Product Installation of GROHE Minta Touch

Modern and minimal, the sensual curves and arcs of GROHE’s Minta range will never go out of fashion and perfectly compliment any contemporary kitchen. Now you can add the ultimate in cleanliness and convenience with Minta Touch, the Minta line faucet featuring GROHE's EasyTouch technology. By allowing you to turn the water flow on and off with a touch of your arm, Minta Touch puts you in control.
To install your Minta Touch Faucet, follow these steps:
0:12 1. Fixing of the tap:
Guide the hoses and mixer through the tap-hole
Assemble the mixer under the sink with the sensor plate and fixing set
Secure the mixer from the top with the supplied tool
1:05 2. Installation of the pull-out spray:
Guide the hose through the spout
Fix the spout to the tap
Attach the pull-out spray head to the hose
1:51 3. Preparation of the water valves:
Install mixing valve to one of the t-connectors
Attach the t-connector with mixing valve to the warm water valve
Attach the other t-connector to the cold water valve
2:40 4. Connection of the tap with the water valves:
Connect the mixing valve with the t-connector on the cold water angle valve via the single flexible hose
Attach the flexible hoses of the tap to both t-connections
3:39 5. Prepare the controller box for installation:
Connect the t-piece to the outlet of the controller box
Attach the single flexible hose to the inlet of the controller box
4:29 6. Secure the controller box housing to the kitchen cabinet
4:47 7. Connection of the controller box to the water supply
Attach the connecting hose of the controller box to the outlet of the mixing valve
5:04 8. Connection between controller box and tap - Step 1
Attach the weight to the shower hose
Connect the GrohClick adapter to the shower hose and attach it to the bottom outlet of the t-piece on the controller box
5:48 9. Connection between controller box and tap - Step 2
Attach the flexible hose with no markings to the controller box
6:18 10. Grounding of the controller box
Attach the yellow balancing cable at the control box and fix it under the sink using the supplied tape
IMPORTANT: with a non-metallic sink, attach cable to nearest metallic surface
6:48 11. Connection of the Sensor
Attach the black sensor cable to the sensor plate below the mixer
7:00 12. Establish power and water supply
Insert the battery into the controller box
IMPORTANT: Do NOT touch the mixer for 1 minute after inserting the battery!
Turn on the angle valves
7:41 13. Commissioning
Adjust the water temperature for the TouchControl-function on the mixing valve
Test the Touch-function and adjust touch parameter if necessary
8:05 14. Handling of the Kitchen Tap
Usage of the normal lever for mixed water
Usage of the tap via the Touch-function. The spout can be swiveled at any time without turning the water on or off
8:41 15. Activation of the cleaning mode
Grab the spout for more than 5 seconds to activate the cleaning mode. The activation will be indicated by a single water jet
Afterwards the Touch-function is deactivated for 2 minutes and the tap can be cleaned
To learn more about the GROHE Minta Touch Kitchen Faucet, visit www.grohe.us/kitchen-collecti...

[@Noonan37]

My hose gets jammed in the elbow going back in, can't get it down, it looks so easy in this video.