IT'S SO MUCH FASTER!!! Honda Monkey Intake Install, Tune, and First Ride after Performance Upgrades
Vložit
- čas přidán 4. 07. 2024
- Ridge Roamer finishes the performance upgrades on the Honda Monkey, then takes a test ride to see how it rides. If you missed the installation of the TB Parts exhaust, make sure to check it out in a previous video. This video covers installation of the MNNTHBX Intake, and CJR Performance ECU tune.
Timestamps
0:00 Intro
0:13 Installation
2:29 ECU Tune
3:11 Seat Bolts
3:44 Startup
4:22 Ride
7:28 Review
7:57 Off road/Gravel Ride - Auta a dopravní prostředky
Looks like a well thought out Intake. I had an original yellow MT50 when I was a kid around 1970
Great video, I love the area you get to ride daily. Looks beautiful!
3:50 I do genuinely love the sound of a motor going 200 rpm for some reason
Stock exhaust sounds better, way better in person I have a Monkey.
@@joecamel6835 in your opinion. I found it hideous and couldn’t ride it till I changed it out.
Mee too @@nspacetime
Great channel Ridge! I've always wanted the monkey ever since it came out. I hope to add one to my garage, they look like so much fun!
Thank you! They are a ton of fun!
The little Monkey is running great! =)
it sounds amazing, I love it
This is so cool, great job! Are you able to fit the airbox cover back on after the mod? I have some stickers on mine that I would hate to give up, otherwise this looks like a fun project!
Good morning to you!
I am Cross Cub grandpa from Japan and sharing Cross Cub video.
Monkey is so nice motorcycle !!
So great job !
Have a nice day friend !
@Muura san , sorry, I do not have Monkey !!
Can’t wait to get mine 2023
got one like this but just original, really fun little bikes for Sundays and sunny weather day trips :)
What a beautiful countryside! 😲
Great roads to ride!
looks like our roads in se ky. My 2022 monkey that was sposed to be here late sept is now due in mid dec, can't wait. If my bus is campable by then, i may take off to az/nm/nv just so i can ride the bike all winter lol good vid
Thank you. I'm in East TN. You're going to love the Monkey. You can't help but have fun!
@@RidgeRoamer yea I been playin with mini bikes again the last couple years and can't get enough of em. I go down to knoxville once in a while to drag race them with friends. I also want to hit some events at windrock and a few other places in e tn, as well as out west and the pnw.
That looks so much better as does the exhaust.
I’ve got a Triumph SS that is tricked out. But I keep checking these out to have an easy bike to haul camping and mess around on. Maybe I can convince my wife she needs one. Can’t have too many bikes.
Hey got a question what brand intake system did you install were did you get it and how much cause I just bought one and saw your video I'm interested in getting one
Thank you for your video! Very helpful on an installation!
sounds good
Thatnks for the video. Just curious if there was any kind of special instructions for reinstall after the ecu flash? Or was it just plug and play? Thanks in advanced!
Thank you! It was just plug and play for reinstallation of the ECU. Super easy!
That is one perfectly tuned little 125
Thanks for the video. Just bought a ‘21 Monkey non ABS. Few questions… what is that speaker box and is it hard wired to battery? Where did you order your tune and air intake upgrade? Would a tune be needed if I just upgraded the stupid looking factory air box to a nicer cleaner air filter look?
It's a Kuryakyn sound bar. I made a whole video on it too. Ordered intake through MNNTHBX. Tune done by CJR. Yes, just an intake would probably still require a tune.
Nice!
Could you do this on the trail 125? That would be pretty cool
I wonder if similar mods could be done to the CT 125
Does exhaust, intake and tune effect MPG? Thanks
Love the mods
Thumbs up great video. I can’t help but think that now you’re faster, your gonna need better braking and suspension, maybe a full fairing, race leathers and boots. I’m gonna resist modifying my Monkey, (cause it looks like a rabbit hole!) and sometimes, slow is fun. That’s why I bought it.
I’ll get the CBR out when I need some fast riding.
