DIY | How to fix Cheyenne Hawk Pen (Gold Version!)

Sdílet
Vložit
  • čas přidán 11. 06. 2017
  • my seccond video shows How to repair Cheyenne Hawk Pen step by step
    if u have any question:
    My fb. / naigorszytattoo
    My Web. www.igorsztattoo.wordpress.com/
    Insta. / naigorszy_tattoo

Komentáře • 72

  • @naigorszytattoo4198
    @naigorszytattoo4198  Před 5 lety

    Pls follow me on insta :))
    instagram.com/naigorszy.tattoo

    • @aldotorres1717
      @aldotorres1717 Před 5 lety

      HELP !!! Am having trouble with my hawk pen the metal bar that pushed the needle out wont do it do you think it has to do with the soring as well

  • @shufflefighter99
    @shufflefighter99 Před 4 lety

    Where do i need to lubricate arter i out the new spring inside ?👍🏼

  • @haraldpettersen3649
    @haraldpettersen3649 Před 5 lety +1

    My first problem, will be to lay may heands on one of those Cheyenne Hawk Pen. I have cartrigdge grips , and a pile of cartridges and have ..........almost tried ( a inch , no two) . My wife (laughing behind me in the bed) and i am . Thank you for the good tip and video, And good luck in the Olympics for Electro Taping 2019 (your twisted right-handed turn structure was advanced and well considdered 🤪) . I have subscribed , so can you teach mee something new and i can tell stories about "the good old days when S&R was the on and only way and coils ruled the world " Keep up the good work .

  • @dennisolayan9635
    @dennisolayan9635 Před 6 lety +1

    hi, thanks for this video, can you pls comment the measurement of the spring,, including the tension,,, thank you

  • @asarvajao
    @asarvajao Před 5 lety +5

    Another video with the same mistake... sorry but in fast motion we can not see how you put the spring...

  • @seetysavage1289
    @seetysavage1289 Před 5 lety +6

    Need a slower version no clue how u find the spring or replace it

  • @ericmolnar8230
    @ericmolnar8230 Před 7 lety +1

    What are the spring dimensions? Length? Outer diameter ? Inner diameter? Total coils? Please.

  • @malinfluenciia
    @malinfluenciia Před 6 měsíci +1

    I have a problem and I can't open my Cheyenne, it's too tight and I can't turn it open.

  • @willowdpillow9806
    @willowdpillow9806 Před 4 lety +1

    Hi there! Thanks for sharing the video! It helps a lot!!! My problem is the mechanism stuck. So I’m now sure should I take them apart? Or do you have a tutorial on CZcams. Thanks for sharing anyways 🙏🏽

  • @kateliu4538
    @kateliu4538 Před 2 lety

    Nice video! 👍 My hawk pen has a loosened cap near the cable
    connection which I can twist it and open it, do u have any idea how to make it solid that couldn't move at all? Thank you so much! 💖🙏

  • @Mlabrepair
    @Mlabrepair Před 5 lety

    Dove posso comprare le molle di ricambio? grazie

  • @INKLOVERZTATTOO
    @INKLOVERZTATTOO Před 9 dny

    Hallo sir, can u please reply me the spring details.🙏🏻

  • @zynchuty4754
    @zynchuty4754 Před 5 lety

    Hejka skąd wziąść takie sprezynki???

  • @johneferguson7848
    @johneferguson7848 Před 4 lety +1

    My pen won’t stay running

  • @saintslockup9844
    @saintslockup9844 Před 2 lety

    Okay a problem I have the cord that connects to the power supply and tattoo pen I had to bend the cord at the top to make it work and now all of sudden it stop working

  • @pepik321
    @pepik321 Před 6 lety +1

    The stem from bmx is better :) Mostek (wspornik kierownicy) od BMX jeśli masz pod ręką to polecam :D Odkręcany element maszynki idealnie pasuje w miejsce kierownicy. Niczym dekiel z równym dociskiem

  • @irisyeung3823
    @irisyeung3823 Před 5 lety

    Hi there can I know the spring size of the pen ? Thank you

    • @asarvajao
      @asarvajao Před 5 lety

      Iris Yeung It is in the video...

  • @aleymoreno7318
    @aleymoreno7318 Před 7 lety

    I was wondering is there any screws on the body of hawk pen ? Did you open the screws and then unscrew the body or just unscrew the head from body ?

  • @braki6758
    @braki6758 Před 4 lety +2

    How you opened this pen, i am trying and trying and trying... i push like animal and its not possible... I do everything with tape like you and its not possible to open... i really dont know what to do, please help!!!
    Thank you!

    • @naigorszytattoo4198
      @naigorszytattoo4198  Před 4 lety +2

      Would u like to heat up machine ? Be careful of motor position. Simple hair dryer is good to do that

    • @braki6758
      @braki6758 Před 4 lety +1

      NaigorszyTattoo I tried everything, I finally make it but with WD40. I put WD40 and wait 2 days, after that it wasnt so hard! Thank you anyway!

