Make a turning saw from scrap wood and random hardware.
Vložit
- čas přidán 13. 10. 2020
- Cut smooth curves with your own traditional turning saw. Make every part from scratch.
More video and exclusive content: / rexkrueger
Get the plans!: www.rexkrueger.com/store/diy-...
Get the bundle!: www.rexkrueger.com/store/jour...
See the original turning saw collaboration: • Making a turning saw w...
Get the blades for your saw (non-affiliate): toolsforworkingwood.com/store...
No hacksaw? I recommend this one (affiliate): amzn.to/3dCouLn
Good blades (affiliate): amzn.to/3nOirb5
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
Sign up for Fabrication First, my FREE newsletter: eepurl.com/gRhEVT
Wood Work for Humans Tool List (affiliate):
Cutting
Gyokucho Ryoba Saw: amzn.to/2Z5Wmda
Dewalt Panel Saw: amzn.to/2HJqGmO
Suizan Dozuki Handsaw: amzn.to/3abRyXB
(Winner of the affordable dovetail-saw shootout.)
Spear and Jackson Tenon Saw: amzn.to/2zykhs6
(Needs tune-up to work well.)
Crown Tenon Saw: amzn.to/3l89Dut
(Works out of the box)
Carving Knife: amzn.to/2DkbsnM
Narex True Imperial Chisels: amzn.to/2EX4xls
(My favorite affordable new chisels.)
Blue-Handled Marples Chisels: amzn.to/2tVJARY
(I use these to make the DIY specialty planes, but I also like them for general work.)
Sharpening
Honing Guide: amzn.to/2TaJEZM
Norton Coarse/Fine Oil Stone: amzn.to/36seh2m
Natural Arkansas Fine Oil Stone: amzn.to/3irDQmq
Green buffing compound: amzn.to/2XuUBE2
Marking and Measuring
Stockman Knife: amzn.to/2Pp4bWP
(For marking and the built-in awl).
Speed Square: amzn.to/3gSi6jK
Stanley Marking Knife: amzn.to/2Ewrxo3
(Excellent, inexpensive marking knife.)
Blue Kreg measuring jig: amzn.to/2QTnKYd
Round-head Protractor: amzn.to/37fJ6oz
Drilling
Forstener Bits: amzn.to/3jpBgPl
Spade Bits: amzn.to/2U5kvML
Work-Holding
Orange F Clamps: amzn.to/2u3tp4X
Screw Clamp: amzn.to/3gCa5i8
Get my woodturning book: www.rexkrueger.com/book
Follow me on Instagram: @rexkrueger - Jak na to + styl
The first half of the czcams.com/users/postUgkx3ICSK6nSknaL_45CU2NmFSoXjarGMDiJ book is everything about wood: types, tools, finishes, setting up shop etc. The second half is all about doing projects for inside and outside of the home. The color pictures are helpful. After reading a dozen of these types of books, this is probably the best overall (layout, color photos, plans). Only detraction is that many of the projects use a table saw/router/planer, which are usually expensive and take up space, so the plans are less friendly to newcomers and the budget conscious. But I know I can use a drill, circular saw or a jigsaw to make the projects.
Yeah, right. Read this first though - prettyhandygirl.com/do-not-buy-teds-16000-woodworking-plans-without-reading-reviews/
Thank You for the St Judes fund raiser they saved my nephews life. Love watching your videos
Rex coming through again!
Rex, I've wanted to do woodworking for over a decade. Your $30 workbench gave me the confidence to just... start. I probably spent a half hour finding 11 2x4 straight enough 😂. I glued them all together and picked up that $37 plane from Ace hardware. I tuned it and then flattened my bench and I can't tell you good it felt. I've since spent many enjoyable hours sitting on this bench and planing old, thrown out wood into usable stock. My kids are in the shop learning with me and I am having the time of my life. So thank you thank you THANK you for your WWFH series
I should add, I've since made the wooden hammer and Japanese sawhorses. The biggest problem I run into is my cuts wandering. Practice practice!
Man, that is GREAT to hear! I'm really glad for you.
That's awesome!
That's awesome that you've not only gotten started, but that your kids have joined you along the journey. As far as cutting straight, yup, practice, but also check out videos from othe channels too. Wood by Wright, Paul Sellers, and many others have videos on sawing techniques, stance, and how to correct cuts; among other tips. Many channels have tips. It could even be that your saw needs some tuning, search either of the above channels or Rex's for tuning methods. An out of tune saw is really hard to cut straight with. If the tooth set is off on one side it will pull the saw off line. If you are hitting your side as you are stroking the saw it can push the saw off. I hope something I've said hear helps you.
