I Fixed the ATC600r & Went FULL SEND! (Its SCARY FAST NOW!)
Vložit
- čas přidán 9. 07. 2024
- After a few quick modifications we were able to get this cbr600 swapped honda atc200x (streetbike swapped) to hit REDLINE at 13,500 rpms and spin the tires like a hot knife through butter in EVERY GEAR! Its ridiculously stupid fast now. WATCH OUT RACING WORLD!
I Fixed the ATC600r & Went FULL SEND! (Its SCARY FAST NOW!)
Where i buy ALOT of OEM & Aftermarket atv parts! - Rocky Mountain ATV - www.rockymountainatvmc.com/?r...
If you didn't already and enjoyed the content hit that subscribe button! / @stupidfastjohn
Check us out on Facebook! - stupidfastjohn
Check us out on Instagram! - @stupidfastjohn & @cameramanwes
tiktok - @stupidfastjohn
Email me with ideas/info/tips whatever you want! - monstertruckfreak2013@gmail.com
Some of the links in the description are affiliate links. If you click on one and purchase, I’ll receive a small commission. This does NOT cost you anything & helps support the channel and allows me to continue making awesome videos like this for you guys to enjoy. Thank you for your support!
Making Crazy Trike 250cc , Make a Motorised Drift Trike with Basic Tools , Trike Drifting , Homemade Amazing Trike 200cc , '14 CBR 600RR Exhaust Sound , Best Honda CBR 600 exhaust sounds , Cheap vs. Expensive Three Wheeler Riding! , THIS SUZUKI HAYABUSA TURBO POWERED 3 WHEELER IS PURE EVIL!! , KILLWHEELER attempts the sinkhole , How is this Ninja
00:00 Introduction
01:37 jetting these carburetors
04:08 modifications
06:21 extended swingarm (fixing chain skip)
10:28 fun with Wes!
13:35 more issues!
15:27 finally ripping ass and tearing grass!
22:15 wes rippin it! - Auta a dopravní prostředky
I have an 86 atc250r,I know that 85,86 R's the front axle is supposed be behind the fork tubes,dudes often flip them with axle leading in drag racing. But when someone says your forks are backwards,they just don't know what they're talking about..100% fact..
I appreciate this info! I was back and fourth about it but didnt know for sure 🤙
💯, I think these forks are supposed to be "backwards" actually
Yeah just google Honda ATC poster / commercial :) @@StupidFastJohn
They are supposed to be backwards but what's backwards is the rotor is actually supposed to be on the other side so someone at some point put your fork tubes on the wrong sides.
Damn bro that thing looks fun as hell and life threatening at the same time.........I love it. Still needs some work but you'll get it.
Bro it is RIDICULOUS! 👊
Now she's a certified ripper you really don't want that thing to make any kind of traction!!!! Or you'll break it or flip it. You want all drifting out of it. Sick build dude
Hell yeah dude just a little more messing with the jets and your done dude now to find a nice stretch or road for a good test but be careful dude death trap so take it easy.
It’s crazy that’s it’s not way louder with those wide open pipes lmao love your mechanic mind bro keep up the creative vids
Ty man! Its always shocked me how the crotch rocmets arent as loud as car engines with open exhausts too 🤯
Look how close the headers get to the groung when yall get on it.maybe get a stiffer rear shock
Deadly build, she rips
Wider rear end man! That thing has some serious potential!! 👍🏻
just weld a plate into the rim and redrill the holes it will be alot stronger lol. with that chain being so long put a tensioner to be safe lol sick build,reminds me of my youth,step dad had a lt250 quad with a ft400 road bike motor insanely fast,we had to gear it down so we could use more than 2 gears haha
Need to jet that thing some more. She’s breaking up too much you can deff hear it
I support this channel
Extended swing arm pattle tires a dream in the dunes or night mare
Nice build bad ass
need to get a custom rear sprocket .. like a 71 tooth you will enjoy it more . you will be able to take off in second and will be in forth by the end of 300ft
I have kenda bear claw rear tires on my 650 swapped trike it roosters tails like a jet boat and still drifts like crazy and i can launch it.
It sounds like you need to ajust the air/fuel mixture screw because it goes from low 4k rpm to 9.5k rpm with no middle. And did you use the stock frame of the 650 and add the proper mounts?
Without question. That is one bad bitch!!!
The forks on your 200x aren't backwards trailing axle is oem.. The only sport atc with leading axle is the 85-86 350×.
Dang! Theres alot of misinformed people on the interwebs. Im still getting hammered about it 🤣🤙
@@StupidFastJohn I have 4 200x 83-86 and 5 250rs all are leading axle. Some people don't have a clue.
Now it needs a Mike Sabo makeover guys!!!!
100% agree
Be dope if could get it street legal 🔥🔥💯
This guy here i'm telling yall i dig this thing I want it or let me ride 1 time please me & him Could hang out and build stuff people would say not me I ain't riding that
well whatever you guy do with it I want to go and see it message when yall figure it out
BOOM! Goes the dynamite! Wicked build!
Thank you bro! Shes def sick af man 🤙
@@StupidFastJohn I'd be a bit afraid of it thats for sure.
🎉f*ck yeah! That's what I've been waiting for absolutely awesome f***ing rocket, give it a good once over sort the jetting and get that turbo on and booom fu***ng widowmaker 😂❤ awesome build ❤❤👊🏻
I tell you what i want to do to make a 3 wheeler for the sand dunes
Fucin insane
Why does the I4 need different jets for the inside carbs?
I'm not expert but I believe it's the way the carbs are set up for intake and exhaust and firing order for the engine. It's a weird science. I have a raptor 660r. They have 2 carbs and one side is a larger jet size than the other factory. My guess is there's fuel coming in from one side of the carb and traveling through other jets further away. It's like a garden hose. If you have a spray nozzle on a 25 foot hose it sprays hard then you add another 25 feet with a sprinkler head then the sprayer the pressure drops through the whole system. That's why I think there's different jet sizes throughout. To regulate pressure.
I think it is just to keep them inner cylinders richer to cool them down. Otherwise they get to hot in the center
@@manenemy7406 makes sense
Is that a vmax4 casually chilling on the trailer
Yes 😅🤯
Sounds like it needs higher on the mains. Full throttle breaks up too much
Yup your spot on shes a touch lean yet.
@@StupidFastJohn exactly what I was thinking. Still runs like a pissed off latina though 😂
@@OperatorASFSi Senor!
Now you have to rev it up like that at Wes’s shop
Or a whole block burnout? 🤔
It's only running at half power. Put a new exhaust put on it and figure out haw to get her running at full potential and put nobbys on it
It's still not running right. I had a 1998 CBR600F3 which that engine your using in that trike. That motor I can tell your only getting half power off it. Get that thing running right
How do the mount holes on a wheel just eat themselves away like that holy hell 🤯
Mooo powaaaaa! 🤣🤙
Loose nuts vibration shitty wheels etc etc lots bro 😂👌
Needs a bigger rear sprocket
It honestly looks really underpowered. It’s clearly not running right you can hear it breaking up
Runs like crap....
My 250 bogs out if I dump the throttle
Once you get it dialed you should invite @shredeighty he loves 3 wheelers