𝟴 𝗪𝗮𝘀𝘁𝗲𝘀 𝗼𝗳 𝗟𝗲𝗮𝗻 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴 [ Lean manufacturing wastes ] Lean manufacturing waste elimination

This video explains the 8 different types of waste in Lean Manufacturing. Traditional lean identifies eight key areas of waste - typically referred to as the Eight Deadly Wastes and the acronym for the eight wastes is DOWNTIME.
🎥 𝐒𝐮𝐛𝐬𝐜𝐫𝐢𝐛𝐞 𝐦𝐲 𝐘𝐨𝐮𝐓𝐮𝐛𝐞 𝐂𝐡𝐚𝐧𝐧𝐞𝐥 : / digitalelearning
📹 𝐁𝐞𝐬𝐭 𝐋𝐞𝐚𝐧 𝐒𝐢𝐱 𝐬𝐢𝐠𝐦𝐚 & 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐓𝐨𝐨𝐥𝐬 𝐕𝐢𝐝𝐞𝐨𝐬
--------------------------------------------------------------------------------
🎬 Lean Manufacturing : • What is Lean Manufactu...
🎬 Lean Vs Six Sigma : • Lean vs Six sigma (6 s...
🎬 Value Stream Mapping : • What is Value Stream M...
🎬 Quality Function Deployment : • What is Quality Functi...
🎬 Six Sigma (6 Sigma) : • Six Sigma (6 sigma) | ...
🎬 8 Lean Manufacturing wastes: • 𝟴 𝗪𝗮𝘀𝘁𝗲𝘀 𝗼𝗳 𝗟𝗲𝗮𝗻 𝗠𝗮𝗻𝘂𝗳...
🎬 5S Methodology: • What is 5s methodology...
🎬 GEMBA Walk : • What is Gemba : Where ...
🎬 SIPOC Diagram: • What is SIPOC diagram ...
🎬 Lean Pull vs Push : • Lean Pull vs Push | Ju...
🎬 POKA YOKE (Mistake Proofing): / v0ygowej2k
🎬 Just in Time: • What is Just-in-Time (...
🎬 TQM - Total Quality Management : • What is TQM (Total Qua...
🎬 TPS - Toyota Production System : • What is Toyota Product...
🎬 TPM - Total Productive Maintenance : • What is TPM -Total Pro...
🎬 7 Basic Quality tools : • What are the 7 basic q...
🎬 FMEA (Failure Modes & Effect Analysis) : • What is FMEA (Failure ...
🎬 Fishbone Diagram : • What is Fishbone Diagr...
🎬 5 Why Root Cause Analysis: • 5 Whys Root Cause Anal...
🎬 Quality Assurance vs Quality Control : • What is the difference...
🎬 Plan Do Check Act (PDCA cycle) : • What is PDCA - Plan D...
🎬 Critical To Quality in Six Sigma: • What is Critical To Qu...
🎬 Drum Buffer Rope & Theory of Constraints : • What is Drum Buffer Ro...
🎬 Six Sigma Process Variation : • What is Six Sigma Proc...
🎬 Six Sigma Defect Metrics (DPU, DPMO & PPM) : • What is Six Sigma Defe...
🎬 Balance Scorecard ? • What is Balance Scorec...
🎬 Key Performance Indicators (KPI) : • What is Key Performanc...
🎬 New Product Development Process : • 𝐍𝐞𝐰 𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐃𝐞𝐯𝐞𝐥𝐨𝐩𝐦𝐞𝐧...