Me too! Made the bench, Japanese sawhorses, spokeshave, and working on the turning saw now.
Here in Europe it's 10pm and man, you're making it really hard to not run into the workshop now to make stuff
Don't fight it. We'll sleep when we're dead.
Looking forward to that lathe
czcams.com/video/IShxXtAev9U/video.html this video may not be Rex doing it, but it does show how you can make a wood lathe! It looks like a fun project too, it seems so easy
With those handles you could always chuck that pin into a hand drill and use sandpaper to get a nice smooth rounded handle
Who in heck would give a woodworking tutorial from Rex a 'thumbs down'? Oh, maybe those people who are so inept and clumsy they can't pick their nose without poking themselves in the eye?..ya I forgot about those people :\
You really fooled me for a second at "we're just going to buy these pins for only 18 bucks" 😃.
I really try to keep everyone guessing!
Honestly.... I'll buy some once I can find them here in Germany, probably Dictum has them. Its hard enough to find the blades here, turning saws are so uncommon in continental Europe. And there's no roadside scrap to scavenge hardwood from, either.... And I need to spend less time on a single project or I'll end up getting nothing done in the workshop at all.
@@wernerviehhauser94 Feine Werkzeuge in Berlin has them in stock, the blades as well. Dictum doesn't if I recall correctly.
@@schm4704 Neat :-) Thanks. Then I'll order the kit along with the set of short japanese saws I intended to buy.
Same! Then I went to Lee Valley to check the price, and it was $81 CAD, and I was like "Hell naw, I'm making my own pins and handles."
I'm a young woodworker, I have been doing it for almost a year. I'm in high school so I don't have much time to work on projects, but your videos give me a glimpse at the fun I'm missing out on :). Thank you for making such good videos, they are really entertaining and informative. Keep going strong and keep making amazing videos like this.
That is awesome!
My favorite youtube wood worker. And I watch a lot. You are a service to humanity.
You can also use a forstner bit to make the bridle joint, just drill the hole at the bottom of the joint and then saw each side to the hole and clean it up with a chisel...
Thanks so much for all the stuff you're doing. It is really helping me to start to feel purpose in a forced early retirement. Im off to what we call The Mens Shed tomorrow in my town. Its a place for men to gather and build things for the community as well as talk. Then on Saturday morning im of to our woodworking group in our big town nearby. Not only to visit but to find a mentor for tool building and sharpening.
This needs to be in the woodwork for humans playlist
5:54 You know, it looks like you could use a turning saw to make the handles for that turning saw
It's true, but you don't NEED one.
Great show old chap, great show! Another project hits the list!
Glad you enjoyed it
Great video. I went to the Gramercy site and more interesting stuff. It took me about 30 minutes to remind myself I am a woodturner, get back on task!
Hey, Mike. I always love seeing guys from other channels I watch commenting on on other people's channels. So, when are you going to show us your version of this turning saw for your turning channel? I can only imagine the handles you'll come up with on your lathe. Just imagine the inside-out ornaments one could make with a good turning saw to cut out little ornaments to put inside the larger ornament once it is flipped inside out. Could be a handy saw for trimming up chess pieces too, knights, rooks, king's crowns, etc...
@@thomasarussellsr May be a while but something to think about.
I’ve been wanting to make one of these, so this will be helpful, thanks!
RIP Dewalt Saw 😭. It was there at the beginning of this series and made woodworking possible for so many of us
I don't think he will abandon it. This new tool is just like the others: it exists to do things the old ones couldn't. It's quite nice to step up a notch on our woodworking skills. Here where I live we don't have good tenon saws for sale, for example. We don't have acess to even cheap brands, let say veritas or narex, so we need to make our own. This kind of vídeos are awesome for guys like me who can't buy anything good cuz the country he lives is bad and stuff is:
A- extremely expensive. For me a veritas saw costs the equivalent to 3000 dollars, even the cheap ones. Import taxes, federal taxes and state taxes + govt bureaucracy. ;) i don't really know taxes names in english (it's my second language)
2- When you find cheap ones (it's already quite hard to find) they are AWFUL! As bad as the worst chinese stuff. So yeah, I just made my own tenon saw and its working smoothly, it gave me skills that I would never had, only got cuz I made it. So my suggestion is to you try and make those tools, it's not that hard and we can always do it again if we commit some major mistake. Tools are really cheap to make wood and metal wise since almost always you can repurpose the "lost" material.