Thank you! The brakes are great since the bike is so light. I have upgraded the rear suspension already (first thing I did). Front could use work too, but it's passable. I have actually mocked up a fairing already, but really more as a joke. I have leathers, and have already dragged knee on the Monkey. I may post a little video I have, but really need to go get some better shots doing that. You are correct, slow is fun. But making that slow a little bit faster turns out to be even more fun!
I really enjoyed your video. I have the same bike. Could you be so kindly in letting me know the type of exhaust system you put on this bike. I like to do a little upgrading to my bike as well, and those two things seem to work out fine for you. Cheers thank you Marshall
Thank you. The exhaust is by TB Parts. Here is my video on it: czcams.com/video/Sf1sLbi_jMI/video.html
Have you been tempted by the idea of a 150 conversion?
You don’t want that big plastic lunch box air cleaner it blocks air cooling for the head, I got this intake on mine 👍I got a black widow exuast system that looks beautiful and performs just like yoshi for half the price, Al’s flashed tune, 14 tooth front sprocket and man in the box billet break away shifter that replaces the 10 pounds of metal rods and levers from factory, billet seat bolt plugs, a nice little luggage rack you gotta have something to hold stuff, put a clock on the handle bar because I would loose track having fun, 300 lb rear shocks the stock suspension is junk I still need to upgrade front forks and it could badly use a 5th gear maybe some one will make a kit soon? I love the bike my Harley just sits now it’s so easy to jump on the monk and burn up back roads all day on a half tank👍👍
Inpurchase the air intake and the mufler you have but do you have the serial number for the ecu you purchase soni can get it , the video is great tnks fornthe info
The ECU was not replaced. It was sent to CJR Performance and reprogrammed based on the exhaust and intake.
I noticed a bit of trouble at idle when first started. Did the control module work it out.? Tune it correctlw.
Yes and yes. The tune is awesome and it runs great with the mods. But my Monkey has always had cold idle issues. Not bad, but slight hesitation or occasional stall when first started. Was like that when 100% stock, and has been like that every since.
I'd a used a rattle can spay bed liner on the intake hose
Did you do a top speed run yet? Curious to see how much it gained
There are no gains. Just sounds fast
If you are running errands...how do you prevent theft while in a store?
I took the lunch box off immediately! I got this intake now, and don’t waste your money on yoshi exuast!! I got Black Widow it’s beautiful and performs great, take off thy12 pounds of foot shifter and linkage and get the 10oz billet break away shifter, have the module flashed for a stage one tune.
Nice! Bet that thing is a high preformance canyon carver now!
It is indeed. Haven't had an issues yet, but will likely upgrade to a stickier tire soon
What exhaust do you have? Also, to do both the exhaust and intake...do you have to do a re-tune on it? Thanks!
Yes, tune is required.
Here is a video on my exhaust: czcams.com/video/Sf1sLbi_jMI/video.htmlsi=1wR2xU_eC_w8KuVH
Do you happen to know if there was a change in mpg after the mods? Cheers
My experience on engine mods overall is that resulting mpg is highly dependent on the operator. Since it now makes more power, if ridden conservatively, it should yield higher mpg since less input is required to give the same results. However, since it now makes more power, I always want to use that power whenever possible, so I am on the throttle more, yielding lower mpg. But no, I haven't officially tracked mpg on this bike.
Nice ....
🇺🇸
Bro , you need a lift table !
I can’t imagine crawling around on the ground working on such a tiny bike. I have 3 of these bikes (two 2021 models and a 2023). I lift mine up to eye level on a Harbor Freight lift table . I highly recommend one 👍🏼
Yeah, it's on the list of garage upgrades... someday
Nice Bike. I did the same mods except for the exhaust. I used the Vance and Hines slip on. Its a easy install, sound and performance are great but it doesn’t have that raised heat shield that the Yoshimura does. Leg burns! If I had to do it again I would buy the Yoshimura.
Just a follow up to my exhaust comment. I solved my leg burn issue with a 25.00 aftermarket heat shield for the portion of the pipe that gets my calf. Looks good. Also, if you get the Honda OEM rear peg assembly (got it overseas not sold in USA) you can use the Vance and Hines Grom Hooligan version of the exhaust which is run underneath.
Other reviews say its top speed is 64-65 mph (original specs). How much extra speed do you gain with this upgrade, thinking of having better perfomance on freeways.
