2.5" DJI O3 Toothpick? - NBD Savagebee HD
Vložit
- čas přidán 18. 03. 2024
- NBD: bit.ly/4aggr2B
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayquads.com?aff=58
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
Speedybee - www.speedybee.com/?ref=TRONCA...
BetaFPV - betafpv.com?sca_ref=1435233.qFHxUmh5f2
GEPRC - geprc.com/?ref=iJ5Pz1Je
Flywoo - flywoo.net/referral/troncatfpv
Banggood - www.banggood.com/custlink/v3G...
__________________________________________________________________________
My Go-To Gear:
DJI Goggles 2: bit.ly/3suTIQe
O3 Air Unit: bit.ly/3OYMwTb
TBS Ethix Mambo: bit.ly/49s7gNb
TBS Crossfire RX/TX: bit.ly/3qnUKbZ
Go-To Frames:
QAV 2.5” Cinewhoop: bit.ly/3FUh4BM
QAV Nano 2” Cinewhoop: bit.ly/3uiCJRA
HaloRC Kali: bit.ly/49ygfw3
Speedybee Master 5 V2: bit.ly/3rfuq7H
Other Equipment:
Torvol Backpack: bit.ly/3zU9G7j
Naked GoPro Hero 11:
GoPro Hero 10: amzn.to/3ILPAyC
GoPro Hero 11: amzn.to/3QtgQ9O
Blackmagic 4K: amzn.to/3QEnolY
Blackmagic 6K: amzn.to/3QxowYJ
DJI Air 2 S: bit.ly/3QERAfJ
Sony A7iii: amzn.to/3QvV82L
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support! - Věda a technologie
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Thank you Troncat for reviewing our Plastic Giraffe. Really appreciate it!
The "neck" looks so easy to break and also the prop wash is rather noticeable...maybe a decased O3 would shave some weight and help it fly better
Notice how after the crash, the DJI O3 is fine. It's designed to take a beating! I personally owned many O3 drones and have crashed a lot and O3s are tough. With something so light, there will be less weight that gets pushed onto the O3 when you crash so I doubt you will break the O3 that easily. The canopy looks thin but it's easily replacable for $7.99. This hobby is not supposed to be cheap anyway guys but don't tell me you can't spend $7.99 🤷
Looks Crazy and Cool, But it looks FRAGILE AS HELL...thanks for the vid.
I've flown the original SavageBee and it's hot fire. I know this thing is going to be hot fire too. Placed an order already. Can't freaking wait!
first from reunion island !
Weird electronic buzz in the left audio channel of the video.
i didn't notice till I saw this comment. Now it's making me go wild.
Love the Video, Do fix those whoop drones? or can you recommend someone? Thanks
The more I look at this drone, the more I start to like the plastic giraffe. Hate me for it but I'm buying one. I'll let you guys know how it flies!
I personally dig it. I'd like to see someone with a decased O3 with SavageBee. But I have a feeling that despite it being lighter, it's not going to take a beating well. Better to stick with the original. Better replacing a 7 dollar canopy than a 230 dollar air unit LOL
You should try fit a DJI Action 2 on the top since it is such a tiny camera with 4k recording!
To bad there's no STL files to reprint your own cages with different plastics or even TPU. I could just email kalvin and ask him if that's possible.
Which remote ID module did you install on this one? You need one for every new drone, right?
Didn't install an RID on this one. Video ain't monetized 😉
If i had to put RID on this I would use the BS though
@@TRONCATFPV I thought anything on CZcams would be 107 regardless. I guess that must be wrong info I saw.
Can you do a review on the xilo Stax
They need to make a BNF version with the 1S Walksnail and the original canopy design for freestyle.
Cool video and good review but.....please don't encourage DJI or any brands to add remote ID in a small drone like this and other cinewhoops.
I don’t think DJI needs any encouragement to implement RID in their drones lol. They’re just going to do it.
With drones like this, I’m suggesting an additional plug, similar to the O3 plug that’s already on there.
Why would you pick a plastic giraffe over something like the Proto25, Ordonata or something like that?
Not being rude, but isn't that unit upside down?
The O3 air unit?
Yes, the way they’ve designed the bracket it will only work if you have it in that orientation.
The power plug won’t reach any other spot, plus the antennas won’t reach their spot
@@TRONCATFPV wow, ok! That makes sense. Well it doesn't, to me, but I didn't design it and don't know the intricacies of the structure. Interesting. I'm now a subscriber to your channel as well. I'm very new to fpv and trying to absorb all I can. Now I'm off to figure out how to use the DJI O3 components to do the controlling as well. Lol. Probably pretty simple, but it's unknown to me. Thank you!
Haha as long as the camera itself isn’t upside down it doesn’t matter which way the air unit itself is oriented 👍
Using the O3 as the receiver for your controller is very simple actually. I’m pretty sure if you have all 6 cables hooked up to the O3, the two yellow and black wires make the O3 act as an SBUS receiver.
@@TRONCATFPV dude, thank you!
@@TRONCATFPV this is not the right place to ask I'm sure. If I use the o3 for that purpose, am I limited to the control settings inside the goggles? I think I'm not searching for the right terminology or I'm missing a big piece of knowledge or something.
Freestyle is officially dead with that quad
camera looks blahhh...almost vista
This thing’s ugly😄
A person is a TOTAL SUCKER if they buy this quad with the fragile 03 camera hanging way out in front just waiting to be destroyed! For one, it makes the quad completely unbalanced and therefore it will fly weird. Add to that the ultra fragile mount for the 03 and camera and this thing is a nightmare for all but the best of the best FPV pilots who virtually never crash... Are there pilots actually like that? We all crash, don't we?
This ridiculous quad is waiting for it's first crash to be smashed to bits! Why would they give you three 03 mounts if they didn't KNOW they were gonna break and break often?!
What happened to using a Naked Vista? See, there's a practical idea! I feel like ever since the 03 came out the Naked Vista or full Vista has been completely forgotten! It would be perfect for this quad! We have plenty of other ultra fragile cruisers! This is meant to be a freestyle quad!1. It would significantly lower the weight making it fly so much better. 2. It would almost eliminate the potential camera smashing with it's first crash as one could use the lightest and best image Nebula Nano Pro camera and easily protect it because it would be more safely hidden in the frame works. Not sticking out so far in front. 3. Also adding to it flying so much better, it wouldn't be out of wack in balance as that camera is ultra light and wouldn't have to stick away out in front. 4. The design would be vastly better as this quads design is idiotic and a nightmare! It never should have been brought to market!
Go ahead, buy this but be ready for disappointment when you smash that camera and break that mount into many pieces on your first crash! I warned you! 🤬🤷🤦
That plastic is pretty thin, I'm now down to one left after breaking one trying to install the O3 and crashing twice lol.
I dig the quad but yea, the weight is off a bit. Could be cool to do a toothpick like this but with the frame being in a deadcat form instead. May prevent props from being in the frame and could keep everything in-line like a normal toothpick.
Vistas are not produced by Caddx anymore. That is why you can only find them in second-hand markets. Also, making anything naked only makes the drone even more fragile. The casing from DJI O3 is actually designed to take a beating so it's more sturdy to have the full unit. The camera is up front so there will be no prop in view. I'd like to see if it's possible to make a 2.5" prop toothpick drone with no prop in view and have the camera stick to the back because it seems like there's no way right now.