@@user-iv1qz1tx7u completely agree. I just got a stanley backsaw which costed me the equivalent of 39 dollars and after I upgraded like in his video, it works pretty well.
I was actually referring to him getting rid of the dewalt saw and replacing it with the new Bahco handsaw he's using in this video haha
I cannot tell you how much I enjoy your uploads and the sense of adventure you present.......want to make something you need? Give it a shot. You learn as you go and your explanations are great for the common man. Keep up the good work!
Your an inspiration, I’m going to make one out of a broken antique dinning chair.
Right on!
Rex Krueger I built it. I’m a novice woodworker and it was a tricky project for me. So happy with the result. Oh and I went through with my plan to recycle the legs from the chair for the wood. I have an invisible wall blocking me from buying wood. I force myself to source it for free and only make what my limited resources allow.
@@lawntofoodforest That's pretty cool. Any video on your build?
Edit: Never mind, I went and looked and no content on your channel. But think about keeping an eye out for people tossing old furniture out in their trash pick-up days. Or folks trimming trees. If you only have hand tools, ripping lumber from tree branches can be a lot of work, but it can be done with practice and determination.
Thomas Russell I’m not a content creator yet as you saw. My woodworking is also in its infancy but I’m happy with my turning saw. It’s pretty much the same design as Rex’s but I made it from eye. I find timber, I rummage through skips at the back of furniture makers and I pull old fence posts washed down creeks. I haven’t paid for timber yet, I wonder how long I can keep that going.
I must say I agree ... to make a tool ourselves is a feeling hard to beat !
Your resourcefulness is incredibly commendable. I used your tuning guide to get my $30 Amazon hand plane to razor sharp. Thank you!
Awesome, thank you!
Great tutorial, Rex! You also almost had me at buying the $18 kit :D
Keep up the good work! Looking forward to the next video :)
Awesome! Thank you!
Me too. I nearly switched channels
I don't know how you can finish a whole project like this in one day, Rex. I'm pretty new to woodworking and sometimes I will spend 3 or so hours just planing a piece of wood! I'm so slow!
Keep your focus to getting it right first. Speed comes with practice. You CAN do this! l believe in you. ;o)
It took me 2 days, but filming slows me down a lot.
@@gnarthdarkanen7464 thanks!
@@Russ0107 Always welcome! Keep the faith, brother. ;o)
You could use an electric drill in a vice as a simple lathe. You'd need to make up some kind of tool rest.
Or, turn a drill press on its side and figure out a tool rest and tail-stock. All depends on what you want to turn and how you want to hold it.
Man, I wish you lived next door. I'd buy the beer...or soda..or whatever.
Beer!
Alcohol is not the answer:
um-kay?
(MR. Garrison, Southpark)
Hahaha!
Kinda like "drugs are not the answer", I've always wanted to scream at someone, "doesn't that depend on the question?".
The more I watch you Rex, the more I like you and your videos. Your like coffee lol
After the bench and the hammer this will be one of my next projects! Thx for the inspiration from Germany!
Why am I so attracted to this project? Perhaps because both my Grandfathers were toolmakers for a living? Who knows. Now I have to find the UK equivalent for that blade!
Great video Rex, that bow saw is my next project for sure! Just an FYI for those of you who live in Canada and don't want to spend 42USD for shipping directly from Gramercy Tools : Lee Valley sell Gramercy's bow blades for around 14CAD, which translates around the exact same price. Gotta keep that WWFH tool price as low as possible! Cheers!
I am binge watching your channel since two days, even if I am not able to put a nail in a wall. I'd like to be so skillful, thanks for all these videos. And I don't know why but I really like your intro music. Thank you Rex.
Awesome video. I am excited to make a turning saw :)
My favorite part was the spring pole lathe announcement. Spring pole lathes for humans?
For sure! I just need to build it.
@@RexKrueger can't wait!!
@@RexKrueger That will be an incredible video to watch.
The King what a joy to see you !
Great tool, great plans. Thanks Rex :)
Tools are most of what I make in my shop. What do I do with them? Make more tools.
I am going to do this. Again you are the man.
As a newbie, I can understand you. You make so much sense to woodworking.
