Shifter knob, cup holders, and console trim removal - 2020 Toyota Corolla
Vložit
- čas přidán 6. 08. 2024
- In this video I show how to quickly remove the shifter knob, cup holders, glove box, e-brake button, and gloss black console trim from a 2020 Toyota Corolla.
HOOK HAND TOOLS : amzn.to/2QZjBlc
MCGUIRE'S #2 fine cut cleaner : amzn.to/2X0SkTw
Polishing pads : amzn.to/3dNahdQ
MICROFIBER TOWELS : amzn.to/3bFe6Qt - Auta a dopravní prostředky
So cool. I'm doing mine soon as I'm installing ambient light cup holders
This helps. Thank you!
You are most welcome
Thank you. Helped a lot. 🙂
Thanks! Now I know how to replace the shifter knob with something else
Thanks for the vid dude! I just noticed my knob was loose and didn’t know how to properly pull the cover down
Awsome!
Thanks, I already install USB for second row
Very useful, thank you! :)
You're welcome!
Thanks for the video. I was hoping this would show how to clean the top panel from crumbs but it seems like the whole thing comes apart as one and not quite in pieces where I need to clean it, i.e. under the park and hold buttons, where I spilled coffee one time. Luckily, wires themselves in video look to be well covered.
I use glass cleaner to soften it up, and a pressurized keyboard cleaner, or compressed air to blast it out.
Hello friends, I have a 2019 Toyota Corolla petrol version. Occasionally, when I brake, an "A" symbol appears on the panel, and the car seems to go into standby mode. When I press the accelerator pedal again, it appears to restart. I'm confused about this feature and would appreciate any guidance on the matter.
Is the wire for the 12v socket available here, or is it better to grab an ACC wire at the under-dash fusebox?
@Problem Solver - what kind of connector s/ pins are useed for shifter to be powered by a electric system?
I only wanna replace the black plasti with the letter P to D is more easy?
Thanks for video
Your welcome
Your welcome
I was only looking to find out how to get my 2021 Corolla 12V charger things to work but for mine the sides of the cup holders look bad like some strong chemical or heat messed it up.. I might just go ahead and replace it all now after watching this video 😂😂
Yes. Deoderizer's like the tree, etc. can have a chemical reaction. people like to hang them around their shifter.
The shifter had more access points on the bottom left which exclusive for the Sport trims. So do you think it’s possible to access that “S” gear in our LE models?
I would have to look, but there is always a way.
Could you also remove the shift boot with all of the center console out like that
Yes. It looks like plastic clips hold it in place.
do you know if anyone makes direct replacements for all the shiny black trim like a matte finish ?
You could wrap it in matte black vinyl wrap for sure. I have done many bmw 3 series. I Wrapped black and white over the wood grain.
Hi please help me . I want to know the location of the parking indication switch. Or relay. My one same console . The reason is i want to bypass my vedio in drive mode. That brake bypass wire I wan to ground
Sorry I don't have the car to investigate that for you.
Do u have a video of u polishing that center console?
No but I just use Mcquire's #2 Fine Cut Cleaner.
Whats that plastic cover you lifted up about 3 minutes into the video
Lower dash trim that I'm showing just before 3:00
I was cleaning my car and ended up staining the glass, or plastic, or resin (not sure what it is exactly) to my Corolla console. It's the same trim as you showed, is there any way to remove an alcohol stain from there? I used a different brand of alcohol that I suspect may have had acetone in it as well because I never had a problem just giving it a quick rub down until I used that brand. It wasn't there when I finished cleaning it but when I left my car out in the sun I returned to find a few spots to be white. If you have any tips on that I would greatly appreciate it. I realize it was probably not wise to use alcohol to disinfect it now but I can't go back to fix it unfortunately. It almost looks like it seeped inside the clear plastic (or glass, or resin) and that caused the stain on the inside.
You can try to polish it with mcguires fine cut cleaner. If its under underneath you might want to just call Toyota for a quote on a new piece. Might not be to much...? Hope a polish works for you!
Thank you! I sincerely appreciate it! I will look into trying that out. If not then I guess I will just have it replaced.
Same happened to me. I want to know if Toyota sells that part so they can replace it? The plastic/glass finish side
My son has a 2020 Corolla LE hybrid His cup holders in the center console now are loose and the rear of them drop down into the lower part of the console. Any way to easily fix this with a new cup holder? They are about $85 but I have no idea how to just remove the cupholders and install the new one??
I will have to try and look at one. It may pull apart, and snap in place.
@@problemsolver8447 thanks. I just want to fix it for him. I found the part but have no clue what to do. He lives in Florida and I am in NY but visit him when I can.
What do you have to take all that out? Because if it breaks you got to replace it
It was all scratched up.
What if I install the se shifter would it do anything ?
??
That is what I wanted to know, too!
How does the shifter work
Gotta take it apart and look!
Is this similar for the 2019 Corolla?
Should be.
Pretty much the same process for the manual? Asking for a friend😅
probably close, yes.
Fuck no imma just cover my scratched up trim with a carbon fiber amazon one haha