Check out this video I did regarding top speed.
czcams.com/video/U_5ZXBoHjb4/video.html
Mann I want one of those
Hey , I’m buying one of these this Friday. True novice with engines, where can I get one of these intakes ? Thank you
I got mine at mnnthbx.com
Did you ever get it re-programmed so it would idle at the correct speed? Those upgrade mods are always a compromise. They never work exactly as advertised.
Idle speed is same as stock. Never idled quite high enough before any mods. I need to ask the tuner to bump it up a bit, but the low idle is only an issue for the first few seconds, so never seems worth it. As soon as it warms up a touch, all is well. It is same before and after mods...
Hmmmmm, my ‘21 Monkey is bone stock. Love your mods but I’m sticking with stock red Monkey it’s so classic
👌👌
If you want to make it look better you should paint that intake hose flat black. Since it's white and the bottom of the tank is white when you attempt to look at the straight line of the tank at the bottom your eye notices that kinda silly looking hose. I have learned that if you don't want to draw the eye's attention if you make something flat black it isn't even noticed.
So what was done an intake and a ecu chipping ? That’s it? Is the exhaust stock?
Exhaust video: czcams.com/video/Sf1sLbi_jMI/video.html
Interesting
Please cuál es la velocidad máxima?
So is it a bit like a smaller version of a scrambler style of bike ? Go on the road and off it too ? Good 4 those long forest road rides in summer late afternoon through the hills with that beautiful sunset in the west coming through the trees and that smell !! Ah that smell of summer evening and pine forest with a side of slight dust to enhance your sences
Indeed, great little bike for riding hard in the curves, cruising the back roads, or hitting some trails. So lightweight and easy to handle in any situation. Just plain fun!
no.. it's a bigger Honda z50 you can actually legally ride on the road
Where is this filmed at? Nice scenery.
East Tennessee. Thank you
I kinda want one for my 12 and 15 year old. And of course for me to run to the store.
did you need the rejet the carb with your mods????
It's fuel injected, so the tuner took care of it. Didn't need to change any parts in the fuel delivery system.
Can you tell me where you got the seat bolts? I just got my Monkey last night. Thank you
Ordered online from MNNTHBX.
@@RidgeRoamer great videos, thanks for the reply I'm looking for them now. Subscribed
How many miles do you get per tank now?
No idea. Lots. And lots of smiles.
I want one so bad!!! How do I purchase one? I can't seem to find any for sale. I'm from Los Angeles, CA.... Can I just get one of these at the Honda dealer?
That would be the best place to start. They probably won't have any in stock, but you should be able to reserve one. Otherwise you can try to find a used one. They are awesome!
Hi there,
Nice video!
Is the exhaust system good?
How many horses did the engine gain?
Best Regards
Thank you! I am very happy with the exhaust. I have a full video on it on my channel if you want to watch. I did not do dyno testing, so can't say what the actual horsepower gains were.
@@RidgeRoamer
You are welcome!;o)
I'll watch the exhaust video!
Where did you buy the air filter kit, the exhaust and seat bolts?
@@manuelpereira1384 I bought the exhaust direct from tbparts.com, and seat bolts and air filter kit from mnnthbx.com. For tuner, I worked direct with cjr.com
Put a windscreen on it!!! and you’ll be surprised, 3-5 MPH increase “by cutting wind”, my stock Grom can hit 70mph easy completely stock. 66 was top speed before adding the windscreen.
I'll have to give that a try. What size windscreen did you use?
Is it the 5 speed Grom?
@@ridehead8771 Yes. 2022
@@RidgeRoamer not sure about the size but it appears on eBay as: FRONT TINT SMOKE BLACK WINDSCREEN GUARD WINDSHIELD HONDA MSX GROM 125 2020-2021
@@gustavopolanco6925 is the blue color bike in the picture and do you have a video of yours
Were did you purchase sound par
Full video on soundbar here, with link in description: czcams.com/video/tTT9_J_x_zo/video.html
Hello, where can I find the key for the motorcycle seat, to close it with the motorcycle key? thanks
Those are aftermarket accessory bolts that allow you to use your key as a screwdriver instead of the standard stock bolts that require a ratchet. Purchased from mnnthbx.com
@@RidgeRoamer Thanks, I'll try to find out on the page
@@RidgeRoamer I can't find it, can you send the direct link
Do any of these modifications void the warranty?😬. Which mod gave you the most bang for your buck?🤔
Warranty probably depends on your dealership. Hard to say which mod has biggest result. Best to do as a package deal as the air in, air out, and modified tune all work hand in hand.
