Orientation Why it's important - Lychee Slicer | 3D Printing
Vložit
- čas přidán 9. 11. 2022
- Orientation Why it's important - Lychee Slicer | 3D Printing - Featuring Crippled God Foundry - The Rotting One Series Minis
Today we cover orientation and why it can have such a big effect on a print. The peel force or amount of peeling that has to occur can be greatly reduced and mitigate damage to the model as well by using a good angle for supporting. This can be for hollowed or non-hollow models.
printmymini.com/
/ @iprint3dminis
/ printmy3dmini
www.etsy.com/shop/PrintMyMini
Good luck, we look forward to the comments.
Check us out on Instagram too:
/ printmy3dmini
Just give us a follow on instagram, and be sure to share this with your friends!
My Lychee Slicer support settings for minis.
Super Light and Light supports
1.15 - 1.22 bar diameter
0.22 - 0.15 tip diameter
3.10 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .29, raft is .50
Mediums
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.00 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
I rarely use heavy supports, but these are my settings for HEAVY
Heavy
1.55 - 1.75 bar diameter
0.55 - 0.75 tip diameter
4.00 - 5.35 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
Happy printing! - Věda a technologie
![3D resin print supports [EASY GUIDE]](http://i.ytimg.com/vi/MU0Cq_bjhy4/mqdefault.jpg)
Interesting.... I'm sure there will be a lot of trial and error for me! Thanks for sharing!
Yes, that is usually the case especially if the parts have a lot of details to consider.
Good view💫
wow very nice mannnn.💖💖💖
Cool vid, I was impressed🤎💜🖤
fascinating🔝
Keep it up’☺️☺️
Great🧡❤️
nice i like it💕💕💕
woow so nicee❣️💘💝
amazing💝💝
very good video💙💝💖
wonderful! ❤️
love it !💙💚
Nice content😻
nice video keep💓💓
Great Video Love it !!!😍👌
Thanks!
nice vid i rlly enjoyed it💙💚💛
Thank you! We appreciate it!
isn't it the fastes just to lay it vertical on the build plate? why nobody is doing it? there must be a reasson lol can anybody explain to me?
I mean it depends. What I look at when I orient an object I look at over hang positions, flat plans, and how they might be changed by tilting and rotating the object. Also, this is massively important when doing hollows, so know where to put the holes.
Why does the audio keep disappearing?
My new videos are much better.
Support pimples gonna ruin your day.
Always, hate my print has a bunch of pimples.