👨🦳👶 (Old Gerber Baby)
I have tried to get on patrons and there isn't a link. Help!
Rex, I love your channel. I finally found patron. I signed up for $7.00 , but when it showed me the amount was wrong, $5.00.
Please fix for me. Thanks uh (million) not dollars lol.
Nice work Rex
Love your tool making videos. Gonna start making my own tools soon
Awesome project, Rex. Thank you! :)
Turning or small bow saw are easy and fun to make. I've made five; none are the same. Making the hardware is actually easy to make as well.
I am such a big fan
That's a very pretty tool.
You optimism is great
I told myself I wasn't starting any more personal projects until those in progress were done. I guess I'm starting this now
I think this is a very, VERY cool project!
Rex, your channel is fantastic!
I've been wanting to build one of these for a while. Thank you for posting!
Thanks Rex!
Good job very beautiful tool.
It's been over a decade since I was in shop class, and I've finally found out the type of saw I made in class! This was it! But less fancy. It was such an enjoyable project and I wish we did more wood work then. But I guess I can start now
It’s a good idea, if you have an evening to spare, to take a full ball of good cotton or hemp string or twine and a block of beeswax, light a candle, and coat the full ball of string with a healthy layer of wax, not rerolling it when the rough coating is done, then take a rag and pinch the string between two fingers inside the rag and pull it steadily but briskly through the pinch point to remove excess wax. Now make a ball of it again and you have waxed string for possibly years if you seldom use string. Waxed string like this is stronger than its unwaxed counterpart, frays less readily at the end, holds up to water better, and generally is superior for most applications.
If you have just a little coin to your name, $15 (US) will get a POUND of 90# nylon "Sinew"... There's not much more durable or stronger. The only downside is that you have to melt the ends so the knots will hold... BUT I've repaired saddles, horse collars, bridles, and lots of other tack and harness, and even re-upholstered motorcycle seats with it.
It comes off the spool "flat"... SO with a little careful effort, you can split the stuff, using a finger or thumbnail to separate fibers and then pull it apart for two or three or even four identical length strands out of a single "cut".
A little moisture on your forefinger and thumb, and you can just "roll" the stuff into good round thread. It's already waxed (at least every bit I've ever gotten was)... AND lasts for damn nearly ever. ;o)
Brother, you're a legend
Very Cool Turning Saw , Rex !!!!!!!!!!!!!!!!!
Crackin video Rex!
Thank you
That is a thing of beauty
Oh how I love this channel. The density of truly useful information you provide in your videos is something I've rarely come across, Rex.
Rex,
Great tool, pretty easy to make. I added a v-groove on the top of the stretcher and covered it with a piece of scrap wood, now I have a place to store extra blades.
Rex - this year has been tough for everyone, I’ve struggled to keep on the bright side. Your vids and attitude have really helped me and inspired me to get in the shed and give a few projects a go. Next stop is the marking gauge. Thanks for your content!
Definitely excited about the spring pole lathe, I am currently working on a different style of lathe but can definitely appreciate the traditional method.
Love your channel
Now that's just cool.
What you needed was a coping saw for cutting those curved sections.
I was having trouble getting something to hold the blade to the 1/4” rod in the diagonal slot- found that 18 gauge brad nails work well enough
Turning saw master . . . Grandpa Amu !
Just made one of these, mostly following your design, I did the mortise and tenons instead of the lap, but I absolutely love it. Thanks so much Rex! I love your channel and I really appreciate your approach to things. I can't afford to do the patreon stuff, but I'm gonna have to buy some plans to show some support. Keep up the great work brother!
You are one of the guys on youtube who got.me into woodworking with hand tools. I used a router a lot but now I do a lot of those things with a handplane. Keep them vids coming Rex. Big thumbs up
Douglas fir is the standard for framing material in most of the U.S.
Perfectly machined brass parts. So we got to buy them right $18 right? no we're going to make it out of some junk. You my sir are priceless.
Pretty fantastic work, Rex! The saw looks beautiful! 😃
Really well done!!!
Stay safe there with your family! 🖖😊
Farriers rasps are good coarse rasps and pretty cheap. I got one a couple of years ago for about $5.00 from a hardware store
Maybe add some kind of thread locker to the lock nut? Like a drop of epoxy or superglue or something like Loctite and competitors?
