I Bought the NEW Bambu Lab A1 Combo - Vlog 5
Vložit
- čas přidán 9. 01. 2024
- Welcome back to another DAY IN THE LIFE video of my 3d print farm. In this video I'm cleaning and organizing my print shop after a VERY busy Christmas season. I'm also doing a full, follow along build of the new Bambu Lab A1 combo 3d printer, and building 2 more risers for my Bambu Lab AMS units.
Thank you guys so much for watching, we're on the road to 5000 subscribers so it would really mean a lot to me if you subscribed and joined me on my 3d printing journey.
My Etsy Shop - macymakes3d.etsy.com
Buy me a coffee - www.buymeacoffee.com/macymakes3d
Amazon UPS Battery - amzn.to/3O04B3Y
Double Sided Tape - amzn.to/3U0MIpP
AMS Riser - makerworld.com/en/models/1653...
Sunlu Mod - cults3d.com/en/3d-model/tool/...
For behind the scenes 3d print farm content:
Vlog 1: • Running a Small 3d Pri...
Vlog 2: • I Ordered 50 Rolls of ...
Vlog 3: • I Bought ANOTHER Bambu...
Vlog 4: • 3d Print Farm Day in t... - Věda a technologie
If you load two filament rolls with the same color you can set the AMS to continue with roll 2 when the first one is empty. A way to save a lot of waste.😄
I’ve tried that, and it’s definitely something I do if I’m just printing for myself, but it leaves a hard line in the print once it switches rolls and I can’t sell an item like that. I’ll try it and show it to you guys in a later video
I have not had that experience with my X1 Carbon. Maybe it's a p1p thing? I just got my A1 as well and I think it'll handle your 3/4 empty roles just fine.@@macymakes3d
@@macymakes3d You can make a simple Smartphone stand to give as free addon to order
@@macymakes3d I was going to suggest the same thing. I had so many nearly used spools and the AMS fineshed them all off!!! I just loaded the nearly dead ones into slot 1-3 and a full roll into slot 4. As long as I was using the same brand I didn't notice any line in the them at all, this was on a P1S so basically the same printer you have.
There can be slight variations in color between batches of filament - even of the same brand.
I could make most of the products I sell with those empty rolls there's tons of filament left
You can always use leftover filament for simple freebies like bookmarks or a small thank you print. Should only be 3-5 layers and a filament change line wouldn't be an issue.
True! I’ll try to come up with some cool freebies to send with my orders. Great idea!
Really love your enthousiasme and vlogging style. Keep it up!
Thank you :)
Keep making these vlogs, they are great!
Thank you 😊 and thank you so much for watching! Definitely more coming
Please consider storing all those leftovers in a dry place. You can donate them or recycle them into new filament spools like what CNCKitchen showed. Maybe an idea for another video 😉
Congratzz and happy newyear to you. Goodluck with your business.. 👍😀
Great video 🇦🇺👍 looking forward to more A1 content,
I love the A1. I think my wife would kill me if I buy any more printers though! Hah. With that leftover filament. There is another CZcamsr Morley Kert that about a year ago did a series where he'd take a portable 3d printer setup to a park or Cafe and people could bring their broken items in and he'd repair them for free using parts printed on his 3d printer. Might be able to reach out to him and see if he is still doing it or if he knows anyone else that is doing it and then donate all the left overs to them. Might be able to do a bit of partnering to drive some additional traffic to your CZcams channel if you're donating the stuff you're throwing out anyway and they'll do a shout out.
You could use the leftovers to print buisness cards or freebies to include with your orders.
Working on some freebies now :)
From Elegoo to Creality to "Bambu Bliss", I have have finally achieved 3D printing enlightenment.
Might sound weird, but I'd actually buy those waste rolls. My son's sovol sv07 runs fine until it runs out, and it would give him more filaments to play with.
