💈Thanks for this nice video💈, it is for the benefit of many people🎗🛠, have even bought a slim Line from eBay and the button on it does not work⚙️, the warranty on it does not work because one has bought it on eBay, has written to Andis company, and they will not help because I bought it on eBay. And your video here solves the problem👌⭐️
anybody know of a "swap kit" to put that small andis slimline pro blade on another, ie; more powerful, trimmer? ...or an aftermarket motor thats got more power? thank u
So I’m having a hard time sourcing them as well unfortunately but I will say they are game changing. Looking for an alternative way will update on the channel when I do !!
Buy a brass bristle brush and thoroughly brush both sides of the blade, going outwards towards the tips of the teeth. Make sure you use a real brass bristle brush and not a brass-colored steel bristle brush (use a magnet and verify it does not attract the bristles), or you will dull the blade. The brass bristles are strong enough to remove the tiny jagged burrs left on the teeth after sharpening, which cause the snagging and rough cutting, but are soft enough to not dull the cutting edges themselves. Make sure you clean, disinfect and oil the blades afterwards, as the brass can leave a coating of itself on the blade which could oxidise and turn dark, also some might be allergic to it.
💈Thanks for this nice video💈, it is for the benefit of many people🎗🛠, have even bought a slim Line from eBay and the button on it does not work⚙️, the warranty on it does not work because one has bought it on eBay, has written to Andis company, and they will not help because I bought it on eBay. And your video here solves the problem👌⭐️
How many sticky notes did you use for the adjustment
Usually I use 2 but I recently purchased the company’s pre adjustment metal pieces.
I want to get the battery
anybody know of a "swap kit" to put that small andis slimline pro blade on another, ie; more powerful, trimmer? ...or an aftermarket motor thats got more power? thank u
Nice video thanks ! Where I can buy a new battery for the andis slim ?
Unfortunately things have been out of stock from distributors not sure when they’ll be back
What if I didn’t all you said do and my blade doesn’t cut?
Then the blade it self would be the issue. I’d break the blade down soak in blade wash and then retest if still nothing blade is defective
@@dblessthebarber thx bro
Does the andis slimline gtx have a stronger motor than just the regular slimline pro li?
To be honest feels the same. I wouldn’t recommend it for going through bulk. Mostly for detailing and lining up they hit when adjusted right !
Do you know if i can put gtx clipper on the li ?
With modification yes. The slimline pro GTX is the bald you could use
Why my slimeline pro running slow... Do i have to change the motor?
Could be several things. Bad blade, weak motor. Or placement of the blade on the clipper
My Slimline keep jamming up I oil it blades are tight take it apart and back together good for 2-3 cuts then starts jamming again
did you try soaking in blade wash?
Link for the motor?
I have a distributor account through the business there’s no outside sales link I could give you to get it unfortunately :/
Where can I purchase the purple sharpening stick? I experience snagging after sharpening my blades, never knew why until now... thanks!!
So I’m having a hard time sourcing them as well unfortunately but I will say they are game changing. Looking for an alternative way will update on the channel when I do !!
Thanks for the comment !
Buy a brass bristle brush and thoroughly brush both sides of the blade, going outwards towards the tips of the teeth. Make sure you use a real brass bristle brush and not a brass-colored steel bristle brush (use a magnet and verify it does not attract the bristles), or you will dull the blade. The brass bristles are strong enough to remove the tiny jagged burrs left on the teeth after sharpening, which cause the snagging and rough cutting, but are soft enough to not dull the cutting edges themselves. Make sure you clean, disinfect and oil the blades afterwards, as the brass can leave a coating of itself on the blade which could oxidise and turn dark, also some might be allergic to it.