making voice calls, soon I will make videos for 5G as well
👍👀
Thanks❤
Sir how it works
Can you please explain if you have no issues
Yes, I will definitely explain in a video
But sir I have made it but not working
How many miles is the nearest BTS to you?
Sir hmare home me inside 2 ya 3 network singnal aata hai, or jata hai
Fix nhi hai
Tower 🗼 distance aprx 1 km
@@citytravels5536 Is the GSM 2G network in your country on the 900 MHz or 450 MHz band?
bro will it help in strengthen 4g mobile data flow in 4g smart phone ?bcoz currently in my location though 40 GB data in 4G smart phone data is not picking up. will this circuit solve this issue ?
This amplifier can only be used for voice calls, my friend❤🙏
Bro please tell me voltage of capacitor
Thank you for watching the video my friend💚
2200uf 35v
1000uf 6.3v
10uf 25v
Hola amigo, el circuito funciona para 3g (900mHz) y para la señal 4g (b3_ 1800mHz) ???
Hello friend, the circuit works for the 3g signal (900mHz) and for the 4g signal (b3_ 1800mHz) ???
Thank you for watching the video my friend❤
3g
Where would you put the LED in the circuit? Would you put it in between pin two and and 4.7 K resistor on the LM741? Would you put it between pin three and the 4.7 K resistor? I’ll breadboard this and see how it operates. I’ll be curious to know if it works for me. If it does, I’ll post back with a link to my CZcams channel video on the circuit.
I will definitely write down all the explanations in the description
Did you tried?
It works?😊
@@AmitSingh-fb9ou It did not work. Supposedly LM741 shouldn't work for frequencies that high. Is their a new schematic up?
@@The_Ascension his video is fake probably, i checked out his other videos, most of them are crap
@@AmitSingh-fb9ou I replicated the circuit but no success. I never got a reply back on the questions I asked. I did find that the best way to go about this is to design your own antenna for the frequency needing amplifications. Their are may ways to go about this and it can be done, but the mosfet stated is out of spec from 800MHz to GHz levels. Also, The antenna has to be built either specifically for that signal or do a one size fits all. Yagi comes to mind.
I made it but when I switched on my ic is heating plz help me out of this problem...
use heatsink... online buy
Which IC did you use?
Lm386
is there any way to purchase one already built and ready to plug in?
My friend, there is no need at all, you can easily make this mobile antenna amplifier at the lowest cost by watching this video
@@InnovationPlusOne I understand but I don't have the tools or parts I'll tell u what send me a link I will buy it from u if u build it and I will pay shipping
Will it work on 5g signals???reply??
It can help you to some extent for voice data, but it cannot be very effective for the Internet
This is a great and simple Hack for the best antenna booster.
Thanks so much
Glad you like it!
Glad you like it!
Apakah berfungsi untuk menangkap sinyal wfi?
Thank you my friend for watching the video❤
No
Hey I can use this for 4G?
Hello my friend, this idea can only be used for voice calls when necessary❤🙏
Hi, I try this one, easy to find parts, Not much of signal change(like 1bar).Check every component before soled.Did i do some thing wrong..When i put modem close to this it net speed goes down. for 2g signal not that effect. Did any one else try this one.thank you buddy.
Thank you for watching the mobile signal booster, my friend, this idea can help improve the quality of voice calls❤🙏
Where can i buy it?
You can easily make this amplifier at home by watching this video and save money❤❤
Suport Wfi?
Thank you my friend for watching the video❤
No
What is the voltage of this all capasitor?
You can use capacitors with a voltage of 50 volts
What is the copper wire swg used?
Lacquered copper wires
What mm ??
Sar ye component kaha se milega
Thank you my friend for watching the video💚
You can find it from old devices or you can find it from electronic parts sales centers
Which terminal of the capacitors should be connected to which side?? Can you please tell for each capacitor?? 2:09
My friend, the polarity of the capacitors is clear in the video
whats it detailed principle?will you answer it plz
Thanks for watching my friend💚
It can collect weak suspended signals and rebroadcast them by amplifying them
Hello sit can it be used for 4G network speed increaser ?
This mobile booster is for improving voice calls my friend
What mm copper wire is used ?
Can it increases speed of internet
No, this amplifier can only improve voice calls🙏❤
really is working as a mobile network signal booster?
With this mobile booster antenna, you can only increase the GSM signals and be able to make calls to mobile phones in emergency situations.❤🙏
Is it really works?? Because I'm tired of this problem in my home so please genuine answer me.
My friend, this amplifier can only amplify voice calls and also GSM band
Can it amplify all kinds of network
This amplifier will only be useful for amplifying voice calls
tell me the Capacitor vot please,
10uf -v?
2200-v?
1000-v?
Thank you for watching the video my friend💚
2200uf 35v
1000uf 6.3v
10uf 25v
I have two questions: 1) Does it really work? (It doesn't matter which phone network Im user of, for example beeline/Cellfie right?). 2) Is it legal? (If I did something wrong, will they bother me because of unauthorized interference or fault in the telephone network?)
This amplifier is not very strong, so it does not cause interference in telecommunications
Bro, please make a booster video for 5G or 4G, we will benefit a lot, thank you
Thank you for your suggestion, I will definitely upload this video❤❤
I need the full name of this IC LM741 & I need Datasheet. Thanks you.
****
From Viet Nam ♥
Thank you my friend for watching the video❤❤❤
Op-amp IC LM741
Can u say the capacitor voltage values plz...
