Ceramic Coating Care Part 1 - First week after coating

Sdílet
Vložit
  • čas přidán 17. 04. 2018
  • www.visualprodetailing.com
    Are you looking to have a ceramic coating applied? We provide ceramic coatings to everyone from local clients to clients many states away. Please contact us through our website for more information.
  • Auta a dopravní prostředky

Komentáře • 84

  • @scribble1531
    @scribble1531 Před 2 lety +5

    4 years later, still great advice! Thank you!

  • @rickintexas1584
    @rickintexas1584 Před 5 lety +2

    Great advice. Thanks. I’m having my car coated next week in Houston. I was worried about rain and bird droppings.

  • @thatdudeCR
    @thatdudeCR Před 5 lety +1

    awesome advice thank you!

  • @brandonjulio4067
    @brandonjulio4067 Před 4 lety +8

    5:00 in is exactly what I’m seeing. I have a black 2020 Subaru Forester sport. Was ceramic coated, sat overnight and I picked up after 24hours. Literally while driving around for work immediately after it got poured on with rain. I rinsed it off when I got home and lightly dried it...I can see in probably about 4 different spots some blemishes. I hope they go away after a few days, already let my detailer know to check on if they do not go away but this gave me some peace of mind. Thanks 😇

  • @Somemjf
    @Somemjf Před 2 lety +1

    Question. I did the DIY Avalongking ceramic coating. Did all the prep and everything. In the garage left it for three days, took it out in the sun for the first time and everything looks great. When you get up close you can see what looks like water spots.. planning to was it Sunday as it will be 10 days after the coating. Curious if you know why I would have water spots? And how to remove them?

  • @alaskasoundguy2838
    @alaskasoundguy2838 Před 2 lety +1

    I have to drive three construction zones on the way home after getting it coated

  • @abhikhinda7705
    @abhikhinda7705 Před 2 lety

    I get the coating yesterday and its cold here in uk. So should i apply it?? In this weather when the cars are like iced in the morning..??

  • @Zip_Zero_ZILCH
    @Zip_Zero_ZILCH Před rokem +1

    I recently had a coating applied and the car set for 48 hours but then I had an unexpected road trip that I had to leave for today and ended up with bugs on the front end. Is this going to pose a bigger problem or do more harm if I just leave everything sit until the seventh day

  • @alaskasoundguy2838
    @alaskasoundguy2838 Před 2 lety

    What about if you have to drive on a dirt road I live in
    Alaska I’m getting mine coated them k have t
    Drive 165 miles miles back home the road will make it dirty and their will be bugs I will need to wash it a few days after to get all that dirt off what do I do them if your not suppose to in 2 weeks

  • @unnheann86
    @unnheann86 Před 4 lety

    my car got expost to rain drop after coating..and the coating use heat infrarate to cure when coated

  • @mikeybowden
    @mikeybowden Před 3 lety +1

    Finger print smudges? Should I remove them or leave them

  • @sambologna5443
    @sambologna5443 Před 4 lety +4

    So 3 days after i picked it up, it downpured over night. It was dry when i awoke, Then 2 days later, another 20 minute downpour! This time, i drove it a couple miles, and lightly dried with micro-fiber. I know you said in this video, it's protected by rain. Im talking BUCKETS of rain, twice. Just want to make sure its okay. Plus, Ceramic Pro Coating says 2-3 weeks for curing. Hope you read this. Thanks. Great videos

    • @joegophotos
      @joegophotos Před rokem +1

      So what happen with your coating ? I pick mine up tomorrow. It’s been on/off raining all week

  • @Doodledad_
    @Doodledad_ Před 10 měsíci

    My car got caught in the rain at the 7 day mark after ceramic coating , was it okay if I towel dried it with a microfiber drying towel? I didn’t wash it , just dried off the water with the towel .

  • @unnheann86
    @unnheann86 Před 4 lety

    so does it affect the coat?

  • @vinz8857
    @vinz8857 Před rokem

    Hey, so I got my car ceramic coated 5 days ago and it rains. And so much waterspots on it can i spray water on it and wipe it ?

  • @dennisthemenance5433
    @dennisthemenance5433 Před 5 lety

    HOW COME USING WHITE AND NOT DARK BLUE OR BLACK?

  • @MrMLNOP
    @MrMLNOP Před rokem

    After i get my car then rain pour but its not that strong. I think the ceramic just finish for about 3hrs then it get wet from the rain what will happen?

  • @andrewstarcher
    @andrewstarcher Před rokem

    hey i just got my car ceramic coated and it’s cured for 5 days and i went to look at it at the shop it got done at and there is little hazing spots, will them go away over time or should i bring it up ? LMN ASAP

  • @nicksdragon6929
    @nicksdragon6929 Před 3 lety +4

    How do they get rid of a high spot in 5 minutes after it has been on a car for a week? I would love to know that technique. Thank you. This is a great series.

