Polishing Car Windows With Special Tool.
Vložit
- čas přidán 20. 04. 2024
- On the sidelines of the Formula 1™ weekend in Shanghai, Mercedes-AMG has unveiled the new top model in its GT series. The extremely powerful E PERFORMANCE hybrid drive consisting of a V8 engine and electric motor ensures lightning-fast response to inputs along with emphatic power delivery. Innovative motorsport technology, inspired by the Mercedes-AMG PETRONAS F1 Team, forms the basis of a unique motoring experience packed with performance and driving dynamics.
"From zero to 100 in 2.8 seconds - no AMG series model has ever sprinted that fast before. Given these values, it was clear that the world premiere of the new AMG GT63 S E PERFORMANCE had to take place on the sidelines of a Formula 1™ race. Our four-litre V8, combined with the performance hybrid system, makes the vehicle the top model in our GT family. The GT 63 S E PERFORMANCE combines enormous performance with a very dynamic driving experience and thus creates pure goosebumps. At the same time, the vehicle offers extensive equipment options and high-quality materials, making it one of the most exclusive performance-coupés on the market." Michael Schiebe, CEO of Mercedes-AMG GmbH and Head of Business Units Mercedes-Benz G-Class & Mercedes Maybach
In the new AMG GT63 S E PERFORMANCE, the 4.0-litre V8 biturbo engine and the AMG Electric Drive Unit together generate a system output of 600 kW (816 hp) and a maximum torque of up to 1,420 Nm. The rapid acceleration to 100 km/h in 2.8 seconds and the top speed of 320 km/h underline the powerful performance. Systems such as the AMG ACTIVE RIDE CONTROL suspension with semi-active roll stabilisation and active rear-axle steering ensure a wide spread between driving dynamics and everyday comfort.
E PERFORMANCE: Combustion engine at the front, electric motor at the rear
The drive train of the new AMG GT63 S E PERFORMANCE combines the AMG 4.0-litre V8 biturbo engine on the front axle with an electric drive unit on the rear axle. It integrates a 150 kW (204 hp), permanently excited synchronous electric motor with an electrically switched two-speed transmission and a mechanical rear axle limited-slip differential. The lightweight high-performance battery is also located above the rear axle. This compact design results in numerous advantages. The electric motor acts directly on the rear axle and can therefore convert its power more directly into propulsion. This provides an extra boost when starting off, accelerating or overtaking. As slip on the rear axle increases, the driving force of the electric motor is also transferred to the front wheels as required. The mechanical connection of the fully variable AMG Performance 4MATIC+ all-wheel drive makes this possible via the cardan shaft and drive shafts of the front wheels. The positioning on the rear axle improves the weight and axle load distribution in the vehicle and thus forms the basis for convincing handling.
Inspired by Formula 1™, developed in Affalterbach: the AMG High Performance battery
Batteries require a defined temperature for optimal power delivery. If they get too cold or too hot, they temporarily lose power or even have to be turned down to avoid damage if the temperature is too high. A uniform temperature control of the battery therefore has a decisive influence on its performance, service life and safety. Conventional cooling systems that only use air or cool the entire battery pack indirectly with water quickly reach their limits - especially as the requirements continue to increase due to ever more energy-dense cells.
The basis for the high performance of the AMG 400-volt battery is the innovative direct cooling: for the first time, the 560 cells are cooled individually. They are constantly surrounded by a high-tech coolant based on a non-flammable liquid. Compared to water, the coolant has a heat capacity that is two to three times higher and stores more thermal energy. For direct cooling, the AMG specialists had to develop new, millimetre-thin cooling shafts whose width corresponds to the height of the cylindrical cells.
The development of the lithium-ion energy storage system is overall inspired by technologies that have proven themselves in the Formula 1™ racing cars of the Mercedes-AMG PETRONAS F1 Team. The AMG High Performance battery offers high performance that is regularly and successively available. This increases the overall performance of the AMG GT Coupé. Added to this is the rapid energy consumption and high-power density. The high-performance battery offers a capacity of 6.1 kWh, 70 kW continuous power and 150 kW peak power. Charging takes place via the installed 3.7 kW on-board charger with alternating current at a charging station, wall box or household socket. The battery is designed for rapid power delivery and consumption and enables 13 kilometres of purely electric travel (EAER). - Auta a dopravní prostředky
Just wait until it gets dry…
Because? 🤔 They did not show everything CLEARLY. SCRATCH REMOVER then polished, so no problem what so ever
What happens when it dries mate?