🎬 Product Life Cycle (PLC) stages : • What is Product Life C...
🎬 Fault Tree Analysis: • What is Fault Tree Ana...
🎬 7 basic quality control tools: • What are the 7 basic q...
🎬 5W1H : • What is the 5W1H Metho...
🎬 8D Problem solving methodology: • What is 8D Problem sol...
🎬 One Piece Flow Vs Batch : • One Piece Flow Vs Batc...
🎬 Line Balancing: • 𝐋𝐢𝐧𝐞 𝐁𝐚𝐥𝐚𝐧𝐜𝐢𝐧𝐠 | Produ...
🎬 Heijunka : • What is Heijunka in L...
🎬 Muda, Mura & Muri: • Muda, Mura & Muri - Le...
🎬 Takt Time vs Cycle Time vs Lead time : • Takt Time vs Cycle Tim...
⏱️ 𝑻𝒊𝒎𝒆 𝑺𝒕𝒂𝒎𝒑 ⏱️
--------------------------------
0:00 - Introduction
0:34 - 8 deadly wastes of Lean
2:27 - Acronym "DOWNTIME" for 8 deadly wastes
3:22 - Waste 1 ( #Transportation)
5:12 - Waste 2 (#Inventory )
6:58 - Waste 3 (#Motion)
8:10 - Waste 4 (#Waiting)
10:00 - Waste 5 (#OverProduction)
11:48 - Waste 6 (#OverProcessing)
13:35 - Waste 7 (#Defect)
15:17 - Waste 8 (#UnutilizedSkills)
📢📢 📢📢 𝐅𝐨𝐥𝐥𝐨𝐰𝐬 𝐮𝐬 𝐨𝐧 𝑺𝒐𝒄𝒊𝒂𝒍 𝑴𝒆𝒅𝒊𝒂
-------------------------------------------------------------------------
🐦𝐓𝐰𝐢𝐭𝐭𝐞𝐫 : / digitalelearni1
📸 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 : / digital_elearning
📩 𝐓𝐞𝐥𝐞𝐠𝐫𝐚𝐦 : t.me/digital_e_learning007
🙋🏻‍♂️ 𝐏𝐢𝐧𝐭𝐫𝐞𝐬𝐭: / digitalelearning007
🙋🏻‍♂️ 𝐋𝐢𝐧𝐤𝐞𝐝𝐈𝐧 𝐏𝐚𝐠𝐞: / 55180987
🙋🏻‍♂️ 𝐅𝐚𝐜𝐞𝐛𝐨𝐨𝐤 𝐏𝐚𝐠𝐞 : / digitalelearni1
💌 𝑪𝒐𝒏𝒕𝒂𝒄𝒕 𝒖𝒔 : [e-mail] for any business/ promotion queries.
✍️ 𝓓𝓲𝓼𝓬𝓵𝓪𝓲𝓶𝓮𝓻:
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. The information contained in this video is just for educational and informational purposes only and does not have any intention to mislead or violate Google and CZcams community guidelines or policy. I respect and follow all terms & conditions of Google & CZcams.
𝐂𝐨𝐦𝐦𝐨𝐧 𝐊𝐞𝐲 𝐬𝐞𝐚𝐫𝐜𝐡 𝐫𝐞𝐥𝐚𝐭𝐞𝐝 𝐭𝐨 𝐭𝐡𝐢𝐬 𝐭𝐨𝐩𝐢𝐜 :
----------------------------------------------------------------------
#Lean #LeanSixSigma #Digital_e_Learning #Project_Management #Lean #LeanSixSigma #SixSigma #Quality
Lean Manufacturing wastes
lean manufacturing 8 wastes
lean manufacturing 7 wastes
What are the 7 wastes in lean manufacturing?
What are the 8 deadly wastes?
What are the 8 Wastes of Lean?
What are the 7 wastes in Six Sigma?
how to reduce waste in lean manufacturing
7 deadly wastes lean manufacturing

