DIY 3D Printed Curtain: Turn Waste Grass into Natural Air Conditioning
Vložit
- čas přidán 24. 08. 2024
- Learn how to create your own 3D Printed Curtain that turns waste grass into natural air conditioning! This easy-to-assemble curtain can be enhanced with a 12V water pump for continuous cooling, making it a cost-effective alternative to traditional air conditioners. It looks great on windows, saves on electricity bills, and removes room odors with its natural aroma. Design links available in the video description
Download here: bit.ly/naircooler
RC Motor Fan: bit.ly/3dprcfan
On Cults 3D: cults3d.com/:2...
#natural #airconditioning #ecofriendly #alishanmao #diy #diyideas #diycraft #3dprinting
Visit Our Site: createc.store
Buy Me a Coffee: bit.ly/alicoffee
My 3D models: bit.ly/2H3pxDH
Join Channel: bit.ly/joinali...
You can help support our channel by using our affiliate links. A small commission (At No Cost To You) helps us buy more items to review.
Это крутой эксперимент! Вода проделывает работу испаряясь и забирает часть энергии в виде тепла. Действительно практичный!
Имея 3D принтер, в зависимости от его разрешения можно попробовать создать максимально сетчатую, паутинообразную, микро ячеестую, объемную, структуру искусственно, еще больше способствующую испарению, за счет большей площади испарения. Хотя конечно с соломой надо будет еще по соперничать домашнему принтеру ) И по себестоимости солому догнать вряд ли получится ))
Good idea my friend. V2 is in the design soon :) Thank you
Make the boxes interlock and you could use them to contain the grass and food scraps as a compost heap.
Cool, man! But you should consider that the apparent temperature increases as the humidity increases, so for example if you take down the temperature by one degree you'll increase a lot the humidity and it's worse than before. So to make this system work you should make a very large filter so the sufficiently lower temperature compensates the higher humidity. Keep experimenting!
thanks for the tips
It's evaporative cooling.
Major disadvantage is you are introducing humidity into the air.
Higher humidity equals higher perceived temperature.
A/c units work by removing the humidity.
thanks for the tip
Wow nice buddy
Thanks
You might consider using a synthetic material, rather than grass for the membrane. The wet grass might foster fungal growth, and spew spores into your living space. Legionnaires' disease from using swamp coolers is a known hazard that has resulted in deaths. Getting only 1 or 2 degree change in the temperature may not be worth the risk of lung disease.
Тоже подумал о плесени. Но к счастью солому можно менять каждый день ) А любую мембрану придется менять, или мыть из за скопления пыли и тех же грибков.
Как вариант поставить более прочную структуру с вертикальным водопадом. Увеличив объем воды стекания.
Но в любом случае это ведет к повышению влажности в помещении, если не делать ее двусторонней из алюминия с испарительными ребрами с "рабочей" стороны )
Thank you for the information. Instead of grass, I can use thin membrane prints that will keep water flowing slowly through the plates. nowadays printers can print very thin lines easily. Thank you for the update. yes the idea was to change the grass regularly every 2 days or so. this is a big learning curve and i appreciate the feedback.
@@alishanmao I've followed your RC adventures for several years, and appreciate your innovations. If you don't use the excess grass in your coolers, you will, still, have excess grass... perhaps, you can get a goat.😎
@@Patriottoo2 Hi thanks for continued support. yes goat is a good idea. free milk too :)
Hi, is finish Chiness for you or not, bro ?
Yes china finished for us
@@alishanmao With children and wife ?
@@onclefly8450 yes of course. i can't leave my children and wife behind. Their Government (CCP) forced us to leave. they refused to give us visa and told me in my face that we are not welcome anymore. and that its time i leave their country and if I want i can take my family too. I was tired of begging for what is rightfully mine. The residence visa as i am married to chinese citizen and my kids are chinese. being spouse of 3 chinese, its my basic right to get green card or longer residence permit, but still they just refuse to give what is rightfully mine. they violate all the basic human rights in your face and you can't do anything about it. I could not take this anymore. So i had a window to take my family out of that surveillance state and I took it. and I am happy that i did.
I know now we are struggling financially and these are the toughest times in terms of money and finances in my whole life i have ever seen but I will not give up. i am working day and night to setup my 3d printing business and i am confident I will start getting orders. CZcams can't support our family expenses here, and youtube reviews are just too much work and no income. so i have to struggle and focus to setup my 3d printing business. Apart from that, yes my kids are happy. we rented an old house, its big, and huge yard as you have seen in my vidoes. i can fly helicopters here, no need to drive far. also we live close to majestic mountains and a clear water beach is just 5 minutes from our home, we go there often to relax and swim in the sea. in winter we go off roading in deserts and explore new places whenever we can afford to fill the tank of our gas guzzler 2007 Land Cruiser. weekends same way, we go fly electric paramotor by beach side. and Thanks GOD there are opportunities i see and i am running after them to get orders and business for us. i believe these tough times will not last forever. we will see a better life once again. Do remember us in your prayers. and Thank you for your continued support always.
@@alishanmao Great, a new life for your family in a new country !
Why not just buy an AC? This is way too much hassle. It would need constant replacing because of mold. Not to mention some orher disadvantages. But kudo’s to you sur for thinking outside of the box.
this is how we find new ways, i will keep experimenting