This. Could just take the filament off the rolls to ship them all together
Litterally just got my A1 today although no AMS for me, I love it so far, had an OG Ender 3 that was heavily modified and I just want a printer that prints rather than one that I have to fix all the time. Starting to wish I had the AMS though xD
The printer is great! But the ams is great too if you ever decide to get one
Get the AMS lite, it's WELL worth it!
@@macymakes3d it is difficult for me to justify at this time as I tend to make practical prints that serve a function rather than artistic. It is making me want one anyway xD
Excellent
Happy new year.
I got my son an A1 for his birthday last weekend and he's loving it. It's an awesome little machine and it's nice to have it next to my P1S. Waiting on the hardware for the top mount kit.
That's awesome! Definitely a great printer for kids.
Quick tip if you glue a bit: buy a whambam mat, or anny other 100% silicone mat to lay under your models, then you won't need the paper😉
some one reloads their ammo 😍😍❤😁
You got a really great set up over there 😆
Was lookijng for a good AMS riser - sold me on that one.
I just got that printer last week too. I love it. I'm printing with it constantly. My biggest issue is having a brain block when i can't think of what to print next 😂
Nice work👍
Thank you :)
One minor tip, with those overture rolls when they get lighter they seem to have problems spinning in the ams as they get too light. I found sticking something in the middle to weigh them down a bit lets you use the last bit of filament, and eliminates the line you sometimes get (which happens when the ams takes longer to load the spool due to it not spinning correctly). It's not foolproof but helps a bit. I tend to use the ones with very little on them for any small items that only have a color change right on the last couple of layers.
Yes! I've actually printed a part to do this, I just haven't gotten any weights or anything to put in them yet. Definitely on the list of things I need to do though.
I just made it to the end of the video and seen how you routed the ptfe on you p1p, I’d suggest you find the cable chain set on printables and print the ptfe tubing guide and also print a long 90 degree ptfe tube guide. I had an issue with both the tubing rubbing on the metal frame and the tube sagging and rubbing on the carbon rods doing it that way. As you run your printers a lot like I do it seems like an easy upgrade to prevent misery down the road.
Thanks! I'll look into these upgrades :)
awsome video. just getting into this community. plan to get a bambu lab printer eventually but starting with a creality.
1:18 get yourself a mosaic pallet (doesn’t the bambu ams do end of roll use) or something to join roll ends to make multicolor parts for raw display or spray painting. Sell as a product or something. Roll end figurine or name signs (surely there will be a teacher out there that would like a sign made from “waste”… ) price it a little higher to counter the time spent dealing with each roll end.
Aside from wasting good filament and the enviro considerations. It’s wasted material you’ve paid for and you may as well use it up - but perhaps the time to deal with roll end vs what you recover is not worth it.
As you have Bambu’s with all their waste perhaps you could get a filament extruder (cnc kitchen had a good one albeit another pricey) and recover full rolls..
Alternative to landfill - donate to a local school or maker space.
I really like the waste end of roll nameplate idea! I’m definitely doing that. Not something I had thought of but I think it’ll be really cool actually. Thank you! 😊
Thanks Macy, great vlog :) By the way, FYI Bambu released a model you can print to mount the AMS Lite on top of the A1, could help with space management maybe :)
Question: how's the noise level in your shop now that you have so many printers working together ?
Thanks again to share your journey with us! :D
The A1 is super quiet. All 4 p1ps running does cause some noise but you can't really hear them upstairs (they're in the basement) so it's not too bad. I can kinda film with them running but you can definitely still hear them in the background.
I moved my AMS on top and that Sunlu adapter is no good. Find the one that screws together. The one you printed will allow the spool the fall off if the printer shakes.
Love the Video! You can print out a mount that allows you to attach the AMS Lite to the top of the printer. Mine is setup this way and I've had no issues with it.
And if you’re not comfortable with that, for whatever reason, there’s a vertical stand you can print that works really well and is even more stable than the stand that came with the Lite. And with that, you can have it behind the printer, instead of next to the printer. That’s how I have my A1 mini set up.
