Video není dostupné.
Omlouváme se.
KNOCK knock…DENIED
Vložit
- čas přidán 4. 07. 2024
- #bandmsgarage #coxfamily #ben #denied #inspection #gmc #blowup #diy #betterlucknexttime
Ben and Murrie repurpose some tires for Naties car. The two find a delicious new hamburger joint. The inspector fails the final again. Bens beloved truck struggles. Thanks to the borescope which really helped Ben determine how broken his truck is.
DS630 Dual Lens Articulating Borescope: www.amazon.com...
5% Discount Code: 63MM97DL
Official website: depstech.com/
Grab some MERCH!
shopbmsgarage....
Rory , Robby, Paul, Matt, Merlin help Ben find a Motor for his truck...!
Crickets
It’s one of the most common engine platforms there is. I’m sure Ben can find one easily on his own
Ben,u need a bee keeper uniform to go w Great w the new construction tin bee hives
Would love to watch them build Ben a motor.robby could work some magic as well👍
Out of gas, it happens.. the real moral of the story is to have a dad that loves you and will always be there for you
@@bobmorris7770 for real!!! #dadsthatcare
Check with cousin Merlin, he always has a couple sitting around around. He gets them from his junk yard buddy.
16:24 The step sister comment cracked me up 😂
@@Zeus_a_Gentle_Staffie I am still laughing!!!🤣
I agree Robby ,Paul,Merlin and Rory need to help Ben out with a newly rebuilt moto
" If the glove don't fit, you must Acquit" LOL
LOL i was thinking he looked like O.J. trying on that glove. You know what they say about great minds?
Your house is looking good as each step gets finished.
Marie you are amazing you are not afraid to try anything the house looks great congratulations on it being done on the outside. The kids did a great job too they don't whine like kids today they just get it done . Oh ya Dad did ok too 😂 we love ya Ben 🇺🇲🇺🇲🙏🙏⚒️
Natty is hilarious the house looks awesome love the siding❤❤
Y'all have done an amazing job on y'all's house! Love watching the whole family pitch in and do the work! Alot of kids these days don't help their parents!
@@dannylenderman7294 we could not have done it without them. They are amazing! I love them all!!!
The G.M. AFM/DOD system shows up again.
If it's low on oil you have ticking lifters refil the oil and clean pcv system
What nice kids! Hard workers,prolly got it from mom and dad.house is so beautiful, concrete work looks great too.god bless kid's.love skinner family.
@24:30 change the oil? Or add if it's low,crankcase ventilation (pcv) mite be plugged that happened on my ma's car it was blowing oil into the carb real bad blow by, the whole inside of intake manifold was soaked with motor oil .Changed oil cleaned pcv system and it reduced oil consumption drastically.
Moving forward a little at a time is still moving forward.👍
@@robertr4193 so true.
Love this channel ❤️ The teamwork is awesome! I absolutely enjoy this family.
Thank you for sharing 👌 😊
It looks like you are making serious progress on the house. Hope you can move in soon.
I love the progress and I know a matter of time you guys will pass and all the hard work will be worth it
Good move on the tires, I put 265's on my 2003 Exploder, With a 3" lift, it made a big difference.
Doing a great job guys, keep up the great work!!!
Why blocking your sister shot was so funny? LOL. Hey let us see some of his games footage like Paul show of Jace.
That DPStech is a great piece of equipment. I have other of their tools and am impressed.
Good afternoon, from Nyköping Sweden!
Coming along great.
That borescope works real good and has awesome picture on it. Looks nice and clear I have to get one of those
Step sister! Almost fell out of my chair! 😂 Great video! Excellent people, excellent content and excellent editing!!
❤ Bummer about that inspection. 🦬
Don’t let the inspections get you down. The entire fam has accomplished so much on the house
Y’all have been very professional about the inspector. I would have already lost it on him!
Great job again.
It's looking great.
You need new cover gaskets too
Chimney sweep here. The shot on the stove pipe going into the wall. Couldn't tell if the mantle was wood or not. Couldn't tell if Connector pipe was single wall. If both of those exist you should have a heat shield between the pipe and the wood. Clearance to combustibles on single wall connector is 18 inches. Keep up the fun videos!
Awesome progress on the house. Sorry for your engine trouble on the Denali. What is that on Oaker's face? Is he trying to look like his dad?
@@ramjam720 summer fun facial hair challenge. Coach lets them have roughness in the summer.
amazing how anything will start and run when it has ...GAS..... what a good Dad Ben is coming to the rescue of a damsel in distress...!
Ben ; if the glove does not fit you must aquitt..
Glad to see more progress on the House !
Mari and Ben, your house looks amazingly beautiful. Congratulations! Job well done. Well deserved 👏 🙌 👌 👍. Thanks for the share. Your kids are great bunch 👏 👍. Keep up your great work and videos. From Orlando Florida.
Looks good nice job😊
Very nice your, wife can use a cut-off grinder. What a great family!
I love the siding and all you are doing to your home. Great job Cox family!
Good Morning from Western Upstate NY.
I've had to buy a lot of tires from FB I think it looks better
Sorry about your truck as you said always something. If I lived closer enough I would have you work on all my stuff. Great Dad and family. 🙏
Rebuild kit along with AFM delete kit Ben, machine heads. You'll have a new engine ben instead of a used one.
Your house is a labor of love. Something to be very proud of, and the kids too. You all have some nice things there. I'm third generation construction person and you all have taken on a big task and are killing it. Very nice job.
@@davidbreaux5989 thank you for the words of encouragement. Our heart is starting to wonder if we will ever pass the final. Your little burst of kindness was so needed! Thank you for watching!
I knew you guys would love Burly burger. I'm glad you stopped there while up north.