Im so glad i watched this video, i found a nice old turning saw at the antique mall and i was definitely going the band saw blade route 😅
Looking forward to the spring pole lathe
Awesome Job!!!! That's Cool!!! Thank You!!!! 👍😎😃
You are amazing. I get inspired by your videos. When I have free time............
Thanks
Nice!
I love woodworking and your videos make me happy, ive built you low roman workbench for handtool woodworking, ive also make your turning saw, your videos are really informational
I just tried out a Stanley Bailey Plane from my father. Using your video I gave it a clean and got excellent shavings, even with just a cursory sharpen. Now I need to fix the blade up, it is ground wonky.
That is awesome!
Rex, you are a fantastic maker and content creator!
One of the struggles I had a few years ago when I started getting into woodworking was finding projects that were challenging enough to teach me new skills and give me a practiced hand, but that also used a relatively small set of tools that I could justify spending money on in the event that I turned out not to enjoy this hobby as much as I thought I would.
I have never had that problem with your with the Woodworking for Humans videos, since each one builds on concepts and tools from previous videos. In this one you use a spoke shave you showed us how to make, a cheap saw you showed us how to improve, a work bench you built and upgraded. No matter where a person is in their skill set, you videos provide an easy curated list that anyone can use to boot strap there way to the next thing.
Cool video
Dude I, really like the vids.
I'm germen and my frame saw is olso with a brydal. Ist works great.
Bits with spurs at the outside diameter (spade,forstner,Brad point) are intended for the operator to set the bit in a indent left from center punch or pilot hole and then run in reverse to allow the spurs to cut the fibers at the hole entry point and then go forward and let her rip.
Great video Rex. The Gramercy set is $80 CAD here. So I might go the completely home-made route as well.
Nice saw and good third life for the old growth Doug for. Her in LA the best tight grain come for old 2x3 from house built before 1940's
And the to-do list gets bigger again. Haha. Great video brother.
I feel like half of hand tool woodworking is making more tools for hand tool woodworking. I can’t think of many other crafts where you can do that. I’ll never be able to knit new knitting needles, and I can forget about baking a new mixing bowl.
I was going to ask about a pole lathe but since you plan on doing it already what about a shave horse? probably could make something that fits into the square mortice in the roman bench.
Try a sawzall demo blade for a rasp in a through and through mortise
Build it yourself, and then take yourself out for STEAK! You have earned it.
Rex, I truly enjoy all of your videos. they are both educational and entertaining; lots of useable information for the layman wood worker.. Myself, my hobby is making archery selfbows. I typically work with raw staves and use a hatchet or machete to rough out the bow. My problem - I need a heavy duty chopping block. Thinking of using 4 x 4's to make a man made stump and using dowels and butterflies to hold the pieces together. Would enjoy seeing how you make and use butterfly inlays. JH
Interesting, I made a turning saw similar to yours. Main difference is I used a bolt with a smooth shank on it and cut the head off and then cut the slit for the blade in the smooth end. I also made a coping saw using the same method. Spring Pole lathe is a great idea, but have you considered the DaVinci type lathe. He designed one with a flywheel that turns the stock continuously the same direction instead of back and forth like a spring pole lathe. There are several renditions of it to look at online. You can make up to 1,000 RPM with one. I love your Chanel. I have been wood working a long time, and am still learning. I have learned things from you and wish to say thanks. My motto is "where is the fun in buying when you can make it." I have never heard you say it, but I see that you believe it. Thanks again.
Man it would have been so useful to have a saw that can cut curve for those arms if only there was something to do that 😉😆😆😆
You could attach the handle by the pin to a power drill to sand it.
Excellent work, as always. I made a European bow saw Paul Sellers style and they are really fun to make. I will surely make a turning saw, If I can find the right blades here in Italy
The Gramercy blades look like they're available in Germany. www.feinewerkzeuge.de/gramercy-tools-bow-saw.html
YES THE DREANS ARE TRUE! IT WILL HAPPEN!
yeah I'd like to see your version of a lathe also . I made one out of a washing machine motor a grinder pulley ,old drill and wood. then the other end of the pulley I put a belt grinder. all I can say is it works okay.
Those handles are gorgeous, like heirloom tomottoes.
I wonder how they affixed handles before epoxy.
I never see ferrules and pins on pics of antique ones nor the flange outside
the handel like Juri's.
I empathize the lack of lathe, I tried to make a London pattern one since its mostly
flats and the curved part took longer than the saw frame.
Good job.