Thank you! I’ve seen some mounted on top and I wondered how sturdy it would be. Maybe I’ll try it!
Very good video and I will not go back on the other comments speaking about the leftovers. I wanna advise about the way you have passed the PTFE and câbles inside the metal panel of the p1s. The movement will cut your PTFE and cable, you would better pass them inside the hole of your printed riser.
Merci et bonne nuit de France.
Haha thanks for not harping on my wasted filament. Noted on the ptfe tubes. I’ll try that out and see how it works
seems like there is a lot of pressure on the lines being routed through the hole as well as wear on the lines from movement making the extruder gears having to work harder to pull filament.
shes so beautiful and a little nerd like me, great video
Thank you!! 😊
you should print some cute little single colour keyrings with your scraps and include them as freebies for your customers. People always love free stuff :)
Working on some freebies now :)
love my A1 mini Combo and my X1C.. Im looking for something larger like 420 420 480 size ..
If you can find a print you can churn out that doesn't require customizations, maybe you can use the A1 Mini to burn through all that extra filament. Maybe something you can send along with your orders like a free keychain with your logo or something. There's also ways to donate printed items that I've seen before, but that certainly depends on having free print time.
Yeah finding the time is the problem. But seeing how upset everyone is with my filament waste I’m for sure going to try and come up with something 😂
Lol, let us know if you need help. The folks on the Bambu Lab Discord have been very helpful.
Is there a school or a maker space that can collect the ends of your filament rolls? Also that poop can be used for simple compression sheets
Did you see that the A1 was recalled? I don't know the full details since I don't have one, I think a cable rubs and can wear thru causing a fire hazard? Looks like you can return it for credit or get the parts to fix it.
have you tried getting a filament welder? you could make a big multicolor roll from all of your leftovers!
I finally broke down after swearing off bedslingers and got an A1 combo. Mostly because my wife wants to start doing craft shows and print multi color prints. Overall I’m pretty happy with it. I dislike the time it takes and waste from multi color prints but you just increase the price. I have to say the color changes on the model are very nice and seem less. Only thing I don’t like is lack of tools for painting parts but they could always add more.
ouch
When my roll runs out in my P1S AMS the print will stop and lets me know its waiting for me to put in another roll. I just put a new almost empty roll into the SAME slot and press RETRY and the printer just continues as nothing happens. So before I open a NEW roll I at least try and use up the two or three empty rolls. Its NO hassel except for putting in the roll. No waste. Best I can do.
For anyone who is just using the A1, please don't forget to print the official guard for the sensors cable (the one that is coming from behind the printer). If the cable is damaged and the sensors can't register the bed temperature correctly, there is a very high chance of the printer to combust or at least have fuses activating.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Bambu made an oficial post on their site on this.
Them plastic rolls can be used for other things!
Donate unused filament to someone who can turn it into good filament!
Birdhouse condo
Dang... I'd buy your leftover filament.
Whenever you add remove or change the position of the ams on a printer you should rerun a calibration. The center of gravity change can affect the harmonics and input shaping settings. It may not seem like a big deal but it can be. Some people even re run calibration when they change the printers location/ orientation on a table.
Noted, thanks for the tip! :)
I just ordered a P1S and was watching your video here with you setting up the risers for the AMS. Why do you prefer them gapped up like that? Figured I might as well find out from somebody doing it! Thank you.
Makes it easy to look down at the print while it's going, without hunching down and having to open the door etc
3:29 Tada 3D Printing put out a video on a bambu waste chute with a pull tray, so you don’t have to reach around to get your Tupperware like tubs. Maybe the end rolls could come in handy 👍
Is ams lite worth the monez if i want to print just with single color ( I will print mostly PLE, time to time PETG)
Nevermind the last bit of filament, throwing out the spool rings bothered me. Do you print new ones every new roll?
It's just electrical tape on the edges of the cardboard spools. I don't use spool rings.