My friend, all information about this antenna booster is written in the description❤🙏
ya i saw but you have mentioned only uf values of capacitors..@@InnovationPlusOne
In my area the problem is network coverage for internet while no problem for calls. I receive 4g network data at speed of 200 kbps but in 5g sometimes internet disconnects and i have to toggle flight mode or wait for sometime to get back the internet. So i need the stable internet. What you suggest should i try this.
1. If yes this will stable internet connection.
2. There are any effect of this.?
3. Can i use ua741 instead of this ic.?
Here is my device network status
4g-- "-115 dbm 25asu"
5g-- "-106 dbm 36asu"
This mobile booster is for improving voice calls my friend
@@InnovationPlusOnethanks for the reply.
Do you have any suggestions to improve internet connectivity and i think the reason for the slow or lack of internet is because of poor signal strength, how can i boost it
underrated ideas
Thank you my friend for watching this video💚
Sir, will it works in Bangladesh?
I don't think it will work there my friend because it has different mobile frequencies
What Gauge wire is used for making this.
We can use lacquered wires
Hello, How many volts of capacitor should be used??
2200uF......?
1000uF......?
10uF......?
And have you used a Single wire or Different wires???
Bro, does this really work?
😏
3g/4g booster please
Thank you for watching the video and commenting my friend❤
More for 3G network and voice calls, it can be effective in 450 MHz band
how many power sources are you providing?
You can use a 5V charger to turn on this antenna amplifier
Capitors voltage not mentioned, kindly mention the required voltage of the 3 capacitors.
Voltages of 150 volts can be used
redy for seal u have .pl figdiagram and parts list for help me
Yes, of course, my friend🙏🙏
hello, in which ones can this booster (2G 3G 4G 4.5G 5G) be used?
What bandwidth should we live in?
Also, are you going to make a new video about it?
It will be very nice if you can make a combined version of this signal booster tool and WiFi booster tool as request.
Thank you for watching the video my friend❤
It can be useful mostly for voice calls and it is suitable for 450MHz bandwidth
I will definitely make more complete videos
Wifi signal boost hoga kya
@@Avtarzirader LM471 ist ein Op Amp Verstärker IC.
Had a good laugh. An LM741 amplifying a 900Mhz. signal. No way.
Thank you for watching the video and commenting my friend🙏❤
Can this work for 5G as well?
This booster is for improving voice calls my friend
thank you . what is the voltage of each capacitor ?
My friend, the voltages of the capacitors are in the description
@@InnovationPlusOne There is no measurement of capacitor voltages in description check please thank you
سلام ..
برای من که در ایران زندگی میکنم ..و آنتن ضعیفی داریم ..و در بیابان ها کار می کنم ..
آیا سیستم تقویتی برای دریافت شبکه های مخابراتی یا وای فای محلی .پیشنهاد دارید که بتوانم درست کنم ..ممنون میشم که پاسخ دهید دوست عزیز ..و ممنون از کلیپ های عالی شما 🎉
Soon I will make a strong amplifier for mobile antennas, my friend
My signal is good but data slowly connect indoor the booster work for data speed increase tell you bro please
Thank you for watching the video my friend💚
This circuit can only be effective for amplifying the signal to make a voice call
I will publish a video soon to strengthen the data
please fast uplode bro data speed booster 😢
Up for signal & data both
please mention the length of copper wires
Thank you my friend for watching the video❤
2 cm in diameter and 2 turns
@@InnovationPlusOne is itnpossible to use 1cm diameter?
Which wire is this where can i buy it ?
You can use lacquered wires or coaxial cable
Any alternative of 4.3k registor its difficult to get where im living 😢
🙏❤
how much is that price?
how to order unit tv antenna.
You can make this antenna at home with the lowest price, my friend❤🙏
@@InnovationPlusOne Not selling the unit, my problem is because I don't have the tools to use to assemble the unit my friend
India me kaam karega
This amplifier is useful for high frequencies of 2600 MHz
apakah di indonesia work
In most places, it depends on the frequency range of your neighborhood and can have different efficiency
What is the volt of all capacitor plz tell
The voltage of the capacitors is written in the description
Hello dear capacitor watt
1000 uf and watt..?
10uf and watt ..?
2200 uf and watt?
Thank you for watching the video my friend💚
2200uf 35v
1000uf 6.3v
10uf 25v
Thanks sir
Sir Pakistan in working this ?
does it work with 4g?
This mobile booster is for improving voice calls my friend
I m very lazy didn’t try. But have made any effort to build some thing to boost 5 g signal
You can easily learn how to make this mobile antenna amplifier by watching this video
Plz sell it
Hello friend, the circuit works for the 3g signal (900mHz) and for the 4g signal (b3_ 1800mHz) ???
Is it possible to access wifi too?
What battry type ?
6 to 9 volt batteries can be used
What is the volt of 10uf capacitor
The voltage of the capacitors is written in the description
i hate how everybody cuts the soldering aprta nd it looks like iots magic, NO, soldering is not something that you touch and it perfectly solders it to the metal without any problems especially with this nasty soldering iron tip.
you need to hold it there for a second so it can be secured by the solder itself and i would never solder copper to copper with solder and not knowing if the copper on copper contact exists, it 100% Needs To Ecist becauseif not, your sodler will act as a resistor wich will make antenna tranceivings wrong, it needs to be copper to copper and then you can introduce the solder itself, i useally smash the copper flat a lil bit so i know that tthe copper is superclose to the materiaal im soldering it. thisis a good tip for you all, le me tell you, i solder for 26 years now and i know what im talking about,.
Thank you for your explanation about soldering❤🙏
Is that circuit actually works?
In some areas, this amplifier can strengthen voice calls and GSM bands
Where can we get all the necessary material
from stores