@@Rafiki5333 seriously soooo good!!!!
@@bandmsgarage I'll be watching to see when Ben does the Brigham challenge on a future video. Lucky for me both locations are near my house so I go often.
It ain't got no gas in it
I is so great to see a family work together so well! Enjoy it while the kids are still at home!!
Failed another inspection?..............I suspect your "Inspector Gadget" watches your channel. 😂
@@biggooddad maybe 🤔
Do you know what time it is when the inspector fails you for the third time ?
It's time to get a new inspector !!! 😜
Pretty soon you'll be relaxing in that new house. It will all come together.
fingers crossed for ur inspection 😊
@@fredgrow2608 thank you! We need all the help we can get.
GOOD JOB!
I sure enjoy your family!
Rusty's OffRoad 2.5 inch springs and shocks were great on my WJ.
@@wbball15 Bens looking. The hunt is on. Sometimes I think Ben enjoys the hunt for parts more than anything else.
You are a wonderful family doing amazing work. Incredible skill sets. May you always be blessed.
The siding looks great ! 👍
Def sounds like death rattle on engine, pos note exterior house lookin good !
great as always great content very entertaining
Driverside valve cover, oil pan deflecter both have factory service bulletins on them and need to be replaced. And plug in a Range Technology dongle to keep it in V8 mode all the time. DOD ruins engines and transmissions the plug in will save your truck. Change your oil regularly.
I love that outside light I never seen one like that before 😮
you could spritz your siding with muratic acid to accelerate the rust patina
Well Hello from Kiwi land
North or South Island?
I'm north island
@@Zeus_a_Gentle_Staffie I’m northland
Time for a 8.1 and Allison swap! Seems like I remember someone down there with a wrecked Suburban that has a good motor.
Awesome and outstanding as always
I don't have anything that new but I have two 400 small blocks
lifter noise you may need to do the AFM / DOD delete!
What I do when I'm welding is I use one hand to do the trigger and I use my writing hand closer to the tip to control what it is doing otherwise I do terrible welding
Man I know that sigh... but God provides.
I thought you were going with airstream look like the camper
@@OldChevy79 😂😂😂 more man cave ish.
It's the OJ glove. If it does not fit, you must acquit LOL!
I don't think the gloves were supposed to fit you Cinde-fella !
compression test the cylinders
Advanced Fuel Management and Cylinder Delete.Takes out lifters same cylinder or? ..And you see the damage it causes.
So did you and Paul have a falling out? I know you have your own youtube channel now but it seems he would be a great resource for a motor and possibly a place to change the motor. I just feel like there is something we don't know about the two of you. Your brothers as well as youtuber's. I just feel with the resources you both have and the knowledge you both have this truck could be up and running in no time flat. Also I think if you both did a video on teaming up it would be a boatload of views. Just my thoughts. Still like the content.
That is a good quality picture.
I think next time the inspector visits. Ben you're on the grill, girls. You're making dessert, boys, you're serving and making salads and drinks. That should get your occupation permit 😂😂. Sorry about your truck, Ben. And the house looks amazing 👏.
Hope this is the last list from the inspector. Things are really looking good so far. Help Ben needs an engine for his truck.
I've heard that a mechanics car doesn't run. While everyone else's in working.
Hi guys I reckon yous have done pretty good job well done keep up the good work not far to go
2007- on up to when GM attempted to fix it.I won't buy a 07 on up because of it.GM / CHEVY.!!!
you guys are an awesome team lol
Loving the look of the house👏. Fun video except the truck problems 😢
Happy 4th of July 🎉
as for your truck try valve seals first then see what happens I've got a chevy trail blazer 07 doing almost the same
hope it works for u
You got cyinder delete/ afm problems.lifters and a dead cylinder. GM famous.!!
Can you rebuild it ben at least you would know what you got
Inspectors suck. I know they have a job to do but some of them let it go to their heads. Good luck getting past next time and moved in soon you all have worked hard to get there.
Ya!! Someone come and help Ben get a new motor and put it in with him!!!
We still love you Ben (The Wicked Step Sister)...🤓
I go to our Dump and jump in the bin and dig threw th.for tires. I take them home and use them or sell them to people who need them. I don't charge them much 20 dollars most of the time. Crazy how good of tires people throw away. Like they say "Ones man's junk is another Mans Treasure"😂
The house is looking Beautiful wow you's did a good job. I wish more people would try and remodel there own houses or even Build. There isn't nothing to it. All's you need to know is how to measure even if you have to count the lines on the tape measure 😂 like me 😂
Ben talk to your cousin Merlin he's always willing to help
could the needle bearing rocker arms came apart and sent needle blearings thru your motor. Common for late model gm's
The WJ speedo will be off by enough to get a speeding ticket, at 55 on the speedo you will be going 63, ask me how I know.
How many last piece of siding does it have? Lolol
@@speedy5305 that is what I said
I’m confused on the siding, is it aluminum.?
@@gregholmes3661 nope raw steel so it will rust after a little while.
Mess like his butter pauil lol
Needs a tailgate too.
hey you found OJ's Glove
I feel bad about the inspection. Hopefully you all can get the list completed and pass the next one. Out of curiosity, is it the same issues that keeps popping back up on the list or is it a new set of things to fix?
The popular trend now is to build with old rustic metal and wood,I don't get it,maybe because I lived through that era, and it meant you were poor, I guess the next Trend might be living in caves????? I do like your videos, and your wife is a hard worker, I do miss you on Matt's though.
He wasn't on Matt's, he was on Fab Rats.
@leonardbakers sorry for my mistake, I watch both Fabrats and Matt's,along with many other build shows, and was Cornfused.