Oh, my bad 😆
OT, Macy I will make the clip I said, but I have been sick for weeks now (COVID + 2nd round of something) and I feel and sound awful still. soon...
how s it been printing so far waiting for mine?
+1 for finding a way to use those leftovers, not to mention not throwing away the rings you printed to make the cardboard spools work better with the AMS. Those must be re-usable?
It was just electrical tape over the edges of the cardboard spools. I’ll keep thinking of ways to use the leftover filament. I hate wasting it but I can’t just keep hundreds of almost empty rolls laying around.
If its the same Color you normaly use your AMS will automatically swap to a new spool when one is empty. Then you will Get to use everything😄
@@macymakes3d it is possible to join to rolls of filament together by heating them up and squishing it together. There is an increased risk of jamming but I believe there are tools to help with stick the filament together. Probably not worth the risk for your business though...
If the spool join suggestion doesn't work, what about just printing the leftovers into little cutesy things that can be tossed into your shipments? People dig that kind of stuff. The trick is finding something small and cute that you like and is OK, or designing your own.@@macymakes3d
Working on some freebies! You guys gave me lots of ideas for ways to use up the “waste” 😁
Hi, I like these videos. What was your reason to try the A1 ?
Just wanted to try it out and see how it compares to the P1P since it's quite a bit cheaper. Still a p1p fan for sure though.
I would have used that leftover filament to make the SunLu adapter 😂
Or the AMS risers?
Or just use the AMS autoload feature and have a multicolor print where you don't care where the colour change is.
That's what I was thinking watching it 😂
I reuse the poops.. melt them and make other things in molds.
lol
Still a few days away from my A1 combo to arrive. Super excited. Upgrading from an anycubic I3 mega-s.
But daaaaaaang so much waste!
Can you close the lid on the AMS with the Overture spools with the rings attached?
I don’t have rings on them. I just tape the edges with electrical tape. But yes I can close the lid
@@macymakes3dthat’s a good idea! Thanks
Impressive Macy. I have an Anycubic Kobra Max and I3 Mega. Now also have the A1 (not unboxed yet).
I started using my Kobra Max (Dec-23) which then refused to print after a months of prints. I changed the hot end 4 times, checked the cable plugs around the head, check the cables for kinks and auto leveling would throw up errors which made no sense for what I could see.
Tried everything I could find on the net with no success and then in my frustration of trying fixing it I ordered another Kobra Max this time the '2' version, however It dawned on me much later (after I order the new one) that maybe the plug was the issue and so I re-flowed the cable socket and wham it works again. Damn need to be more free thinking before ordering new stuff.
Now I have been successful so far with the fixed Max and hopefully the A1 will add more capabilities to my growing list of printers.
My question for you is how do you keep the filaments dry enough for printing after they are opened, noting the A1 and the non-AMS printers both have exposed filaments. Do you intend to buy a pre-made version or are looking to build you own?
I only use PLA and the moisture doesn't seem to bother it too much. I keep the rolls in dry boxes when they're not printing but I'm not sure how much that even helps really.
Why do you trash all those spools?! 😱 The AMS is perfect to use the spools to the end. Just dry them and use them. What about the silica bags? Just dry them and they are perfect to stay inside the spools that have slots and help them stay dry. Probably I'm stating the obvious and you just don't care all the trouble 😂
This is just the rolls with less than 30 grams. I keep everything over 30 grams for future use upstairs. I can’t use multiple rolls for the nameplates I sell because it leaves a hard line in the print when the filaments change and that’s not sellable. I don’t really print much besides nameplates so it’s tough for me to keep hundreds of “empty” rolls because I dont have that much space. I’m going to try and come up with some smaller things to print and use up some of the waste now that I’ve seen how much you guys care about it ❤️
At the end what are those black rings around the cardboard rolls and what do they do?
You had no issue with the. AMS lite feeding at all? I just got mine and spool #3 never works...keep getting AMS1 #3 motor is overloaded error and no troubleshooting has solved it yet...