  • @tiktokz-dx7he
    @tiktokz-dx7he Před 5 lety +3

    Does 7 days apply on ceramic pro also?

  • @Amayajuan97
    @Amayajuan97 Před 6 lety +5

    I payed a Carbon Flex coating for my 2015 BMW X1, by the moment I took it home after the 24 hours treatment it started raining and it got dirty on the sides. I didn’t wash it or anything similar but my concern is having water spots and it affecting the final result.
    What should I do?
    Pd: It’s been two days since I got my car coated.

    • @VisualProDetailing
      @VisualProDetailing  Před 6 lety

      Juan David Amaya Roman follow the coatings specific directions. Rain should not leave water spots. I'm not familiar with that product, but if in doubt contact the company and ask for a recommendation.

  • @ggqbc
    @ggqbc Před 4 lety

    What if salt hits it ?

  • @criscerv1598
    @criscerv1598 Před 8 měsíci

    Can i use wipers after ceramic

  • @weston407
    @weston407 Před 3 lety

    what happens if you live in Florida and it rains constantly during the summer?

  • @helloiiser
    @helloiiser Před 5 lety

    I applied Cquartz UK 2 months ago and followed it up by reload. Can I apply a second coat now. If yes what procedure should I follow.

    • @VisualProDetailing
      @VisualProDetailing  Před 5 lety +1

      That would be a no. You would have to chemically strip the reload which would be very hard to do without polishing. Reapply the reload regularly and you should be fine.

  • @mp2833
    @mp2833 Před 3 měsíci

    What if your windows are ceramic coated....don't clean the windows either?

  • @tarunbanga5890
    @tarunbanga5890 Před 3 lety +3

    Hi. I got my black colour car ceramic coated 3 days back but now its full of dust and have some bird poop ( I live in India). So should I clean it straightway or leave it in its present condition for 4-5 more days? Thanks

    • @VisualProDetailing
      @VisualProDetailing  Před 3 lety

      I would gently remove the bird poop with a damp microfiber towel but beyond that follow your detailers post coating instruction.

  • @badformtommy
    @badformtommy Před 2 lety

    Was it ok to apply C2v3 to a CSL coating two days after coating was installed and sitting in garage?

  • @hectorflores1544
    @hectorflores1544 Před 2 lety

    Hi I just got my truck ceramic coated this week. I understand to wipe bird poo. Off. Should I also wipe the bee poo(small yellow/orange spots) off during the curing process? Or just wait till the first wash.

  • @joliewu8625
    @joliewu8625 Před 3 lety +1

    I did a rinseless wash with Mckee 914 on the 8th day. I have Cquartz original, is that okay? Thanks!

    • @VisualProDetailing
      @VisualProDetailing  Před 3 lety +1

      Should be fine! Always follow your detailers(or if you applied yourself) coating manufacturers recommendation for that specific brand however.

    • @joliewu8625
      @joliewu8625 Před 3 lety

      @@VisualProDetailing it says full hardness cure 7 days, but my car has been garaged most of the 7 days, not sure if thats okay since it didn't get sun a lot

  • @jacktran4687
    @jacktran4687 Před 4 lety +1

    What if after applying the ceramic coating bird poops on the car. What can you do?

  • @naazimmaredia796
    @naazimmaredia796 Před 3 lety

    I got qtechniq ultra put on and it had two hot sunny days before it started to rain and the rain hasn’t stopped yet. The first rain storm was high wind and just pounded my car for over an hour as I was trying to quickly get home. Should I be worried about the coatings longevity now that this has happened within the first 4 days of it being applied?

  • @nickhines1131
    @nickhines1131 Před 3 lety

    Is this the same for turtle wax ceramic spray from AutoZone?

    • @VisualProDetailing
      @VisualProDetailing  Před 3 lety

      Highly doubt it, sprays are usually much less stringent about cure times and wash timing.

  • @jattlifestyle
    @jattlifestyle Před 4 lety +1

    if ur clear coat faded can u use few layers of ceramic coating work for while or not

  • @Outwest483
    @Outwest483 Před 4 lety

    Is there anyway to get a sticker to stick to a window?

    • @WORMGERM
      @WORMGERM Před 3 lety +3

      Yes, the adhesive on the back of the sticker

  • @robinheiz
    @robinheiz Před 2 lety +1

    Can I wash it (water only high pressure washer) on the 8th after application? I got two layers of Qjutsu Soft99 Ceramic (10H) on my car. The car has only some dust and some rain dirt on the lower part of the car.

