Mitsubishi L200 (MK3 K74) Gearbox & Diff Fluid Replacement (4D56) -- Part 7
Vložit
- čas přidán 28. 08. 2024
- This is my 2003 Mitsubishi L200 project. It’s a K74 with a 2.5TDi engine, manual gearbox with locking rear diff. I bought this vehicle as a non runner and will be getting it back into working order. Join me for the revival.
Fluid Capacities:
Front Diff - 0.9L
Gearbox - 2.3L
Transfer Box - 2.2L
Rear Diff - 2.6L
Sockets:
Front Diff - 24mm
Gearbox - 27mm
Transfer Box - 24mm
Rear Diff - 24mm
Torque:
All - 70Nm
Fluid Type:
Front Diff - SAE 80W GL5
Gearbox - 75W-90 GL-4
Transfer Box - 75W-90 GL-4
Rear Diff - SAE 80W GL5
This is a list of affiliate and non affiliate links to the parts I used for the repairs:
Coolant -- ebay.us/IHf2qR
Oil Filter -- ebay.us/q03QOl
Fuel Filter -- ebay.us/TSy273
Oil 5L -- ebay.us/7elX4y
Timing Belt Inc Tensioners -- ebay.us/sHzukW
Aux Belts -- www.eurocarpar...
Crank Bolt -- ebay.us/y38gpQ
Front Oil Seal -- ebay.us/Fxrtnv
Cam Cover Seal -- ebay.us/bSDfoS
Water Pump -- ebay.us/WsCmkN
Radiator -- ebay.us/OmdRIf
Thermostat -- ebay.us/O6ejaK
Coolant Temp Sensor -- www.milneroffr...
Head Assembly -- www.lymmengine...
Glow Plugs -- ebay.us/kZ12sE
Injector Washers -- ebay.us/8DIZ4f
Sealant -- ebay.us/XfwccI
Injector Tester -- ebay.us/2PT0qb
Upper Ball Joints -- ebay.us/qt8qqU
Battery -- www.eurocarpar...
Stack Pipes -- www.milneroffr...
Thank you for sharing this, very helpful. 👍🏼
Very helpful - thx🙏🌞
You have been extremely helpful in my 200 rebuild but you mention quantities but you filled to the level of filler point ?
Yeah, quantities are from the owners manual, sometimes when you drain you can't get everything out, they may be quantities for a dry fill. In my opinion, so long as you're somewhere close to them it should be okay, ultimately you can't fill higher than the full plug anyway
Great videos, thanks for doing them, just bought one and very helpful
No problem, glad they help. Is there anything else you'd like to see?
thank you!
Great video!
Can I ask what size copper washers you needed?
Cheers
Thanks, I don't remember I'm afraid, I just have a large assortment of them. The head sizes are 24mm and 27mm which if they're ISO would be M16 bolt diameter. If you can just grab a box of mixed ones so you're covered that's probably best.
No problem, I was planning on getting a miked bix but needed to figure out the biggest size I need.
The box I have is M8 - M24, was pretty cheap and covers all things I've gone across so far, I'd go for that range if you can
Hai I'm Steve
How many theet the big gear have the pinion have 11 theet from the front differential
hey thank you for this nice video.
I have a 2004 pajero sport which is K90N, I can't find the quantities, do you think it's the same as yours ?
It's hard to say, if it's 4D56 engine, I guess they'll be close but can't comment if they'll be exactly the same
Ok thank you, I will see at the moment.
I have 75W90 which is GL-4 and GL-5, it should go for both differentials and gearbox/transfer box ?
is there any problem that l have not found the 75 90 gl4 for transfer box but instead l put 80 90 api gl 4 ??
Hopefully be fine! I don't think these are too fussy really, just happy to have oil in them.
Do you have a video of all the vac pipes please mine are I a muddle and there is 1 to the injector side I don't know where it is supposed to go/feed😢
I don't have a video but if you're standing in front of the engine, from bulkhead, towards you, on top of the cam cover, it should go, green dash, white dash, no dashes on the vac lines
How much fluid did you use in total for all 4 oil changes?
In the video description
Is it the same oil for diff , transfer box and gearbox ?
Fluid types in the video description
Fluid Type:
Front Diff - SAE 80W GL5
Gearbox - 75W-90 GL-4
Transfer Box - 75W-90 GL-4
Rear Diff - SAE 80W GL5
Whay type gear oil lube to use.80-90
Oil spec is in video description
Ok tq sir
Fluid Type:
Front Diff - SAE 80W GL5
Gearbox - 75W-90 GL-4
Transfer Box - 75W-90 GL-4
Rear Diff - SAE 80W GL5