Boeing 737-8 Max / Air Canada / Zvezda / 1:144 Scale / Assembly Process / Painting
Vložit
- čas přidán 21. 08. 2024
- In this channel you will continue to find many tutorials that can teach you and motivate you to make your own scale models, you will see that it is not as difficult as it seems and you will have fun doing it.
Here are some of my projects that you probably have in your stash and haven't build yet:
• Boeing 757-200 / Zvezd...
• Boeing 777-300 / Haseg...
• Revell 1:72 / DHC-6 Tw...
Feel free to Subscribe!!
Браво коллега!!
Thanks!! Glad you liked it!! 👍
You have built a lovely model but if you build another Zvezda Max you might want to note that the apu intake and the nose wheel leg are both wrong. Zvezda just copied these over from their 737-800. Instead of the V shaped intake behind the right rear door the Max has a flap which opens when the apu is running and closes when it isn't. The Max's nose wheel leg is 20cm longer to allow clearance for the larger engines which gives it a different sit from the -800. In 1/144 20cm translates to about 1.4mm.
DISCLAIMER: Do not try to peel off the tape with bare hands as it may lead to the model being _SCRATCHED_
Nice build as always!👍
Thanks!! Always appreciate it 🙏🙏👍
Great!!
Thank you!!🙏👍
Air Canada go around
Hi did you washed all parts with water for avoiding a press oil ?in the revell kit writes a wash all parts with water that s reason ı told this question to you
Thk a lot👏🏻
Best regards from turkey🇹🇷
Hi! Yes I always pre wash everything with a bit of soap before start assembling, this prevents bubbles or any debris that may appear on the final paint job! 🙂👍
@@theairplaneguy4250 ok thk a lot and finally
I will use tamiya mark s spray paint like a ts 26 code pure white (for fuselage)
Two diffrent colors mote ı will use for wings
Is Process describtion spray surfacer,paint,acrylic varnish right?
And can ı use tamiya x22 varnish ?
What type of putty are you using? You build great models. I really like your videos, thanks for sharing.
Thanks my friend I’m happy my videos are helpful! Sure look, I use three types Vallejo putty, Tamiya regular putty and Tamiya white putty 🙂👍
🎉🎉🎉🎉❤❤❤❤
Fantastic build! Do you have a paints used list?
Hi! Thanks a lot! Sure! Here is the list of the paints that I used for this:
Tamiya:
X-1
X-2
XF-16
XF-19
Vallejo 306 (dark rubber)
Primer ( Tamiya )
And that’s it! If you have any questions please reach out!👍
@@theairplaneguy4250 Thanks, my friend! I appreciate your craftsmanship. I am a beginners beginner. Starting my first kit this week. Do you have an email address to reach out to you?
Where do you buy the decals by the way?
Hi! Thanks for reaching out! Sure! There’s many ways to get one this in particular is from 8adecs they ship worldwide as well as drawdecals, and many others, take a bit but they are pretty great 👍
@@theairplaneguy4250а в России их можно купить?( очень красиво получилось )