Tune would probably void it
high lift cam crank lighten and balanced back and front sprocket 3.1 ratio 28 mm carb gorilla tank top speed 90 + that if you can keep the front wheel down mine was a 1990 model
You didn't link bensound!!!! ;) Just kidding. Nice video
hows the fuel consumption sir?
Fuel consumption goes up when I twist the throttle. After lots of enjoyment I need to put more gas in. Sorry, just having fun... I haven't tracked fuel economy.
Were did you purchase sound bar
Here is the link to the sound bar. It sounds awesome! amzn.to/3b4nJtZ
Are those the original handle bars.. just want to make sure before getting sound bar
oil cooler as well
I am buying a Monkey this week. I’ve been reading many of the channels dedicated to the Honda Monkey. I’m 60 yrs old. I though about doing some performance mods i.e., yoshimura exhaust, chimera air intake …
But then I saw that you have to reprogram the computer or chips on the monkey to adjust for the modifications. Then one CZcamsr said the reprogramming wasn’t working and he had to go back to the original exhaust and air intake.
Question: should I leave it alone? Just as the manufacturer intended ?
JC
I'd say ride it stock for a while then decide. If it does everything you need/want it to do in stock form, then there is no reason to spend money on upgrades. If you want more (sound, speed, acceleration, etc), then do the appropriate modifications.
If its pgmfi u dont have to mod anything. Carb bikes u do. I have a honda 125cc with pgmfi and i made a ram air turbo and its plug n play, no tweaking needed
Do I have to have a certain amount of miles on this bike before i add the yosh pipe and the instake?
No
I have one of these with only like 75 miles on it and i already have the same set up ready to install but I have heard that i should have at least 600 miles on it before i put this stuff on it.
@@daddygee45 for break in yea but it’s not gonna destroy your bike they also say you should not rev it past a certain rpm for break it but it’s near impossible on these little bikes
Doubt it. Honda says their bikes come broken-in. “You buy, you go full throttle”.
Everyone needs a monkey 🐒.
I want custom exhaust for my bike
Looks way better without that box,more like oldschool now
So it's got more power but what's the MPG difference
I don't know and couldn't care less. It's all in how you ride it. I ride mine hard, so it probably drops all the way down to 80 or 90 mpg. Plenty of smiles per gallon for me!
@@RidgeRoamer Thanks for the great video and your reply. I genuinely care about my MPG it's one of the main reasons for buying my monkey. However I'd love to do the upgrades. Maybe I should get another and upgrade that.😄
I agree or at least a 250 four-stroke
How is the MPG after the upgrade?
Not a clue. In my mind MPG is for practical things. I would ride my Monkey if it got 200mpg, and I would ride my Monkey if it got 20mpg. So why bother calculating... It gets LOTS of smiles per gallon though!
@@RidgeRoamer can't wait to get mine. I have got allready mods in my mind .
What year monkey is it?
It is a 2019
what state is that? thx
Tennessee
@@RidgeRoamer Beautiful place.
Put the stock muffler back on! Nice bike
Air filter is in a bad spot, needs to be in back so water and dirt won't get sprayed from front tire,!!!
those intakes have a breathable water jacket that's suppose to go over the air filter so that doesn't happen
What about a bigger fuel injector?
It beats me, why everyone tuning these updates air intake and exhaust, but nobody changes the fuel injector. More airflow would requires more gas too...
Lots of Honda injectors to choose from.
I think the one used in Honda 150cc scooters would be pretty good thing to start adding the fuel delivery. Cheap part and just the same on the outside.