I've buffed my windows with cerium oxide before, wet and dry showed big improvement
Он убрал водный камень
I work in a automobile glass window manufacturing company that processes ford-Mercedes windows I can promise you that window will be spotless
Just by your Avi Picture, i can tell you have zero real-life experiences, but comment only your "thoughts" on how you THINK things work out in the real world 😂
The special tool is a simple sander.
It has a polishing pad attachment
Haha yeah
Right lol
Better yet, it wasn’t running. Simple RainX was applied:
Not it's not. It's a square sander.
@@cwest394 If we're getting specific it's a 75x100mm pneumatic random orbital square sander. But what OP said is still correct, it definitely fits the definition of a simple sander.
Thats not a special tool is a mouse sander with a cloth instead of sand paper
Palm sander
A palm sander is now considered a "Special tool"
I think the tool they were talking about was the idiot with the sander
A palm sander could be a special tool in Africa.
"Special tool?" You mean a dual action sander?
Thats not a DA.
Yeah that is not a DA
Rain x will do just fine 😂😂
There went all the water beading capabilities of your window
That makes no sense. It what situation is water beating good? Polished windows when covered in water flow like there's nothing on it. Did you not watch what the water did after he spotted and hit it with the gd water hose? 😂 I don't unbeatable the people that liked this comment. I thought stupidity was one in every 100. Not this statically rampant.
@@noeaguinaga4018...water is made of polarized molecules, glass is made of polarized molecules. Water molecules, stick to glass. If I want to see through that water, reliably and safely, it helps if the water is beaded up, taking up less surface area of my windshield, giving me a less obstructed/distorted view, thus providing better visibility.... Over here stroking your ego and you don't even have common sense 😂🤡
@@noeaguinaga4018 you want it to bead, easier too see out of then. An even amount across window that destorts the view. Front windscreen is easier for wipers when beading
@@Jay-st6slthe water doesn't even lay on the polished glass surface. It's immediately gone. No beading necessary. Don't be an expert clown. It's not laying on the glass and bending light like you're trying to explain. You almost made some sense. 😂
@@Jay-st6slyou’re actually wrong but keep trying
Clay bars work amazing
Was looking for thus comment in matter of fact im gonna have to.do mines this weekend
shi play-doh works well too 🗣💯
Tiring
"hey dad what to use to wash the window?"
Dad: throws son sander 😂😂😂
@ReezLah. I had a conract removing paint overspray that hit 100 cars, 200 clay mitts 2 months and 3 elbows later I was finished hahahaha
All that protective coating gone. Good job.
What protective coating? If you're talking about window tint, that's on the inside
@@tom.c4062 there is always a protective coating on each glass that's on the car. Its applied after the glass is made. Not many people know it and I work with glass restoration. That's why you can see outline on the windshield where the wiper had been wiping for a long time.
@@user-ll8eo5yk3w I worked in glass manufacturing, wholesale/retail and installation for most of my life. Plus I've built cars for 30 years in my spare time. My common sense tells me you are wrong, but I'm willing to be proved wrong.
In all my years I've never heard of a protective layer on the outside of glass other than the hydroxy/enduro shield, Basically ceramic type coatings we use in the industry.
@@user-ll8eo5yk3w Manufacturing we make all types of glass from tempered, laminated, ethched, annealed, double/triple glazed.
I'm pretty sure automotive windows are just heat treated glass, apart from the windshield which is heat treated laminated glass. Hope you're not confusing laminated glass which has an internal plastic/resin layer sandwiched between 2 layers of glass
@@tom.c4062 I know my glass
So it holds onto the water? In the summer it’s like tint but harder to see through.
The half he polished repelled the water...detailers do this all the time...ever get your car detailed? Then likely they polished your glass...ceramic coat over that will make that effect mostly permanent, or for however long the coat is supposed to last.
Show it to me when it dries up 🤣
Glass is natural hydrophobic. Its the little nicks and smudges that cause it to lose that aspect. Hence the beading on most windows. Glass that smooth will eventually stop being hydrophobic as soon as he rolls that window down or even diving it cause of dirt.
Glass buffing compound and a micro fiber polishing cloth its to remove the baked on debris from the window
I ceramic coat all my cars windows with Adams graphene & ceramic coating
Adams graphene & ceramic coating
Adams graphene & ceramic coating
Adams graphene & ceramic coating
Lol🤪
Turtle Wax and Rain-X both do this and always have since the mid-60s
Yep bought a truck from a miner windows were coated with dust buster spray they use.. used em both..had to work a bit but it got em there eventually..👍✌️
But first you need to clean a glass and that's what he does
Mother's chrome polish will clean glass and shed water like rain-x. I believe it works a little better than rain-x. You're welcome.