    • @VisualProDetailing
      @VisualProDetailing  Před 2 lety +2

      Not familiar with that product, but in general it is best to use the pressure washer to pre rinse, then hand wash with microfiber mitt and car wash soap, rinse, then completely dry. Never let any car ceramic coated or not air dry.

  • @therealist218
    @therealist218 Před 2 lety

    What about winter weather states such as salt after getting cermic coating - do u not wash until after 7 days also will cure time still be effective in cold weather

    • @VisualProDetailing
      @VisualProDetailing  Před 2 lety

      Usually you will be fine as long as you are observing the initial 12-24 hour period. During bad weather months in our shop we like to apply a secondary sealant such as Gtechniq C2v3 or Gyeon Cure to freshly coated vehicles to help protect the coating during the initial 7 day cure period.

  • @susanmcgee3635
    @susanmcgee3635 Před 3 lety

    For a commercial truck , would you get logos applied before or after ceramic coating?

  • @boarhog1979
    @boarhog1979 Před rokem

    Is it normal to feel slightly greasy after the coating has been applied and dried for 12+ hrs? Thanks in advance

    • @VisualProDetailing
      @VisualProDetailing  Před rokem +1

      It really depends on the coating. Some are slick, some are smooth, some are tacky, especially the first few days.

  • @scorpioleo16
    @scorpioleo16 Před rokem

    My car was coated Wednesday. Yesterday a heavy rain filled my hood with giant water spots. It looks horrible… Are those water spots affecting the ceramic coating? It’s better to get the car to the detailer for washing or just sit patiently as the ceramic cures ?

    • @VisualProDetailing
      @VisualProDetailing  Před rokem +1

      Should be just fine. Rain water will often spot up because of dirt around it but does not leave water spots with due to hard minerals that etch like tap water does.

    • @scorpioleo16
      @scorpioleo16 Před rokem

      @@VisualProDetailing The spots are white, like they have calcium residues or other minerals. I guess it was rain water combined with dust and I don't know what molecules, because the end result is hard water spots, that look like limescale.

  • @Outwest483
    @Outwest483 Před 4 lety

    I just had a ceramic coating put on and now I can’t get any stickers to stick to my rear window... is this normal?

  • @arsalanazhar3340
    @arsalanazhar3340 Před rokem

    hey! awesome video as always. i have a question. i got my car ceramic coated and its first wash is due after 2 days. but unfortunately there was rain in my area and now my car has drops all over it and they also dried up on the car. i am worried whether this would damage the ceramic coating or leave water spots. should i really wait 2 more days for the first wash ?

    • @AlOL81
      @AlOL81 Před rokem

      The water spots are easily removed with specific products like Chemical guys Heavy Duty water spot remover. It won’t damage the ceramic coating. Hope it helps

    • @michaelbrown-ws1pc
      @michaelbrown-ws1pc Před 11 měsíci

      My coated car was rained on 4 days after process and I have no water spots, and they said you can wash it after 2 days. That's odd, most videos clearly state not to wash 7-14 days after coating. My detailer told me 2 weeks. What type of coating did you get?

  • @scotta5766
    @scotta5766 Před 6 měsíci

    Any recommended cleaners for coated wheels?

    • @VisualProDetailing
      @VisualProDetailing  Před 6 měsíci

      Any PH neutral car wash soap should work well. If they have a lot of brake dust buildup pre-rinsing them with a low PSI pressure washer then using an ferrous iron removing wheel cleaner should get them back in great shape, I use 3D BDX wheel cleaner in my shop as it works just as well if not better as the expensive ones at a fraction of the price.

  • @tiktokz-dx7he
    @tiktokz-dx7he Před 5 lety

    Is it possible to wipe the dust on my car or should I leave it like that (3days curing)?

  • @claytgibbons2089
    @claytgibbons2089 Před 3 lety

    What about rain water within 7 days

  • @marcelm4726
    @marcelm4726 Před 3 lety

    Can i put a cover on after ceramic? My garage has no shade at all.

    • @VisualProDetailing
      @VisualProDetailing  Před 3 lety

      No!! Covers can hold in moisture which can cause the ceramic to cure improperly. I have seen BAD things happen from people covering cars before the cure period is over.

    • @marcelm4726
      @marcelm4726 Před 3 lety

      @@VisualProDetailing should i leave without cover? What if it will rain? I dont have ang shade in my garage

  • @christopherjohanntan969

    Hi, May I ask if I can use a mothers clay bar on ceramic coated car?

  • @trento8397
    @trento8397 Před 2 lety +1

    If a professional applied the ceramic coating there should not be any high spots

    • @VisualProDetailing
      @VisualProDetailing  Před 2 lety

      Even professionals with years of experience can make mistakes, it is not unlike any other profession.