With just intake and exhaust changed, the stock injector seems to be keeping up with the upgraded ECU tune. If I get into motor work, I may look at that, but not sure it's needed at the moment. Though I also haven't plugged in to monitor AFR, fuel flow rates, compare to rated capability of injector, etc... It's more involved, and so far this is just a garage upgrade. Don't want to blindly make too many changes.
you don't need an upgraded injector, thats what the tune is for. it widens the pulse width so it shoots more fuel into the engine to maximize the freer flowin intake and exhaust. injector upgrades would only be needed for more serious engine work like a big bore kit.
For the price of the new ones, they should have 300cc two stroke motors
the price isn't much really...
the 40 yr old original monkeys/z50's are no less then $2000 - $3000
some fully restored even 4 to $5000
and a Honda grom is half the price
but it's half the build of the monkey
groms are all cheap plastic.. no chrome.
monkeys are 100% metal...and chrome
metal chrome fenders
metal tank
big comfy seat...
there's a reason they're more money
You miss the point of the Monkeybecause you are young.
@thegreatwhitenorth it only cost that much because of branding. They are made for like $300usd
Nothing like the sound of a 2 stroke
Agree 100%
300cc rebel is same price.
I was looking for the narration of your mod, not a cheesy Steven Spielberg soundtrack. Maybe the next CZcams on the list will be actual mod content and not a music video. Meanwhile left you a parting gift for your algorithm.
I don't like yellow but man this thing looks sweet!
Thank you!
They look amazing in yellow
The music to ‘the Benny Hill show’ would have been more apt.
How much what’s your parts list text to FTFMGARAGE thank you
in the minut 3:18
Even your roads are off-road😂
Why all these bikers want that terrible big motorbikes...this Honda is all you need!!!
I don’t understand why people buy a 125cc and try to make it go faster.
If you want to go faster, buy a bike with a bigger engine.
The whole point of a monkey is that it’s good cheap fun no matter what speed you’re doing.
If you try to mod it to go faster then it’ll do less mpg’s which is the whole point of this bike.
The point of a Monkey is the joy of riding a small retro style mini bike with 12" wheels on the street as a grown adult. It's almost comical, which is the fun in it for me. Modifying the bike to go faster amplifies the fun by making it even more comical as you accelerate through traffic and pass someone at 70mph, thus increasing the level of enjoyment. If I dropped the fuel economy from 110mpg to 95mpg, I haven't even noticed, as the smile on my face distracted me too much to care. And yes, if I really want to go faster, I hop on one of my other motorcycles with a bigger engine.
Sorry at 5k shouldn't need any mods.
Jmho
My navi, when I.mod her up.will still.cost less than a monkey with mods...
It's never about "needs" when customizing motorcycles...
A wee bit to noisy..Otherwise perfect moto cycle..
Go whine to your boyfriend.
@@xploration1437 lol
Why why why all you do is make the engine To make eat all the sand from the air... All powerfull engine destrier air fillter and why not To buy power commander 5 and tune it your self much better and no costs if needed To re program do it your self. You need the autotune To mesure afr (airfueoration) To between 13.2 To 13.7 power 14.7 is Eco. And btw is standardt program In monkey/grom. If no corrrection made the ecu starts To make own corrrections... Plug the own lambda of and make the autotune lambda primary. Then the mil light Will ligt up butt the program wont change. 🤘👍 Been there done that 15.6 hp 10 tousand kilometers behind 181 bbk self made program kitaco high out put camchaft. I Weight 92kg top speed real GPS 105km/h
Why make all that noise? Se me! Se me?stupid. I will do the uppersit. HAIR the BIRDS. 😉
too loud
another noisy neighbor.
Probably way louder than a Harley Quinn. Or a piped R6. LOL
Lol
I think that Quiet is better. I don't like sharing my noise with people. And in the woods especially. I like going through the woods
and surprising wildlife, not scaring them off before I can see anything. Motorcyclists seem to too often be rather selfish, as if other people enjoy their noise.
Random thought here: Why not just leave it alone & stop junking it up? It's a damn mini bike for Christ's sake
Junk it up? The aftermarket exhaust and intake cleaned it up, got rid of weight and visual bulk of the stock components. Plus it runs better and sounds better. Odd video to watch if you don't like upgrading bikes.
I can WITHOUT the GOOFY MUSIC!