Rain ex works good too.
Yo didn't see that bro on top in the back round until the video started again lol😂😂😂
Damn true, I got kinda shocked tbh
Use a lower grit to get it done faster👍
I'd go with a 36 grit belt sander. I'll be done before the shrooms kick in 🤪
LoL! 😂@@sockoblocko
Lmao
😂😂😂
Instructions unclear, used 80 grit, I don't have a window anymore
RainX does trick every time and keeps from the windows from fogging
Leaves shitgoo on the windows.
Well atleast I know you haven't read applications process. Once applied you wipe the excess off and you spray a light water mist over over the applied area. The mist will turn the foggy window in to crystal clear. The plastic film that this guy is standing down is a protective plastic film that keeps the glass from flying like shrapnel in an accident. So if you do this to your car Look forward to pulling glass out of your skin Even after the accident. @MrFriday83 I'd rather the shitgoo then to look like a pin cushion after a collision.
@@DriftingReaper there is no plastic film on side windows. You're talking about laminated glass, and that only goes on windshields, and even then the plastic is sandwiched between two pieces of glass, not put on the outside.
Side glass is designed to shatter, incase of emergency where someone might have to break a window to get in or out.
Don't act so smart.
I think he's using 50000 grit cerium oxide
Is that a real grit or you cracking a joke?😂
I prefer 40 grit. It works faster.
I tried cerium oxide. It took too long to actually make a difference. Maybe I didn’t have a good sander.
@@ajtoofly7315lmfao. I can’t tell either 😂😂😂😂
36 grit I like
80 grit will do the trick 😂😂😂
30
@@Kagdra_omen12
real question tho wouldnt using sandpaper ruin the tint n whats the difference using 80 or 30 ?
@@Kagdra_omen 12 grit will do
@@randomuser48737 nah just a rock off the street lol
I don’t think you want that. Literally ZERO water beading.
You want the water to bead, not stick to the window. Beading is water sticking to itself but not the car, what you saw in the video on the left side is water sticking to the glass as well as itself. That's exactly what you don't want, as it gives you water marks, attracts dirt, blocks visibility, can age your glass due to mineral absorption, etc.
It looks in the video as though the right side of the window is completely dry which is exactly what you want, and the left side has water sticking to the glass which is exactly what you don't want.
@@TheGamersRace well you're just wrong. The right side of the window is completely wet
Lol. They just sanded it. It has no coating or nothing on it hence the no beading.
@TheGamersRace you simple 😅
I use 4 aught steel wool and get amazing results…I can only imaging how smooth/clear that glass is in person
It’s just getting the road grime off. Not scratching it at all. You can use a razor blade or steel Wool does the same thing just takes a lot more effort
I get the same effect from Rain-x eiper fluid, and it's even easier to apply.
Any wax solution, rain x, ceramic coating etc will leave the window looking the same with less than 10%of the effort.
I bought some custom microfiber towels from a company called NORWEX they are made to clean without any soup or toxins . You use hot water and there cleaning towel witch is grey then use the purple one to polish. Cleaned my windows better then anything else ive done .its nice to clean your interior and clean the windows like that and the theres a good start to work with when your done you boil the clothes to clean them
Getting ready to throw a layer of clear over the windows
I do this with 80 grit sandpaper!! Works the best
Hahah the fact they just left all that shit on the clear coat like that...
that's a fkn sander ....
And this is why we call it a half assed job 😁
He just made it wetter and removed whatever properties that made water bead up. Now the water covers the whole window instead of beading off like it supposed to.
Takes off hard water spots?
Mother's chrome polish will since glass has a similar surface to chrome
Whats so special about a 1/4 sheet sander and 5,000 grit polishing paper ?
Where's the special tool ?
Um glad bro is up top.. very insightful
My guess is a rag with a product similar to rain-x
I think they trying to prove a product and he's sanding it to show that it won't come off
no.
You thought wrong lol
Nice Work 👏👌😎
yup true fact and you can leave of spot less if you put them water spot remover first than softly and gently in circulation motion with a 0000 steel wool and rinse than polish them mirrows 🤩
I use to do it at a body shop over 20 years ago worked great
Pretty cool. Rain-X is easier, but Mother's wax lasts 3 times as long.
Im glad your reaction contributed to the video
Super fine probably 5000 grit with Turtl wax Polishing Compound
What’s the special tool? You are just using a sander
What grit paper you use ?
