Volkswagen Dipped Beam Headlight Bulb Replacement - MK7 Golf - DIY
Vložit
- čas přidán 26. 08. 2024
- In this short video, I will show you how to replace the dipped beam (low beam) headlight bulb on a 2015 VW Golf MK7. This process will be very similar on vehicles of similar age made by VW, AUDI, SKODA, SEAT & others.
Affiliate links:
The standard H7 Halogen bulbs: amzn.to/461yLux
The H7 OSRAM Night Breaker 200% brighter bulbs: amzn.to/3qYUcNU
If you found this video useful, please don't forget to like and subscribe. Thanks for watching.
Disclaimer: Please carry out this job at your own risk. I accept no responsibility for damage or injury caused by following this video. It is meant as a guide only. Stay safe.
Incredible how VW build their cars. They start with the headlight bulbs then build the rest of the car around the bulbs. Ingenius !
This video makes it look a lot easier than it is, this guy is skilled! If you look at the bulb from the front you can eventually see it poke through and it will help you line it up - this helped me once I realised I could watch it come through
This video make it look soo much easier than the others ive found, where you have to pretty much dismantle the front of the car!!
Thank you, I’m glad it’s easier to follow 😊
Thank you for the instructions! For those like me with a large hand, I recommend using a monkey wrench to turn the plastic connector. It worked for me.
Thanks mate. Your video saved me a lot of time and effort
Thanks for showing both sides!!
Excellent and very informant clear little video. Miles better than similar (but confusing) videos out there and straight to the subject matter. After watching made the 2nd attempt a 5 minute job to replace both bulbs. 👍
Thank you for your feedback, really glad you found it easy to follow 😊
Thank you for this video, you just proved it can be done without stripping the front drill and lower arch liner out lol. Will go find someone with small hands to assist me 😆
Haha good luck 😊
Brother you're good! the drivers side is a real PITA! for some reason my bulb keeps falling out the socket so I end up pulling out the wheel well. Whatever car I buy next I will definitly check out how to install a bulb as I would have never bought this car.
You must have the grip strength of the Hulk. I could not get the plastic cover off for my low beams. Daytime, super easy.
This took me 2 hours 😅
So I do not need to jack the car up after all. Thanks for uploading the video.
Thanks for that this helped a lot, it was nice and easy cheers
great video, made it easy
Keep going brother with those good videos we need it ...😊😊😊
I have upgraded package and it's a pain in the butt
When replacing drivers side globe there is another cover next to it
If you twist it an turn the plug doesn’t come out and has small wires attached does anyone know what it is for?
Thankyou Sir! Nice video!!
Ive done it once 4 years ago and now the light has burned out. Man what a pain in the ass it has been trying to replace the driver side bulb. So far ive only managed to drop one bulb into the abyss 😮
Decent video well done
Thank you 😊
Hi bro I just tried to change my bulbs and for some reason it won’t come back on any reason why ?
Hi mate, if it’s the correct lamp there’s no reason it shouldn’t work… unless it was damaged in the post. I don’t think you would have blown a fuse 🤔
@@TurnersWorkshop97 no i basically took it out to see how I would need to change it if I needed to and put it back in and it didn’t work
@martindeluca5069 both sides not working or just the one you removed? It could be that you broke the filament when you removed it or it’s not quite twisted back into position?
What are the so what are the other light bulbs in the headlight? I’m trying to make them all LED
The main headlight bulbs:
Halogen:
Dipped beam - H7 (like in video)
Main beam - H15
Front FOGs - H11
Front indicators - H21W
Did you need to clear the error for the light after that?
Hi, no need to clear it will automatically recognise the new lamp
Do the new OEM expansion tanks contain the silica bags ?
I don’t think the new oem ones contain the silica bags because they have moved to a coolant which doesn’t require them :)
the bulb holder wont twist, my hands are all blue at this point
I don’t have that access point in my MK7 GTI. Strange, no obvious way to hey to the glove.
cant take it out
What a fucken nightmare I'm thinking of scrapping the car because of this.
Why make it so difficult
Unfortunately the designers don’t think of the people who have to maintain them 😁
Nice one . saved me going to garage .. they told me it was headlamp out to get to it ... passenger side was a bit more fiddly.. ask Donald trump to help with his small hands ..
1:51
It's better design that of my Fiat Stilo, chaining bulb is nightmare. Cursed Italian engineers
Don't know why CZcams recommended this but hey if i buy Golf or Polo i have knowledge how to change the bulb
Absolutely terrible design for maintenance,the best system is by Volvo as you simply pull 2 long pins & the whole headlight unit comes out.
That’s exactly why I prefer the older stuff, much nicer to work on! 😁
Hello, please help me, I have a VW Golf 1.2 tsi petrol, I want to change all the front bulbs but I don't know what they are.
VW GOLF 2013
The main headlight bulbs:
Halogen:
Dipped beam - H7 (like in video)
Main beam - H15
Front FOGs - H11
Front indicators - H21W