The black rings are just electrical tape on the edges for the regular AMS. And I had one issue with the AMS lite but it was with a new sunlu roll. Even with the attachment I printed, it still wouldn't feed the brand new roll. It did fine with emptier rolls though
@@macymakes3d ah ok....and what did you do to solve it not feeding? #1,2 and 4 run perfectly smooth no issue at all...#3 simply won't load the filament... doesn't even grab it to start...I've tried all the suggestions to make it work... nothing yet... apparently there's hundreds of people with #3 causing issue... so weird...
I have no clue. Maybe it’s a bug and they’ll patch it with an update soon? Hopefully you’re able to get it fixed! 🤞🏼
@@sibertiger17I've had that issue with some filament, my sunlu pla silk To solve it i just had to cut the filament to into a sharp point and then the AMS lite grabbed it and pulled it though.
Also make sure your ptfe tubes are in nice gentle arches. In other words, keep your ams lite near as possible to the printer.
@@BennyTygohome I have tried 5 different rolls, same errors...all cut into angles...there is no bends in the tubes different than the others that work just fine...I think it's the motor in the AMS lite tool head...it makes weird sounds like it's stuck...but nothing is stuck.... Bambu service is absolutely crap...not a single response from them in weeks after multiple tickets sent in...
Possibile che nel 2024 non fai la raccolta differenziata ♻️?
Did you receive the email from bambu, about the cable problem?
Nice video. i want to buy an A1 to print with my 12y old son. But he is really sensitive to smells , allergen , pollen......and i wonder if the filaments can create micro particles or fumes or chemical vapors that can harm health.
i hope you can comment.!
tks
I spy a Hornady ammo hand loader press back there. Do you have guntube channel?
Lol no that's my husbands hobby. You don't want me anywhere near that stuff haha
Hey I have the same bullet reloading press and I throw away filament scraps too! I suspect the comments on this are from uh, let's just say the type of people that don't reload 😄 There's a huge overlap in the 3d printing community with real soft types. Do whatever you want, it's your money and filament and represents about a trillionth of the waste generated every day in cesspools like San Francisco, where they can't even stop pooping on their own sidewalks.
I'm not seeing the Amazon basics battery backup in the description like you mentioned in the video
Just added it! Sorry, I knew I was forgetting something... Says it's out of stock but hopefully restocking soon!
amzn.to/3O04B3Y
@@macymakes3d No problem at all, thanks so much for what you do for the community!
are you gonna return it?
Wow. That's a lot of wasted filament. And you are using AMS units? I'll pay you to ship me all that filament.
What was the reasoning for going w/ the A1 rather than another P1? Was it just to try it? Price? Seems like a small step backwards, though I seem to have been reading that the A1 does some things better than the X1/P1....but probably some things worse too!
Still inspiring me! So jealous of your printing success! LOL
Just wanted to try it out. I'm going to do a full comparison video of the 2, but I'm still a p1p girl lol.
those poor leftover filaments LOL
"It's only 33 grams"
(looks at trash bags full of near empty spools that were thrown away) LOL ¯\_(ツ)_/¯
dawg dont throw these leftovers send them to me fr..
3rd
you should find someone to donate those left over filament. take them off the spool and ship the filament only. ill pay for shipping!
I also had this thought but I'm in UK 😂
If you put the limit that fits in a flat rate usps box I’ll take it! Name your price for shipping and price per kg. !
I was similar to you in that I essentially bought the A1 straight away. I initially had issues printing PETG from a “budget brand” but it was mainly caused by my greediness in trying to print everything super fast. I’m also unsure about my belt tension (if it’s correct or not) as I get banding when printing benchies (but not printing more organic style of prints). Otherwise I love my A1. I also have my AMS mounted on top and haven’t had any issues. My benchy issues were happening both pre and post top mount
Sorry that the printer is now a fire hazard
So sad to see you wasting some filaments.
what a waste
People like her are part of the reason some people think 3d printing is so bad for the environment.