Au moins du P12000
Wow didn't even know paper went past 3000 thank you
Remove ink without sanding
29000
40 😂
Air powered sander with wet and dry 😂 no special tools 😂
It's the 137th pass that really does the trick
Sand paper and water
me too i made polishing...it is work
Yup, still looks like a car window 👌
Does it also get rid of the scratches?
it can yes,also can get rid of water marks that are burnd into the said window, just need the right polishing compound.
Нормально линзу из стекла сделал! Продолжай так же переднее стекло тоже давай)
Почему линзу?
Боковое стекло у них выпуклое с завода
А показали простую полировку
Кстати лобовое тоже некоторые полируют
Полировка убирает микроцарапины и сколы, и воде труднее задержаться за гладкую поверхность, по этой причине полированная часть практически без капель
@@Bravo125 сколы не убирает полировка ) шлифовать можно и боковые и лобовое ( просто разница в том что одно коленное другое нет и лобоч можнно взорвать от нагрева ) просто нужно отдавать мастеру именно по стеклу , а не детелеру , которы только азы знает )
@@user-he7dw6fl8p сколы так же отличаются так же как и пенопласт по плотности и резина по жёсткости, все относительно
Просто есть сколы и царапины которые можно заполировать, а есть стекла которые прям убитые и непоможет полировка
Конечно лучше отдавать хорошим стекольшикам
@@Bravo125What did he use to polish the glass?
Looks like it is holding water to me.
The half of the window on the left is, but he polished the half on the right...water didn't even get it wet...polishing glass makes it hydrophobic
Have fun looking thru it when it dries 😂
I was waiting for the V8 Formula 1 car to shift up, then I looked at the video 😂
Make sure you're standing in a puddle of water while using a corded tool like this, it helps with the polishing. 🙄
The sanded or polished side held the water. Doesn't have a hydrophobic coat.
Just clay bar your glass and apply a thincoat of wax, works great plus lasts for months
Don't Steele other people's video 😔📸
I really need to know what tool and polishing compound he is using cause my windshield needs this done bad!!!
windex is a great product if this guy ever heard of it might save him all that trouble
Nothing's better window cleaner any buffer works every time
De que grano es la lija ??
I want to see that window after its dry, and see how badly that glass is hazed over from all the scratches
Its a buffer u flog
This is the absolute dumbest video. That window is destroyed unless you keep going with polishing, for awhile
Guy used a sponge pad and polishing compound…
You do know polishing windows is a real thing, right ?
Palm sanding windows
You could polish a ball of dirt with Some 6000 grit sand paper and a little bit of buffing compound
Ricky: I’m gonna polish ur windows smooth as glass.
Bobby: Wait wha?
Wait till the sun hits it😂😂😂😂
I wonder if this works for pits in the windshield?
just use "wurth thrue" spray it on and has the same effect
2000 grit easy peasy 😊
You can do the same thing with the clay bar.
Sanding the window.?
‼️‼️🤣✨
Polishing its called😂
2000 grit and up will polish . Yes it's sand paper. Look it up. I swear. The ignorance is on full tilt in the comment section. Just because you have never used it seen it, doesn't make it not so . At least, at fucking least, please for the love of your ego. Please research.... just look it up. Google it. Two to da head. Pop
That's the water sticking to the glass completely. The extreme opposite of what you want
Special tool? Its called wet sanding with any palm sander!
Now it's going to completely shatter when it gets hit. You took the glazing off is what you did.
Does this mean the window won’t get dirty ?
Nice matte windows
Wtf did i just watch
Oh but when it dries completely the shine will be history.
You can do that with quad (0000) steel wool and dawn.
Congratulations, youve polished off your rainx.
lol no cap I thought she was screaming at first 😂
Use SOS pads steel wool with the blue soap in them ,your windows will be perfect ,,just a light scrub
I used to do this by hand with turtle was. 😮
Clay mat?
I have a sander just like that 1. I'm going to try it😅
That is great for my car driver window scratch....(that is sander machine)
I didn't know Dave Chapelle had an interest in car glass.
Precision
I do it with a orbital polisher works way better
Steel wool would do it too.
That's sick
It's not just a "palm sander" it's a special extra fucking loud palm sander.
I do the same thing everyday with a 6" DA polisher...someone obviously has never seen a detailer work...
This fool just straight polished that glass. I didn't know this was doable. Holy s***, are you guys hiring apprentices?
Абсолютно такой же эффект о соды, пробовал на своей машине, но не надолго, в идеале надо консервировать стекло каким нибудь антидождь. Ну а вместо соды есть куча специальных проффесиональных средств