[@DigitalELearning]

👀 Hello Friends, 𝐉𝐨𝐢𝐧 my 𝑺𝒐𝒄𝒊𝒂𝒍 𝑴𝒆𝒅𝒊𝒂 𝑳𝒊𝒏𝒌 for regular updates:
------------------------------------------------------------------------------------------------------------------
📸𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 : instagram.com/digital_elearning/
🐦𝐓𝐰𝐢𝐭𝐭𝐞𝐫: twitter.com/DigitalELEARNI1
📢𝐓𝐞𝐥𝐞𝐠𝐫𝐚𝐦 : t.me/digital_e_learning007
🙋🏻‍♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐋𝐞𝐚𝐧 𝐬𝐢𝐱 𝐬𝐢𝐠𝐦𝐚) : whatsapp.com/channel/0029VaAUuqs4inooet3e4S3O
🙋🏻‍♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐒𝐢𝐱 𝐒𝐢𝐠𝐦𝐚 (𝟔σ ) : whatsapp.com/channel/0029VaEWKWbIiRovZpAduc0p
🙋🏻‍♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐒𝐭𝐚𝐭𝐢𝐬𝐭𝐢𝐜𝐬 & 𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡) :whatsapp.com/channel/0029VaAGwzTDJ6H9S5Q4Ow0m
🙋🏻‍♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭) :whatsapp.com/channel/0029Va8slQdEAKWAhXoQK13B
🙋🏻‍♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐀𝐬𝐬𝐮𝐫𝐚𝐧𝐜𝐞 & 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐂𝐨𝐧𝐭𝐫𝐨𝐥) :whatsapp.com/channel/0029VaAKJBGKGGGDjcK4mw2h

[@angelaiglesiallano4551]

0

[@FlatEarthTheory]

Very informative, thanks

[@DigitalELearning]

Thanks Max 😊

[@Kumar-du2pr]

fantastic my friend. thank you

[@DigitalELearning]

Thanks 😊

[@chinnuthoombath8028]

Very informative vedio. Thank you🥰

[@DigitalELearning]

Glad it was helpful! Thanks 😎

[@babarsk8784]

1True 2 false sample size inversely proportional to standard error

[@shashankkumarashokkumargup3264]

A better way would be to call it as TIMWOODS:
T=Transport
I=Inventory
M=Move
W=Wait Time
O=Overproduction
O=Overprocessing
D=Defects
S=Skills

[@DigitalELearning]

Exactly 💯

[@sixsigmamania]

DOWN TIME is even better.
Deffects
Overproduction
Waiting
Not used talent
Transportation
Inventory
Motion
Extraprocessing
What do you think about it?

[@deepakpandit2772]

In downtime O denotes over production and E also showing the same excess production?

[@athulsunil7683]

E denotes excess process

[@rinkuthakur2888]

What is the difference between over production and excess production?

[@DigitalELearning]

Hi Rinku,
They both are synonymous having same meaning. i.e. to produce more than what is desired by customer

[@guidomarquez3230]

@@DigitalELearning q

[@rawtodelicious3824]

TIMWOOD
T-transportation
I-inventory
M-motion
W-waiting
O-overproduction
O-overprocessing
D- defecte

[@DigitalELearning]

Anju : Exactly.. Thats is acronym we used to remeber these deadly wastes

[@olukayodeajagbe4799]

Skill is missing

[@latestmoviez2023]

Excess or over production is same...second one is over processing

[@DigitalELearning]

Correct. Thanks for feedback

[@LovepreetSingh-md7fn]

👍👍👍👌😊🤗

[@DigitalELearning]

Thanks Lovepreet

[@haseebmalik3046]

Hindi ma teach kia kren agr English ma parhna h to hm book sa na pr ln

[@rinkuthakur2888]

What is difference between rejection and scrap

[@DigitalELearning]

Rejection is when customer rejects your production on quality and scrap is when you cannot work on that rejected parts to make it correct and then scarp these parts finally

[@aseeljalal2869]

@@DigitalELearning مرحبا ٦غفف

[@goldenkt1009]

Rejection can be sumthing which does not meet the customer specification .nd scrap is sumthing which is of no use

[@bondniko]

Not possible to comprehend due to the pronunciation

[@DigitalELearning]

Feedback noted

[@user-gt7ew7kx6s]

I understand hahah wven though im korean. No any issue on pronunciation. Learn many style of English @bondniko

[@DigitalELearning]

@@user-gt7ew7kx6s Thanks 😊