    • @lexy3307
      @lexy3307 Před 4 lety +1

      How did you put the wd40 there? Only by the sides ? Or as well through the hole in middle? Have the same problem here..

  • @chamchowder3116
    @chamchowder3116 Před 6 lety +1

    what type of lubricant did you use?

  • @youngjordan9942
    @youngjordan9942 Před 3 lety

    Where can I get the springs in the us

    • @deo_mardeo
      @deo_mardeo Před 3 lety

      Get a guitar string #0, then get a standard needle cut the needle and the loop then put it in a drill as long with the string then roll the chuck of the drill for about 10mm depends on your stock spring..sorry for my english hope it helps frm philippines here

  • @Svshislayer
    @Svshislayer Před 6 lety +2

    Hi is there anyway you can send me a picture of the spring length on Instagram I already got a bic spring and opened the cheyanne its dekutattoos thanks!

    • @kaneweatherall
      @kaneweatherall Před 6 lety

      greenwind713 add me on Facebook and il send you a picture of one

  • @JD-yg3qq
    @JD-yg3qq Před 7 lety

    Hi... can you tell us where to buy the springs?

    • @JD-yg3qq
      @JD-yg3qq Před 7 lety

      Thanks Igor... will add you on whasapp

    • @TheMindOfMrfiggs
      @TheMindOfMrfiggs Před 7 lety

      U can get them from any tattoo supply companies they sell them along with different rotary machines

    • @thebriardude8087
      @thebriardude8087 Před 5 lety

      Name one.

  • @aliceshusband4436
    @aliceshusband4436 Před 5 lety +2

    What are the specs for the spring

    • @aliceshusband4436
      @aliceshusband4436 Před 5 lety +1

      Boys I got the specs 0.3x2.4x10mm you can sub 2.4mm with 2 or 3mm

    • @jpunski
      @jpunski Před rokem

      Where can you buy the springs from.

  • @milanboros9454
    @milanboros9454 Před 7 lety

    can you please send me the link where to order these springs ? i cant find it anywhere..thank you

    • @naigorszytattoo4198
      @naigorszytattoo4198  Před 7 lety

      Milan Boros aspring

    • @Jazzy55RiseAgainst
      @Jazzy55RiseAgainst Před 7 lety

      Hey there! What was the link? I googled those words below and nothing..

    • @aleymoreno7318
      @aleymoreno7318 Před 7 lety

      Jasmine Ottenson yeah me too didn't find any. Did you find one please let me know as well! Thanks

    • @moochietat2231
      @moochietat2231 Před 7 lety +1

      He said that he uses the spring outta a BIC lighter

    • @naigorszytattoo4198
      @naigorszytattoo4198  Před 7 lety

      Jasmine Ottenson internet is not everything ... Heh name of company is Aspring. Located in Poland in my town. Order just by yourself

  • @hackovictattoo853
    @hackovictattoo853 Před 3 lety

    witam , czy zrobyl bys mojego pena ?

  • @handpokedmrowa5761
    @handpokedmrowa5761 Před 4 lety

    Gdzie można kupić taką sprężynę w jakim sklepie ?

  • @jackcottrell9822
    @jackcottrell9822 Před 2 lety +2

    Video is far too fast, cant see how you remove the sliding rod to actually replace the spring

    • @idzi756
      @idzi756 Před 2 lety

      All u need to see was show on video :)
      U can stop video and play again :)

    • @jackcottrell9822
      @jackcottrell9822 Před 2 lety +3

      @@idzi756 its sped up so much you miss the most important part even when trying to pause it why show how to open the pen at normal speed but the important part is sped right up making it hard to see how its removed.

    • @idzi756
      @idzi756 Před 2 lety

      @@jackcottrell9822 check other video witch black cheyenne

  • @josespiri5223
    @josespiri5223 Před 7 lety

    donde puedo obtener el spring?

    • @naigorszytattoo4198
      @naigorszytattoo4198  Před 7 lety

      jose spiri www.translate.google.com -> just polish or english !

    • @TheMindOfMrfiggs
      @TheMindOfMrfiggs Před 7 lety

      Any tattoo supply company sell springs for rotary machine just look up your local one

    • @naigorszytattoo4198
      @naigorszytattoo4198  Před 7 lety

      Crs Figueroa i thik that only stigma can Send some spring

    • @TheMindOfMrfiggs
      @TheMindOfMrfiggs Před 7 lety

      igor szczukocki your right but out here in the us supply companies sell them ..for example unimax tattoo supply .. painful pleasures ..Neo Tat has the springs for it.... that's what I use and thank you for this video it save me time and money

    • @ortieflamme3500
      @ortieflamme3500 Před 6 lety

      Crs Figueroa Hi! Do NeoTat's springs fit with Cheyenne Pen? Thanx!

  • @markkennethagdios2603
    @markkennethagdios2603 Před 8 měsíci

    eh pano po yung bagong bili pero dipo natuloy yung pag ikot

  • @OrhanMamedov
    @OrhanMamedov Před 6 lety +1

    Check your Instagram DM please 🙏

  • @Kolba_Team
    @Kolba_Team Před 6 lety

    Lol colore dont meter