How To Adjust CAMBER On An FRS/BRZ/86
Vložit
- čas přidán 12. 09. 2018
- How to adjust rear lower control arms and front camber plates on your frs/brz/86! I was having trouble trying to find a video on how to properly adjust these parts, so I decided to make this one for you guys! Hope you guys enjoy and hopefully it helps you out. :)
Hit that SUBSCRIBE button to stay up-to-date with my content!
Follow me on Instagram
/ chrisborqes
Join Throtl VIP to save $ on car parts!
Use promo code: ‘CRISPY’
www.throtl.com/i/CRISPY
2016 Scion FRS Mods (Current)
-Greddy Rocket Bunny V1 fenders
-Solid gray paint job
-BC BR extreme low coilovers
-PBM lower control arms
-Megan toe arms
-PBM subframe/differential risers
-Work Emitz
18x10/18x11
-Federal ss595 tires
Front: 215/40/18
Rear: 255/35/18
-custom muffler delete exhaust
-5% tint all around
-Valenti smoked taillights
Music
❚ Kronicle
• / the-chemist-10
"spring in my step"
If you're reading this, I love you.
This is the best video i found on camber. Thanks bro i like how you showed front and rear
Thank you for all them camera angles 👁👄👁 Helps a lot! 😤🤙🏽
Great video, perfect angles and described what to do! Thanks bro
thank you so much dude! I bought pbm as well but couldn’t find any video on youtube how to adjust them properly. More freedom for me now that I know how to adjust them 👌thanks again really appreciate it bro
solitario_dc2 yessss so glad it helped you out bro ! i was in the same boat not too long ago i didn’t understand how pbm lcas work... but once i found out i wanted to help anyone else that had the same problem .
Finally a great tutorial thanks again for the video dude much love 🤘🏽
thank you thank you! glad you enjoy.
Dude, thank you so much for this vid! Such great info, keep up the great work!
No problem bro! Just trying to help out as much people as I can. Hope it helps!
Thankyou for this video bro it really explained and put it more direct and easy to understand.
Glad it helped!
Great video dude keep it up
Your vids are a godsend!
everyone so scared to show theyre camber setups thx for vid!!
Why did you use “they’re”? Do you not know the contraction?
Been looking for this as well! Thank you.
Man, you’re everywhere 😂
@@KeepingUpWLeland You know me
What camber plate did you purchase and where did you get it from?
if i just have lowering springs, can i add negative camber to my wheels if everything else is stock. As i see in this video i see that ill need camber plates, but is there anything else i need to add camber?
Is there a reason you switch from PBM toe arms to Megan racing? Do you notice a difference?
and the left handed threads are for the vibration so that the nuts actually spin and makes them selves tighter instead of becoming loose
This is such a great video! Keep it up 🤘🏼
I want to take camber out, like get back to 0 camber how would I do that?
So after you set your camber to your own preference, then you take it to get aligned? Does that go hand-in-hand with the toe-arms?
Angel Moreno yes
So I recently got the camber plates as well, maxed them out right off the box, but noticed that when at full lock, my stabilizer links would rub up against the wall, did you come across this problem as well?
Yes I tried hammering it for more clearance but eventually just removed those sway bar links and ran it without.
Nicely done! One question though, when you take it to the alignment shop do you tell them not to touch the camber? Even though you put -7 degrees its probably not exact and probably has different values on each sides.. do you try to match them up so you have exactly the same camber, or you just leave it
I make a guess on how it looks at home then I tell the alignment shop to put it at the exact degree when I get it aligned!
Awesome
Does anyone now if Megan racing lowered control arm gives me positive camber on the rear?
For the rears is it just the Pbm control arms and toe arms?
yes.
The heim joint was not installed properly. I’m guessing it was done that way to be able to access jam nuts and adjuster. Proper way is to screw adjuster all the in, heim all the way in, hold heim(so it can’t turn), then make your adjustment. This allows full range of adjustment (arm can be made as long or short as possible). Subframe may have to be cut some to access jam nuts. I do alignments on plenty of low cars and drift cars. Very common mistake when people install heims and adjusters incorrectly. Important to do properly prior to install. Saves time and money. 👍🏽
how do those pbm's feel? im thinking about getting those on my frs as well to even out the 1inch gap on the rear even though my coils are maxed, will these bad boys do the trick?
they're awesome. these can drop your car super low. believe it or not with my track stance setup, I had to raise my coilers to almost the max height they can go because the arms lower the car so much. they will definitely fix your problem. great investment for going low!
Chris Borges that’s insane! Thanks man, love your videos!
appreciate you so much thank you!
So im trying to adjust my camber positively im trying to get the rear wheels closer to being straight up and down. I don't need a toe arm for that right?
you don't need to, you should be fine with the stock toe arms.
what do i need for the front to have negative camber? only camber plates and bolts? how about the alignment?
Vincent Que yes it’s in the video plates and bolts. and you will need to take your car to an alignment shop after to get it properly aligned.
Hey when you installed the Bc were you able to adjust front oem tie rods for bump steer? I have really bad bump steer with Bc extreme low maxed negative camber and I wondering if the oem tie rod can be adjusted
Team No Sponsors I believe the oem tie rods can be adjusted. As far as the rubbing with the end links on the frame from negative camber, I just removed the whole end link itself to avoid that LOL and ran none.
Chris Borges yo do you get any bumper steer when slamming the car? I get a lot, have you heard of bump steer? Because I have the extreme low coils and I can’t find any help on this
Team No Sponsors I may have misinterpreted your first comment when I replied. What is bump steer? I haven’t heard of it.
Chris Borges Bump Steer is when your wheels steer themselves without input from the steering wheel. The undesirable steering is caused by bumps in the road. It happens when cars are lowered. I’m asking cause I’m having this issue. Do you have any custom front arms other then the end-links that came with coils?
Team No Sponsors Ahh i see yeah bump steer sometimes happens with me. I don’t have any custom arms.
Is it the same concept for most control arms because I have the blox ones?
If they look the same yes
Know its a old video but just installed these on 2020 wrx and the hole where the bottom of the coil mounts to the lca the bolt isnt long enough or did I do something wrong. The bottom mount for the coil is in the top hole not the, The bottom was to much of a drop. The nut will go on the bolt but not enough of the bolt to thread the nut all the way on, Didnt know if the bolts threads needed to be facing the front of the car if that changes anything or the back. (Have them facing the front right now.) Just trying to gather info before its on the ground and the coil comes loose because something wasnt tightend.
Thanks in advance if you get around to responding to this, or if you don't have a clue that's cool too just gathering info.
Try switching that bolt with the bolt that is used closest to the outside of the car for the axle area. I believe that one is longer.
@@chris_borges Thanks man appreciate it.
What top hats are those?
Outofsystem
Best part at 06:30. They talking about Fortnite 👌🏼 haha just noticed this. Thanks for this tutorial Chris!
Aye I literally got my rear camber kits the other day this video was a freaking great reference!!!! Drop them grams boys/girls @Tyllerjohnsonn
thank you, glad it helped!
You’re nice
what is that fitment