Congrats on the successful DIY! I'm always impressed and pleased to see people tinker away and figure out a solution for themselves, especially when improving a factory made unit.
Good idea. Im using DJI 1 (model earlier than yours. What i have done is drill a tiny hole in the bottom of the drone and supaglue a tiny magnet. Then on the line I use a steel swivel or ring well above the rig so the rig drags well low on the drone. Fly the drone out... when the hook/bait/lure hits the water the Drone dips hard but it pulls the swivel fom the magnet.. job done. fly the drone in. With the DJI 1 i find cross winds very hard to cope with. Edit i think yours is a better system. im also fishing on 90mile.
@yakikadafi9221 Turn the letter U 90 deg clockwise. Then, top edge is cable tied to drone. Bottom edge is used to hang fishing rig on. Open side facing the front direction of drone. Essentially, the same concept of "releasing rigs" like this video.
found your channel with the fish deaths didnt know your channels a fishing channel you will have been eating that sealife oooh im in yorkshire england not the uk or britain where those british bnf's unionists killed a load of us with qe2's windscale
G'day Nobby, yeah I mainly do fishing on here.. I also do a weekly beach condition report, for anyone coming for a fish here on the weekend. Cheers mate 👍
Mate?, this is brilliant 😊
I still can't believe how well it works... Simple, and very effective!
Congrats on the successful DIY! I'm always impressed and pleased to see people tinker away and figure out a solution for themselves, especially when improving a factory made unit.
Thanks Andrew, I just wish I had've knocked this one up before spending money on one that doesn't work... lol
Sensational…..I am sure there will be many videos of fishing with the drone. Thanks for sharing Steve.
Cheers Mark... I'm already keen to give it another go... lol
Well presented Steve
Thanks Jim 👍
Thank you for a great diy as I was trying to figure out how to do it
Good idea. Im using DJI 1 (model earlier than yours. What i have done is drill a tiny hole in the bottom of the drone and supaglue a tiny magnet. Then on the line I use a steel swivel or ring well above the rig so the rig drags well low on the drone. Fly the drone out... when the hook/bait/lure hits the water the Drone dips hard but it pulls the swivel fom the magnet..
job done. fly the drone in. With the DJI 1 i find cross winds very hard to cope with.
Edit i think yours is a better system.
im also fishing on 90mile.
I had kind of a similar idea I was going to try with a clothes peg... but I didn't trust the clothes peg..lol
Well done Peter 👍
Awesome idea mate! Could wrap a bit of Velcro or tape around the drone to hold it to it.
Wow, well done. Pain in the butt most times to get the bait out far enough for surf fishing.
Very good idea bro thanks 🎉🎉
@@raulalejandrosandovalmeza4551 cheers.. thanks 👍
Thanks Steve
Fishingreminder is the guy that you want in New Zealand I suspect or I hope
Yes that's the one.. thanks Grant 👍
Mate go buy your self a out rigger clip , adjust the tension to we’re you hold the spool and it will realise the line works 1000000000%
It only works with the bigger drones i already tried it. The small drones dont have enough hp to undo it self
nice idea but the set up for three line don see good
Ill go one easier. Create a U shape with a piece of that fencing wire. Cable tie it to the drone.
What way does the u face?
@yakikadafi9221 Turn the letter U 90 deg clockwise.
Then, top edge is cable tied to drone.
Bottom edge is used to hang fishing rig on.
Open side facing the front direction of drone.
Essentially, the same concept of "releasing rigs" like this video.
Hi Steve, can you drop a link of the drone? Thanks mate.
It's just a DJI mini 2...
Definitely not designed for drone fishing.
Freaking genius , no need for a swell pro
found your channel with the fish deaths didnt know your channels a fishing channel you will have been eating that sealife oooh im in yorkshire england not the uk or britain where those british bnf's unionists killed a load of us with qe2's windscale
G'day Nobby, yeah I mainly do fishing on here..
I also do a weekly beach condition report, for anyone coming for a fish here on the weekend.
Cheers mate 👍
@@SteveOutside #exposethe28
TRUTH - JUSTICE - LIBERTY